Loading...
HomeMy WebLinkAbout22 0523 General Duty Valve submittal REVIEWED AND APPROVEDSubmittal Transmittal SUBMITTAL TRANSMITTAL Project Name: Ithaca Arthaus Project Number : 18260 A Transmittal (from SUBCONTRACTOR) To:Vecino Construction, LLC Date Submitted Attn:Corey Olmstead Submittal No. (per Procore) corey@vecinogroup.com Submitted for Review & Approval REV (0) Phone: (315) 854-0979 ReSubmitted for Review & Approval REV (1) From:Woodcock & Armani mike.meyer@comfortsystemsusa.com This is a FULL SUBMITTAL 315-701-2042 This is a PARTIAL Submittal Item No. Dwg. And/or Specification Section SpecParagraph / No.Title / Description Manufacturer Submittal Type Lead Time 1 22 0523 2.2 E Ball Valves Apollo 2 22 0523 2.2 F Check Valves Nibco 3 4 5 6 7 8 9 10 11 Comments:Vecino Construction Stamp BW A&E Stamp Signature/Stamp of Transmitter Date SUBMITTALSHEET This specification is provided for reference only. Apollo reserves the right to change any portion of this specification without notice and without incurring obligation to make such changes to Apollo products previously or subsequently sold.Most current information available at apollovalves.com. (704) 841-6000apollovalves.com DESCRIPTION The Apollo InternationalTM 94ALF-A Lead Free* Forged Brass Ball Valve combines reliable operation with maximum economy. Featuring multi-agency approvals, the 94ALF-A is ideal for gas, fuels, fire protection and general plumbing and HVAC applications including potable water. Valves are ANSI 3rd party lead free* certified. STANDARD MATERIALS LIST BODY Lead Free Brass (DZR) RETAINER Lead Free Brass (DZR) BALL 1/4" - 1"Lead Free Brass (DZR), Chr. Plated BALL 1-1/4"- 4"SS Type 316 STEM Brass C36000 STEM SEAL/O-RING EPDM SEATS PTFE STEM PACKING PTFE GLAND NUT Brass, C37700 SEAL PTFE HANDLE Steel, Plated (with PVC grip) HANDLE NUT Steel, Plated DIMENSIONS PARTNUMBER SIZE(IN.) DIMENSIONS (IN.)WT. (LB.) KIT OPTIONS A B C D E 2-1/4” STEM EXTENSION + MEMORY STOP REPLACEMENT LEVER HANDLES NPT94ALF-101-01A 1/4"0.39 1.76 1.73 3.54 -0.3 78217101 W23470094ALF-102-01A 3/8"0.39 1.76 1.73 3.54 -0.3 94ALF-103-01A 1/2"0.58 2.05 2.04 3.54 -0.4 78217201 W234800 94ALF-104-01A 3/4"0.75 2.36 2.26 3.78 -0.7 78217301 W234900 94ALF-105-01A 1"0.95 2.76 2.58 4.53 -1.1 78217401 W235000 94ALF-106-01A 1-1/4"1.26 3.31 3.05 4.53 -1.6 78217501 W235100 94ALF-107-01A 1-1/2"1.58 3.66 3.37 5.51 -2.4 78217601 W235200 94ALF-108-01A 2"1.97 4.18 3.70 6.30 -3.4 W283000 94ALF-109-01A 2-1/2"2.52 5.38 4.65 8.66 -7.6 78217701 W23530094ALF-100-01A 3"2.95 6.04 4.97 8.66 -9.3 94ALF-10A-01A 4"3.95 7.39 6.13 11.02 -16.9 78217801 W273800 SOLDER94ALF-203-01A 1/2"0.58 2.05 1.84 3.54 0.63 