HomeMy WebLinkAbout22 0519 Meters and Gauges submittal REVIEWED AND APPROVEDSubmittal Transmittal
SUBMITTAL TRANSMITTAL
Project Name: Ithaca Arthaus
Project Number : 18260
A Transmittal (from SUBCONTRACTOR)
To:Vecino Construction, LLC Date Submitted 6/3/2020
Attn:Corey Olmstead Submittal No. (per Procore)
corey@vecinogroup.com x Submitted for Review & Approval REV (0)
Phone: (315) 854-0979
ReSubmitted for Review & Approval REV (1)
From:Woodcock & Armani
mike.meyer@comfortsystemsusa.com This is a FULL SUBMITTAL
315-701-2042
This is a PARTIAL Submittal
Item
No.
Dwg. And/or Specification
Section
SpecParagraph /
No.Title / Description Manufacturer Submittal Type Lead Time
1 22 0519 1.1.A.B Gauges and Thermemeters
2 22 0519 2.1A.2 Gauges Trerice
3 2.1.B.1.2.3
4 22 0519 2,2.A.1 Gauge Cock Trerice
5 22 0519 2.3.A.1 Thermometer Trerice
6
7
8
9
10
11
Comments:Vecino Construction Stamp BW A&E Stamp
Signature/Stamp of Transmitter Date
O P T I O N S & A C C E S S O R I E S
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com
64
735/740 Series Needle Valves are of the rising stem
type and are designed to shut off the flow of the process
media to the pressure instrument, thereby allowing the
instrument to be isolated from the pressure media or
removed from service. Needle valves may also be used
to throttle flow and aid in dampening pulsations. Trerice
Needle Valves are constructed from brass, carbon steel
and stainless steel for use on a variety of pressure media.
It is recommended to place a needle valve, ball
valve or gauge cock in line before every pressure
gauge installation.
735/740 Series Needle Valves
Item Connection Maximum Maximum Approximate
No. Type Size (NPT) Body Seat Stem Packing Pressure (psig) Temperature Shipping Weight
735-2 F X F 1/4 Brass* Brass Brass Teflon 2000 200°F 0.3 lbs [0.14 kg]
735-4 F X F 1/4 Carbon steel Teflon 316SS Teflon 4000 200°F 0.3 lbs [0.14 kg]
735-8 F X F 1/4 316SS 316SS 316SS Teflon 6000 200°F 0.3 lbs [0.14 kg]
735-9 M X F 1/4 316SS 316SS 316SS Teflon 6000 200°F 0.3 lbs [0.14 kg]
740-3 F X F 1/2 Carbon steel Carbon steel 316SS Teflon 10,000 200°F 1.0 lbs [0.45 kg]
740-4 M X F 1/2 Carbon steel Carbon steel 316SS Teflon 10,000 200°F 1.3 lbs [0.59 kg]
740-9 M X F 1/2 316SS Delrin 316SS Teflon 6000 200°F 1.3 lbs [0.59 kg]
740-11 F X F 1/2 316SS 316SS 316SS Teflon 10,000 200°F 1.0 lbs [0.45 kg
* Add (PBF) to the end of part number to specify Lead-Free brass.
735-2 735-8 735-9 735-4 740-3 740-4 740-11 740-9
All dimensions are nominal. Dimensions in [ ] are in millimeters.
735/740 Series
Needle Valves
0.75[19]
1/4-18 NPtfeMaleBotH eNDs
1.61 [41]B (CloseD)NPt - Male NPt - feMale
e (HaNDle swINg DIaMeter)
0.38 [10]
2.10 [53]CloseD
Ø.0.97 [25]
B (CloseD)NPt - feMaleBotH eNDs
e (HaNDle swINg DIaMeter)
PART NO. 735-2
Part No. A B C D E NPT
735-4
735-8 2.29 [58] 2.39 [61] 0.75 [19] 0.38 [10] 1.87 [47] 1/4 - 18
740-3
740-11 2.96 [75] 2.83 [72] 1.13 [29] 0.56 [14] 2.29 [58] 1/2 - 14
Part No. A B C D E NPT
735-9 2.29 [58] 2.39 [61] 0.75 [19] 0.38 [10] 1.87 [47] 1/4 - 18
740-4
740-9 3.23 [82] 2.83 [72] 1.13 [29] 0.56 [14] 2.29 [58] 1/2 - 14
aaC C
D D
22 0519 Meters and Gauges
2.2A.1
The Trerice 800B Utility Gauge
is designed for general pressure
indication requirements. This gauge
provides reliable service at an
economical cost. Wetted parts are
bronze tube and Lead-Free (PBF)
brass socket.
