Loading...
HomeMy WebLinkAbout01.2-1.x-100-Weights-and-Dimensions-r3.pdf imagination at work © 2013 General Electric Company. All rights reserved. GE Power & Water – Original Instructions – Technical Documentation Wind Turbine Generator Systems 1.6-100 50 & 60 Hz 1.7-100 50 & 60 Hz Weights and Dimensions GE Power & Water – Original Instructions – imagination at work 1.6_1.7-100_xxHz_GD_allComp_ContrDocW&D.ENxxx.03.docx www.ge-energy.com Visit us at www.ge-renewable-energy.com All technical data is subject to change in line with ongoing technical development. Copyright and patent rights This document is to be treated confidentially. It may only be made accessible to authorized persons. It may only be made available to third parties with the expressed written consent of General Electric Company. All documents are copyrighted within the meaning of the Copyright Act. The transmission and reproduction of the documents, also in extracts, as well as the exploitation and communication of the contents are not allowed without express written consent. Contraventions are liable to prosecution and compensation for damage. We reserve all rights for the exercise of commercial patent rights.  2013 General Electric Company. All rights reserved. GE and are trademarks and service marks of General Electric Company. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies. GE Power & Water – Original Instructions – Weights and Dimensions CONFIDENTIAL - Proprietary Information. DO NOT COPY without written consent from General Electric Company. UNCONTROLLED when printed or transmitted electronically. © 2013 General Electric Company. All rights reserved 1.6_1.7-100_xxHz_GD_allComp_ContrDocW&D.ENxxx.03.docx x Table of Contents 1 Introduction.................................................................................................................................................................................................................. 5 2 Tower Sections Weights and Dimensions ................................................................................................................................................... 5 3 Hub and Nose Cone Assembly .......................................................................................................................................................................... 6 4 Blades .............................................................................................................................................................................................................................. 6 5 Machine Head............................................................................................................................................................................................................. 6 6 Down Tower Assembly Components ............................................................................................................................................................ 6 7 Single Components .................................................................................................................................................................................................. 6 GE Power & Water – Original Instructions – Weights and Dimensions CONFIDENTIAL - Proprietary Information. DO NOT COPY without written consent from General Electric Company. UNCONTROLLED when printed or transmitted electronically. © 2013 General Electric Company. All rights reserved 1.6_1.7-100_xxHz_GD_allComp_ContrDocW&D.ENxxx.03.docx 5/6 1 Introduction This document provides the estimated weights and dimensions of the 1.6-100 and 1.7-100 wind turbine generator systems. The weights and dimensions herein do not include the weights and dimensions of the shipping frames/fixtures. Actual weights may vary depending on final configuration. All weights must be verified prior to installation and transportation. 2 Tower Sections Weights and Dimensions The 1.6-100 and 1.7-100 are available at 80 m and 96 m hub heights. The following tables give the weights and dimensions of the tower sections for each tower. Section Total Weight (kg) Total Weight (lb) Total Length (m) Total Length (ft-in) Dia.Top (m) Dia.Top (ft-in) Dia.Bottom (m) Dia.Bottom (ft-in) Top 34080 75134 29.5 96' 8" 2.6 8' 7" 3.4 11' 2" Mid 41174 90773 25.9 85' 3.4 11' 2" 4.3 14' 1" Base 51696 113970 21.9 71' 11" 4.3 14' 1" 4.6 14'11” Table 1: 80 m HH Section Total Weight (kg) Total Weight (lb) Total Length (m) Total Length (ft-in) Dia.Top (m) Dia.Top (ft-in) Dia.Bottom (m) Dia.Bottom (ft-in) Top 28100 61950 24.0 78' 11" 2.6 8' 7" 4.3 14' 1" Mid A 39561 87217 24.0 78' 11" 4.3 14' 1" 4.3 14' 1" Mid B 48312 106510 24.0 78' 11" 4.3 14' 1" 4.3 14' 1" Base 59299 130732 21.2 69' 7" 4.3 14' 1" 4.6 14'11” Table 2: 1.6-100 96 m HH Section Total Weight (kg) Total Weight (lb) Total Length (m) Total Length (ft-in) Dia.Top (m) Dia.Top (ft-in) Dia.Bottom (m) Dia.Bottom (ft-in) Top 28500 62832 24.1 78' 11" 2.6 8' 7" 4.3 14' 1" Mid A 50993 112420 24.1 78' 11" 4.3 14' 1" 4.3 14' 1" Mid B 63912 140902 24.1 78' 11" 4.3 14' 1" 4.3 14' 1" Base 64754 142758 21.2 69' 7" 4.3 14' 1" 4.6 14'11” Table 3: 1.7-100 96 m HH GE Power & Water – Original Instructions – Weights and Dimensions CONFIDENTIAL - Proprietary Information. DO NOT COPY without written consent from General Electric Company. UNCONTROLLED when printed or transmitted electronically. © 2013 General Electric Company. All rights reserved 6/6 1.6_1.7-100_xxHz_GD_allComp_ContrDocW&D.ENxxx.03.docx 3 Hub and Nose Cone Assembly This section gives the maximum weights and dimensions of the hub assembly with shipping fixtures. Weight (kg) Weight (lbs) Length (m) Length (ft-in) Diameter (m) Diameter (ft-in) Height (m) Height (ft-in) 28000 61729 3.8 12’ 7” 3.2 10’ 6“ 4.7 15’ 4” Table 4: Weights and dimensions of the hub 4 Blades This section gives the weight of a single blade including the bolts but the dimensions are for the blades only. Weight (kg) Weight (lbs) Length (m) Length (ft-in) Diameter (m) Diameter (ft-in) 8925 19676 48.7 159’ 9” 2.9 9’ 7” Table 5: Weights and dimensions of a single blade 5 Machine Head This section gives the weights and dimensions of the nacelle and its internal components and excludes the hub and blades. Weight (kg) Weight (lbs) Length (m) Length (ft-in) Width (m) Width (ft-in) Height (m) Height (ft-in) 66500 146607 8.8 28’ 10” 3.6 11’ 10” 3.8 12’ 6” Table 6: Weights and dimensions of the nacelle 6 Down Tower Assembly Components This section gives the weights and dimensions for the controller only in the down tower assembly. Component Weight (kg) Weight (lbs) Length (m) Length (ft-in) Width (m) Width (ft-in) Height (m) Height (ft-in) Controller 2700 5952 2.3 7’ 7” 0.9 2’ 11” 2.7 8’ 10” Table 7: Weights and dimensions of the down tower assembly components 7 Single Components This section gives the weights and dimensions of the major components that are located in the nacelle. Component Weight (kg) Weight (lbs) Length (m) Length (ft-in) Width (m) Width (ft-in) Height (m) Height (ft-in) Gearbox 16500 36376 2.7 8’ 10” 2.5 8’ 2” 2.4 7’ 10” Generator 8450 18629 3.4 11’ 3” 1.62 5’ 4” 2.2 7’ 3” Table 8: Weights and dimensions of single components