0.4 78217201 W234800 94ALF-204-01A 3/4"0.75 2.75 2.14 3.78 0.88 0.7 78217301 W234900 94ALF-205-01A 1"0.95 3.31 2.45 4.53 1.13 1.1 78217401 W235000 94ALF-206-01A 1-1/4"1.26 3.82 3.04 4.53 1.38 1.4 78217501 W235100 94ALF-207-01A 1-1/2"1.58 4.43 3.17 5.51 1.63 2.2 78217601 W235200 94ALF-208-01A 2"1.97 5.38 3.49 6.30 2.13 3.0 W283000 94ALF-209-01A 2-1/2"2.52 6.28 4.66 8.66 2.63 6.4 78217701 W23530094ALF-200-01A 3"2.95 7.15 4.87 8.66 3.13 8.5 94ALF-20A-01A 4"3.95 9.28 5.87 11.02 4.13 15.8 78217801 W273800 E A B D C D C A B E A B D C D C A B **94ALF-2xx intended for soft solder installation using solders with melting temperature < 500°F. FEATURES • EZ SolderTM Lead Free Materials** • Distinctive White “Lead Free” Handle Grip• 2-Piece, Full Port Design • Blowout-Proof Stem • 100% Factory Testing • Adjustable Stem Packing Nut • Multiple Agency Approvals• Stem Seal O-Ring (Solder Version 1/2” - 2”) PERFORMANCE RATING • 600 CWP – 1/4” to 2” • 400 CWP – 2-1/2” to 4” • Temperature Range: 0°F to 400°F *LEAD FREE: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with Federal Public Law 111-380. ANSI 3rd party approved and listed. Job Name: Job Location: Engineer: Contractor: Tag: PO#: Rep: Wholesale Dist.: Full Port Brass Ball Valve 94ALF-A Series LEAD FREE SS1186 © 08/19 Page 1 of 1 APPROVALS • NSF/ANSI/CAN 61 - Water Quality • NSF/ANSI 372 - Lead Free• IAPMO/ANSI Z1157 FM LISTED • FM 1140 Fire Protection Quick Opening Valves CSA LISTED (File # 226234) per the following standards: • ANSI Z21.15 (1/2 psi) (CSA 9.1) (1/4” – 2”)• ASME B16.44 (5 psi) (CR91-002) (1/4” – 2”) • ASME B16.33 (125 psi) (CGA 3.16) (1/4” – 2”) UL LISTED • UL 125 - Flow Control Valves for LP-Gas, Guide YSDT to 250 psi max • UL 258 - Fire Protection Trim & Drain, Guide VQGU to 175psi max (1/4” – 2”)• UL 842 - Valves for Flammable Fluids, Guides YRBX, YRPV, and MHKZ to 250 psi max. (1/4” - 4” NPT only) • UL 1477 - Compressed Gas Shutoff Valves, Guide YQNZ to 250 psi max (1/4” - 4” NPT only)*Gas approvals apply to NPT models only www.nibco.com AHEAD OF THE FLOW® NIBCO INC. WORLD HEADQUARTERS • 1516 MIDDLEBURY ST. • ELKHART, IN 46516-4740 • USA • PH: 1.800.234.0227 TECH SERVICES PH: 1.888.446.4226 • FAX: 1.888.336.4226 • INTERNATIONAL OFFICE PH: +1.574.295.3327 • FAX: +1.574.295.3455 www.nibco.com 29 LEAD-FREE: Weighted average lead content ≤ 0.25% NIBCO check valves may be installed in both horizontal and vertical lines with upward flow or in any intermediate position. They will operate satisfactorily in a declining plane (no more than 15º). Install check valves as far from pump discharge or line direction change as possible and at a minimum length of 5 times