800B
Dry •Black Finished Steel Case
Model
800B
Dial Sizes 11/2", 2", 21/2", 4"
Wetted Parts Bronze tube, brass socket Lead-Free (PBF) Meets NSF/ANSI Standards 372 and 61
Movement Brass
Connection 11/2" Dial Size: Lower male or center back male, 1/8 NPT
2", 21/2" Dial Size: Lower male or center back male, 1/8 or 1/4 NPT
4" Dial Size: Lower male or center back male, 1/4 NPT
Case Drawn steel, black finished, stem-mounted flangeless
Window Acrylic
Pointer Plain, black finished
Dial Face Aluminum, white background with black graduations and markings
Accuracy ±1.6% Full Scale
Maximum Temperature
180°F (82°C)
Approximate Shipping Weight
11/2” Dial Size: 0.2 lbs [0.09 kg]
2” Dial Size: 0.3 lbs [0.14 kg]
21/2” Dial Size: 0.3 lbs [0.14 kg]
4” Dial Size: 0.6 lbs [0.27 kg]
Specifications
U T I L I T Y G A U G E S
800B shown
11/2", 2", 21/2", 4" Dial Sizes
±1.6% Accuracy
Drawn Steel Case
HOW TO ORDER Sample Order Number: 800B 15 01 B D 110
Model Dial Size Connection Connection Units of Range Code Size Location Measure
800B 15 11/2" 01 1/8 NPT L Lower A psi See Standard
20 2" 02 1/4 NPT B Back D psi/kPa Ranges
25 21/2"
40 4"
• Optional features and case
style variations available: Please consult the Options & Accessories Section for details.
• For correct use and application of all pressuregauges, please refer to:Pressure Gauge Standard
ASME B40.100.
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com
26
22 0519 Meters and Gauges
1.1A
2.1A2 2.1B1.2.3
U T I L I T Y G A U G E S
800B
Dry •Black Finished Steel CaseAll dimensions are nominal. Dimensions in [ ] are in millimeters.
Dial Size C E F H J R
11/2" Lower 1.57 [40] 1.54 [39] 0.35 [9] 0.71 [18] 1.02 [26] 0.43 [11]
11/2" Back 1.57 [40] 1.54 [39] 0.35 [9] 0.68 [17] 1.15 [29] 0.43 [11]
2" 1.97 [50] 1.93 [49] 0.39 [10] 0.89 [23] 1.16 [29] 0.55 [14]
21/2" 2.48 [63] 2.20 [56] 0.39 [10] 0.87 [22] 1.16 [29] 0.55 [14]
4" 3.94 [100] 2.87 [73] 0.39 [10] 0.95 [24] 1.38 [35] 0.55 [14]
Standard Ranges
psi Ranges (A) psi/kPa Ranges (D)
psi kPa
Range Specific Figure Minor Range Specific Figure Minor Figure Minor
Code Range Intervals Divisions Code Range Intervals Divisions Intervals Divisions
010 30" Hg to 0 5 0.5 010 30" Hg to 0 / –100 to 0 kPa 5 0.5 10 2
020 30" Hg to 15 psi 10/5 1/0.5 020 30" Hg to 15 psi / –100 to 100 kPa 10/5 1/0.5 20/20 2/2
030 30" Hg to 30 psi 10/5 1/1 030 30" Hg to 30 psi / –100 to 200 kPa 10/5 1/1 50/50 5/5
040 30" Hg to 60 psi 10/10 2/1 040 30" Hg to 60 psi / –100 to 400 kPa 10/10 2/1 100/100 10/10
050 30" Hg to 100 psi 30/20 2/2 050 30" Hg to 100 psi / –100 to 700 kPa 30/20 2/2 100/100 10/10
060 30" Hg to 150 psi 30/30 5/2 060 30" Hg to 150 psi / –100 to 1000 kPa 30/30 5/2 100/100 10/10
070 30" Hg to 300 psi 30/50 5/5 070 30" Hg to 300 psi / –100 to 2000 kPa 30/50 5/5 100/200 20/20
