HomeMy WebLinkAbout223500-1.0 - Hot Water Storage Tank-PD REVIEWED AND APPROVEDSubmittal Transmittal
SUBMITTAL TRANSMITTAL
Project Name: Ithaca Arthaus
Project Number : 18260
A Transmittal (from SUBCONTRACTOR)
To:Vecino Construction, LLC Date Submitted 6/30/2020
Attn:Corey Olmstead Submittal No. (per Procore)
corey@vecinogroup.com x Submitted for Review & Approval REV (0)
Phone: (315) 854-0979
ReSubmitted for Review & Approval REV (1)
From:Woodcock & Armani
mike.meyer@comfortsystemsusa.com This is a FULL SUBMITTAL
315-701-2042
This is a PARTIAL Submittal
Item
No.
Dwg. And/or Specification
Section
SpecParagraph /
No.Title / Description Manufacturer Submittal Type Lead Time
1 223500 1.1B1 Hot Water Storage Tank product data Sanden/Lochinvar
2 223500 1.1B2 Hot Water Storage Tank labeling Sanden/Lochinvar
3 223500 1.1C Hot Water Storage Tank warranty Sanden/Lochinvar
4
5
6
7
8
9
10
11
Comments:Vecino Construction Stamp BW A&E Stamp
Signature/Stamp of Transmitter Date
SUBMITTAL : ECO-505GLNST
505 Gallon Storage Tank
Job Name Location
Purchaser Engineer
Submitted to Reference Approval Construction
Unit Designation Schedule #
Specifications GS3-45HPA-US Construction
Performance The tank shall be manufactured from carbon steel with
Capacity per Heat Pump 4.5kw or 15,400 Btu/h a baked on Ultonium porcelain enamel lining lining
Recovery per HP @ 90°F Rise 20.5 Gallons per Hour Tank outer shell shall be covered with a spray on foam
insulation with an acrylic top coat to allow both interior and
Storage Tank ECO-505GLNST exterior installation
Tank Volume Actual/Nominal 505 / 558 Gallons
Pressure Relief Valve (Psig & °F )125 Psig Insulation
Temperature Sensor Thermistor A minimum of 2 1/4" of R7.5 insulation shall be sprayed on
Tank Weight (lbs)874lbs to the tank to reduce heat loss and comply with California
Anodes 3 x Magnesium Title 24 requirements
Tank Connection Sizes Connections
Cold Water Inlet 3" NPT Connections to the Hot and Cold building supplies shall be
Hot Water Outlet 3" NPT 3" NPT Female type
Cold Water to Heat Pump 1 1/2" NPT Connection to Cold supply from the tank to the Heat Pump
Hot Water Return from HP 1 1/2" NPT shall be 1 1/2" NPT male type
Connection to Hot return from the Heat Pump to the tank
Pipe Size - Tank to Heat Pump shall be 1 1/2" NPT female type
Cold Water pipe - Tank to HP As designed
Hot Water pipe - HP to Tank As designed Controls
Max Pipe Length inc 50ft The tank shall be supplied with a Temperature sensor
Max Vertical Separation of 16ft well where the sensors can be installed
Each Heat Pump shall requires it's own Temperature
Approvals Sensor or the Eco-Mcontrol can be used which requires
Tank ASME a single tank temperature sensor
All sensors shall be field installed
Warranty
Tank 5 Years Pressure and Temperature Relief
Tank shall be supplied with a factory installed
Pressure relief valve
Settings shall be at 125 Psig
Eco2 Systems LLC PO Box 1358, Walled Lake MI 48390, Tel : 1-844 SAND CO2 (1-844 726 3262)
Due to Eco2 SystemsLLC's policy of on-going product development specifications are subject to change without notice SUB-ECO2-ECO505-062020
www.sandenwaterheater.com
SUBMITTAL : ECO-505GLNST
505 Gallon Storage Tank
Job Name Location
Purchaser Engineer
Submitted to Reference Approval Construction
Unit Designation Schedule #
Storage Tank Dimensions
Eco2 Systems LLC PO Box 1358, Walled Lake MI 48390, Tel : 1-844 SAND CO2 (1-844 726 3262)
Due to Eco2 SystemsLLC's policy of on-going product development specifications are subject to change without notice SUB-ECO2-ECO505-062020
www.sandenwaterheater.com