HomeMy WebLinkAboutSubmittal02_DWV FittingsSUBMITTAL TRANSMITTAL
Project Name: Ithaca Arthaus
Project Number : 18260
A
To: Vecino Construction, LLC Date Submitted
Attn:Submittal No. (per Procore)
X
From:
X
Item
No.
Spec
Paragraph /
No.Submittal Type Lead Time
1 SD
2 PD
3 PD
4 PD
5 PD
6 PD
7
8
9
10
11
Comments:
2/26/2020
DateSignature/Stamp of Transmitter
Vecino Construction Stamp BW A&E Stamp
2/26/2020
22 14 13
22 14 13
Edger Enterprises of Elmira, Inc.
Dwg. And/or Specification
Section
Precast Storm Structures
Title / Description
ReSubmitted for Review & Approval REV (1)
Submitted for Review & Approval REV (0)
This is a FULL SUBMITTAL
This is a PARTIAL Submittal
Corey Olmstead
corey@vecinogroup.com
Phone: (315) 854-0979
Zeiser Vault
Manufacturer
Core & Main
Sch 40 PVC Pipe
DWV Fittings
Core & Main
Transmittal (from SUBCONTRACTOR)
22 14 13
22 14 13
22 14 13
Jordyn Confer
Non-Woven Fabric
Core & Main
Core & Main
Core & Main
Fernco Fitting
Storm Pipe
22 14 13
22 14 13 001 R0 Facility Storm PD & SD
Submittal Transmittal
of TrTrTrTrTTTrTrTrTrTTTTTTrTrTrTrTrTTTTTrTrTrTrTTTrTrTrTTTTTTTTTTTTTrrrTrTrTTrTTrrrrrTrTrrTrTTTTTrrTTTTrTrTrrTTTrTrrTTTrrTTTrTrrTTTrTrrTrTTrTTTTransmimiiitititmiititiiiiitittmiiiiitiiiiittmitiiiiiimititiiitittittmitiiitttmiiiitiitiititmiiitmiiitiitiittmmiittttttttteteteterttttttettttetetttttetttttttetttttttttttetttttttttttttttttttt
Submittal Cover Sheet
Contractor:
Address:
Ph / Fax:
Project:
To:
Attn:
Enclosed:All of the following Mfr. Cert/Warranty
Shop Drawings Details Test Reports
X Product Data Schedules Sample (2)
Description:
Supplier:
Manufacturer:
Reference:Specification Number: Drwg No:
Article number: Drwg Det:
Paragraph: Other:
Architect 's Approval:
(A) Approved
(A/N) Approved As Noted
(RR) Revise and Resubmit
This is our 1st submittal for this item.(REJ) Rejected
(SUB) Submit Specified Item
Signed by:
BY:
Date:
330 E. 14th Street, Elmira Heights, NY 14903
Phone: (607) 733-9664 Fax: (607) 733-3951
N/A
Corey Olmstead
Corey Olmstead
This submittal is a substitute to the
specified product.
For Architects / Engineers Approval
Reviewed for general compliance of
specifications.
Checking is only for general compliance with the design concept of the project and
general compliance with the information given in the contract documents. Any action
shown is subject to the requirements of the plans and specifications. Contractor is
responsible for dimensions which shall be confirmed and correlated at the jobsite;
fabrication processes and techniques of construction; coordination of his work with
that of all other trades; and the satisfactory performance of his work.
DWV Fittings
Edger Enterprises of Elmira, Inc.
Ithaca Arthaus
Date of Submission:
Contractor's Approval:
02/21/20
Edger Enterprises of Elmira, Inc.
330 E. 14th Street
Elmira Heights, NY 14903 Phone: (607) 733-9664
Fax: (607) 733-3951
V-1, rev. 3/02
sion:
REVIEW
DATE PRODUCT DESCRIPTION
ACCEPTED ACCEPTED AS CORRECTED
REVISE AND RESUBMIT REJECTED – SEE REMARKS
REMARKS:
1. This approval is given subject to any corrections noted on the drawing, and subject to the condition that
proper connection or requisite fitting of parts either to adjacent work or to parts of the same work, or
for fully complying with the requirements of the contract drawings and specifications.
2. Acceptance is only for conformance with the design concept of the Project and compliance with the
information given in the Project Manual. Contractor is responsible for dimensions to be confirmed and
correlated at the job site for information that pertains solely to the fabrication processes or to techniques
of construction, for coordination of the work of all trades, and performing his work in a safe and satisfactory
manner.
3. All measurements and conditions shall be checked and verified by the Contractor at the site.
4. Corrections shown on this drawing shall not be deemed an order for extra work.
5. No change shall be made on any approved drawing without written authorization.
SIGNED:ͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺͺ
Shop Drawing 5HYLHZ
Fagan Engineers & Land Surveyors, P.C.
113 East Chemung Place, Elmira, New York 14904 | P 607.734.2165 | F 607.734.2169 | FaganEngineers.com
352-(&7 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
2:1(5 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
(1*,1((5 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
&2175$&725 BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
)(352-(&712 BBBBBBBBBBB
orization.
Ithaca Arthaus 2018-089
Vecino Group
Fagan Engineers & Land Surveyors, P.C.
Edger Enterprises
02-28-20 DWV Fittings
Brian M. Grose, EIT
Staff Engineer