080 0 to 15 psi 3 0.2 080 0 to 15 psi / 0 to 100 kPa 3 0.2 10 1
090 0 to 30 psi 5 0.5 090 0 to 30 psi / 0 to 200 kPa 5 0.5 20 2
100 0 to 60 psi 10 1 100 0 to 60 psi / 0 to 400 kPa 10 1 50 5
110 0 to 100 psi 10 1 110 0 to 100 psi / 0 to 700 kPa 10 1 100 10
120 0 to 160 psi 20 2 120 0 to 160 psi / 0 to 1100 kPa 20 2 200 10
130 0 to 200 psi 20 2 130 0 to 200 psi / 0 to 1400 kPa 20 2 200 20
140 0 to 300 psi 50 5 140 0 to 300 psi / 0 to 2000 kPa 50 5 200 20
150 0 to 400 psi 50 5 150 0 to 400 psi / 0 to 2800 kPa 50 10 400 20
160 0 to 600 psi 100 10 160 0 to 600 psi / 0 to 4000 kPa 100 20 500 50
180 0 to 1000 psi 100 20 180 0 to 1000 psi / 0 to 7000 kPa 100 20 1000 100
190 0 to 1500 psi 300 20 190 0 to 1500 psi / 0 to 10,000 kPa 300 20 1000 200
200 0 to 2000 psi 200 20 200 0 to 2000 psi / 0 to 14,000 kPa 200 50 2000 200
210 0 to 3000 psi 500 50 210 0 to 3000 psi / 0 to 20,000 kPa 500 100 2000 200
220 0 to 5000 psi 1000 100 220 0 to 5000 psi / 0 to 35,000 kPa 1000 100 5000 500
27
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com
HOW TO ORDER Sample Order Number: BX9 1 403 07
Model Stem (Material) Stem (Length) Specific Range
AX9 7" Adjustable 1 Aluminum (standard) 403 31/2" See Standard
BX9 9" Adjustable 2 Brass 406 6" Ranges
CX9 12" Adjustable 3 304 SS 408 8"
512 12"
006 6" Air-Duct
012 12" Air-Duct
* Not for use with Thermowells
Recognized globally as the
Trerice “BX”Industrial
Thermometer, this is an
instrument of extreme
accuracy and rugged
dependability. Available
in scale sizes of 7" (AX9),
9" (BX9), & 12" (CX9), with
a durable cast aluminum case,
this universally adjustable,
liquid-in-glass thermometer is
the most widely specified
instrument of its kind.
BX91403 shown
Adjustable Angle
7"•9"• 12"Scale Sizes
Models Scale Sizes
AX9 7"
BX9 9"
CX9 12"
Fill Type Spirit: Blue colored, organic
Case Cast Aluminum, blue epoxy finish
Stem Aluminum, brass, 304 stainless steel or air-duct style available
Connection Standard:11/4-18 UNEF-2A coupling nut
Air-Duct:Reversible mounting flange with 3 bolt holes
Window Ultraviolet protective acrylic on ranges to 300° F Glass on ranges over 300° F
Tube Lens front, magnifying type
Scale Aluminum, white background with black graduations and markings
Top Plate ABS
Accuracy ±1 scale division
Approximate Shipping Weight
AX9: 1.5 lbs [0.68 kg] BX9: 1.6 lbs [0.73 kg] CX9: 2.0 lbs [0.91 kg]
Specifications
INDUSTRIAL THERMOMETERS• Optional features available:
Please consult the Options
& Accessories Section for details.
Thermowell
• For applications where the
process media may be corrosive
or contained under pressure,
the use of a thermowell is required
to prevent damage to the
thermometer and facilitate
its removal from the process.
