No preview available
HomeMy WebLinkAboutNSF Enfield - Solar Decommissioning Plan Without Scrap Value - 12.1.20201 Solar System Decommissioning Plan Without Scrap Value Decommissioning costs are equal for all four sites listed below: ▪ NSF Enfield Site 1, LLC ▪ NSF Enfield Site 2, LLC ▪ NSF Enfield Site 3, LLC ▪ NSF Enfield Site 4, LLC Synopsis A. Solar System Lifespan B. Cost of Decommissioning C. Ensuring Funds For Decommissioning and Site Restoration D. Solar System Decommissioning Description D.1. Removal of Electrical Components, Racks & Rack Wiring D.2. PV Module Dismantling & Panel Removal D.3. Breakup and Remove Concrete Pads or Ballast D.4. Remove Cables D.5. Remove Fence D.6. Grading and Road Removal D.7. Seed Disturbed Area A. Solar System Lifespan Owner of Sites located at 00 Applegate Road South, Ithaca, NY 14850 (“Project”), to be subdivided, is responsible for decommissioning the Project. Commercial-scale solar fields are designed for a minimum expected operational life of 25 years but may operate for 40 years or more. As the solar field approaches the end of its operational life, it is expected that technological advances will make more efficient and cost-effective solar arrays that will economically drive the replacement of the existing solar arrays. The decommissioning plan provides financial assurance that there will be sufficient funds available for decommissioning and site restoration when the solar arrays have reached the end of their useful life. B. Cost of Decommissioning The cost of decommissioning a solar array more than 20 years into the future cannot be known with exact certainty. However, given the cost of components today, and the salvage value associated with such components today, one can begin to have an educated estimate as to the cost of salvage. For purposes of the Project, this means that the cost of decommissioning the solar arrays will be offset by the salvage value of the solar panels and components. As of the date of this plan, the estimated salvage value is expected to exceed the decommissioning costs. 2 NSF Enfield Decommissioning Costs Per 5 MW System # Task Estimated Cost D1 Remove Electrical Components, Racks & Rack Wiring $ 36,315.00 D2 PV Module Dismantling Removing Panels $ 30,875.00 D3 Breakup and Remove Concrete Pad or Ballast $ 38,375.00 D4 Remove Cable $ 18,750.00 D5 Remove Fence $ 14,875.00 D6 Grading/Roadway Removal $ 10,000.00 D7 Seed Disturbed Area $ 1,375.00 Cost: Labor and Equipment to Decommission $ 150,565.00 Total After 20 Years (2.5% Inflation Rate) $ 225,847.50 Four 5 MW systems, each with a Current Net Income of $150,565.00 per system, totaling $602,260. C. Ensuring Funds For Decommissioning and Site Restoration The estimated cost of decommissioning and the estimated salvage value as provided above will be updated upon commencement of commercial operations. In the event that the updated cost of decommissioning exceeds the estimated salvage value, the balance shall be funded in equal annual installments over the first ten years of Project operations. On or prior to December 31 of each calendar year beginning with the calendar year in which the Project commences commercial operations through and including calendar year 10, an amount based on the estimate provided herein, if any, to be updated upon commencement of commercial operations, shall be reserved for decommissioning and site restoration. Such annual amounts may be in the form of a performance bond, surety bond, letter of credit, parental guaranty or other form of financial assurance acceptable to the Siting Council (the “Financial Assurance”). On or prior to the end of calendar year 15 of the Project’s operation, the estimated costs of decommissioning and the estimated salvage value will be reassessed and an amount equal to the balance of such updated estimated cost of decommissioning (minus salvage value) less the amounts reserved, if any, will be reserved for decommissioning and site restoration. The Financial Assurance shall be kept in place until such time as the decommissioning work has been completed, provided, however, to the extent available as liquid funds, the Financial Assurance may be used to offset the costs of the decommissioning. D. Solar System Decommissioning Description Decommissioning and restoration activities will adhere to the requirements of appropriate governing authorities, and will be in accordance with applicable federal, state, and local permits. 3 The decommissioning and restoration process comprise removal of above-ground structures; grading, to the extent necessary; restoration of topsoil (if needed) and seeding. The process of removing structures involves evaluating and categorizing all components and materials into categories of recondition and reuse, salvage, recycling and disposal. The above-ground structures and below-ground structures are collectively referred to herein as the “Project Components.” Temporary erosion and sedimentation control best management practices will be used during the decommissioning phase of the Project. Control features will be regularly inspected during the decommissioning phase and removed at the end at the process. D.1. Removal of Electrical Components, Racks & Rack Wiring Control cabinets, electronic components, and internal cables will be removed. The panels, racks and inverters will be lowered to the ground where they may be transported whole for reconditioning and reuse or disassembled/cut into more easily transportable sections for salvageable, recyclable, or disposable components. D.2. PV Module Dismantling & Panel Removal Solar photovoltaic modules used in the Project are manufactured within regulatory requirements for toxicity based on Toxicity Characteristic Leaching Procedure (TCLP). The solar panels are not considered hazardous waste. The panels used in the Project will contain silicon, glass, and aluminum which have value for recycling. Modules will be dismantled and packaged per manufacturer or approved recyclers specifications and shipped to an approved off-site approved recycler. D.3. Breakup and Remove Concrete Pads or Ballast Pads will be excavated to a depth sufficient to remove all anchor bolts, rebar, conduits, cable, and concrete to a depth of 24 inches below grade. The remaining excavation will be filled with clear sub- grade material of quality comparable to the immediate surrounding area. The sub-grade material will be compacted to a density similar to surrounding subgrade material. All unexcavated areas compacted by equipment used in decommissioning shall be de-compacted in a manner to adequately restore the topsoil and sub-grade material to the proper density consistent and compatible with the surrounding area. Concrete slabs used as equipment pads will be broken and removed to a depth of two feet below grade. Clean concrete will be crushed and disposed of off-site and/or recycled and reused either on or off-site. D.4. Electrical Cable Removal Electric wire made from copper or aluminum has value for recycling. DC wiring can be removed manually from the panels to the inverter. Underground wire in the array of the array will pulled and removed from the ground. Overhead cabling for the interconnection will be removed from poles. All wire will be sent to an approved recycling facility. 4 D.5. Fencing and Racking Removal All racking and fencing material will be broken down into manageable units and removed from facility and sent to an approved recycler. All racking posts driven into the ground will be pulled and removed. D.6. Grading and Road Removal During decommissioning, the processed stone access roads will be stripped exposing the geotextile beneath. The geotextile will then be removed and disposed revealing the original soil surface. The compacted soil beneath the road fill may require ripping with a subsoiler plow to loosen it before it can be returned to crop production. D.7. Seed Disturbed Areas Following decommissioning activities, the sub-grade material and topsoil from affected areas will be de- compacted and restored to a density and depth consistent with the surrounding areas. If the subsequent use for the Project site will involve agriculture, a deep till of the Project site will be undertaken. The affected areas will be inspected, thoroughly cleaned, and all construction-related debris removed. Disturbed areas will be reseeded to promote re-vegetation of the area, unless the area is to be immediately redeveloped. In all areas, restoration shall include, as reasonably required, leveling, terracing, mulching, and other necessary steps to prevent soil erosion, to ensure establishment of suitable grasses and forbs, and to control noxious weeds and pests. Decommissioning and Restoration Terms The Project shall be decommissioned within 360 days of the end of the Project’s operational life. Areas disturbed during the decommissioning phase will be with seeded with a drought-tolerant grass seed mix appropriate for the area, unless such areas are being immediately redeveloped for other uses. The gravel access road will remain intact.