the pipe diameter. T-413-Y-LF Threaded S-413-Y-LF Solder S-413-Y-LFC x C T-413-Y-LFNPT x NPT Lead-Free Bronze Check Valves Features: Silicon Performance Bronze® Alloy • Horizontal Swing • Regrinding Type • Y-Pattern • Renewable Seat and Disc Approvals: Conforms to MSS SP-139 • NSF/ANSI-61-8 Commercial Hot 180°F (includes annex F and G) and NSF/ANSI-372 Size Range: 1/4" - 2" Pressure Rating: 200 PSI Non-Shock Cold Working Pressure Maximum Pressure / Temperature: 100 PSI at 300° F Lead-free marking: Double oval in body casting MATERIAL LIST PART SPECIFICATION 1. Hinge Pin 316SS or 304SS 2. Hinge Pin Plug Silicon Bronze ASTM B283 Alloy C69300 3. Bonnet Silicon Bronze ASTM B584 Alloy C87850 4. Nut (2) 316SS or 304SS 5. Disc Hanger Silicon Bronze ASTM B584 Alloy C87850 or MPIF SS-316NI-25 6. Seat Disc PTFE 7. Seat Disc Washer * 304SS or 316SS 8. Disc Holder Silicon Bronze ASTM B283 Alloy C69300 9. Body Silicon Bronze ASTM B584 Alloy C87850 * Sizes 3/4", 1", 11/4", 11/2" and 2" only. DezincificationResistant DIMENSIONS—WEIGHTS—QUANTITIES SIZE A B C D E F G T-413-Y-LF Master In.mm.In.mm.In.mm.In.mm.In.mm.In.mm.In.mm.In.mm.Lbs.Kg.Ctn Qty. 1/4 8 2.12 53.85 1.31 33.27 1.37 34.79 0.67 17 1.57 40 1.401 27 0.26 7 0.508 0.23 50 3/8 10 2.12 53.85 1.31 33.27 1.31 33.27 0.67 17 1.40 36 1.401 27 0.35 9 0.478 0.22 50 1/2 15 2.44 62 1.66 42 2.31 59 0.81 21 1.61 41 1.401 33 0.42 11 0.55 0.25 50 3/4 20 2.9 74 1.88 48 2.67 68 1.04 26 2.06 52 1.702 40 0.42 11 0.90 0.41 50 1 25 3.56 90 2.27 58 3.29 84 1.26 32 2.44 62 1.953 52 0.55 14 1.46 0.66 30 1-1/4 32 4.18 106 2.73 69 3.93 100 1.59 40 3.00 76 2.179 60 0.59 15 2.17 0.99 20 1-1/2 40 4.48 114 3.08 78 4.44 113 1.86 47 3.39 86 2.430 70 0.57 13 2.95 1.34 10 2 50 5.29 134 3.84 98 5.48 139 2.29 58 3.74 95 3.067 83 0.76 19 4.79 2.17 10 SIZE A B C D E F G S-413-Y-LF Master In.mm.In.mm.In.mm.In.mm.In.mm.In.mm.In.mm.In.mm.Lbs.Kg.Ctn Qty. 1/4 8 2.12 53.85 1.31 33.27 1.37 34.79 0.67 17 1.57 40 1.401 27 0.26 7 0.508 0.23 50 3/8 10 2.12 53.85 1.31 33.27 1.31 33.27 0.67 17 1.40 36 1.401 27 0.35 9 0.478 0.22 50 1/2 15 2.52 64 1.540 42 1.940 49 0.54 14 1.52 39 1.416 20 0.50 13 0.55 0.25 50 3/4 20 3.34 85 1.861 48 2.410 61 0.78 20 1.84 47 1.717 28 0.75 19 0.88 0.40 50 1 25 4.06 103 2.206 29 2.880 73 1.02 26 2.25 57 1.947 34 0.91 23 1.48 0.67 30 1-1/4 32 4.69 119 2.737 38 3.520 89 1.26 32 2.75 70 2.178 40 0.97 25 2.22 1.01 20 1-1/2 40 5.28 134 3.030 44 3.950 100 1.51 38 3.09 78 2.429 47 1.09 28 3.00 1.36 10 2 50 6.44 164 3.640 98 4.863 123 1.98 50 3.74 95 3.073 62 1.34 34 4.87 2.21 10 Do not use for reciprocating air compressor service. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Revised 8/30/2018