(Refer to page 158)
7", 9", 12" Scale
± 1 Scale Division Accuracy
Cast Aluminum Case
Adjustable Angle Stem
Adjustable Angle
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com
96
9 Air-Duct (Aluminum)*
22 0519
Meters and Gauges
2.3 A.1
Standard Ranges
Fahrenheit Scale Celsius Scale Dual Scale Fahrenheit Celsius
Range Range Range Figure Minor Figure Minor
Code Range Code Range Code Range Intervals Divisions Intervals Divisions
01 –40° to 110°F 17 –40° to 40°C 41 –40° to 110°F & –40° to 40°C 10° 2° 5° 1°
02 0° to 100°F 24 –18° to 38°C 42 0° to 100°F & –18° to 38°C 5° 1° 5° 0.5°
03 30° to 130°F 25 0° to 55°C 43 30° to 130°F & 0° to 55°C 5° 1° 5° 1°
04 0° to 160°F 26 –18° to 70°C 44 0° to 160°F & –18° to 70°C 10° 2° 5° 1°
06 30° to 180°F 27 0° to 83°C 46 30° to 180°F & 0° to 83°C 10° 2° 5° 1°
07 30° to 240°F 19 0° to 115°C 47 30° to 240°F & 0° to 115°C 10° 2° 5° 1°
08 30° to 300°F 20 0° to 150°C 48 30° to 300°F & 0° to 150°C 10° 2° 10° 2°
09 50° to 400°F 28 10° to 205°C 49 50° to 400°F & 10° to 205°C 25° 5° 10° 2°
15 50° to 500°F 31 10° to 260°C 55 50° to 500°F & 10° to 260°C 25° 5° 10° 2°
Adjustable Angle
INDUSTRIAL THERMOMETERSAll dimensions are nominal. Dimensions in [ ] are in millimeters.
.87 [22]
1.25 [32]
HEX
2.27 [58]
90 ° STEM
A
D J U S T MENT
90°
ST
E
M
A
DJ
U
S
TM
E
N
T
1.72 [44]
AIR-DUCT STEM
MOUNTING DIMENSIONS
Ø.25 - 3 HOLES
EQUALLY
SPACEDØ2.50
[Ø64]
Ø1.50
[Ø38]
AIR-DUCT STEM
.88 [22]
.69 [18]
2.27 [58]
.63 [16]
A
A
AX = 9.69 [246]
BX = 11.69 [297]
CX = 14.69 [373]
(A) Stem Length Dimension
31/2" 3.50 [88.9]
6" 6.00 [152.4]
8" 8.00 [203.2]
12" 12.00 [304.8]
Dual scale figure intervals may differ
97
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com
0.44 [11]
Thermowells
for Bimetal Thermometers & Temperature Sensors
Threaded-Stepped Shank
T H E R M O W E L L S
?PPTIRKSQORJQOTNLSTQJKRQNPD6RKSQORJQOTRQT;T :TNLSTRQTKRPPRKSMSLO
Alternative materials and accessories are also available. Please consult the Options and Accessories Section for details.
Selection of the proper thermowell is the sole responsibility of the user. Temperature and pressure limitations must be considered.
Improper application may cause failure of the thermowell, resulting in possible personal injury or property damage. For correct use and
application, please refer to the Thermowells For Thermometers and Electrical Temperature Sensors Standard ASME B40.9.
Standard (9 – 24” )
with Lagging Extension
HOW TO ORDER 2<84:AB1@7A@B-580A@/BBB 76-4 J 6
Thermowell Style (P) External Thread (A) Stem Length (T) Lagging Extension Material
76 -Bimetal/Sensor 3 1/2 NPT**D 21/2" Stem A 1" Extension (4" Stem only)2 Brass†
Stepped shank* 4 3/4 NPT G 4" Stem C 2" Extension (6" Stem only)4 Monel
5 1 NPT**J 6" Stem E 3" Extension (9" and longer Stem only)5 304SS
M 9" Stem Omit if None 6 316SS
R 12" Stem
V 15" Stem
Wa 18" Stem
Wk 24" Stem
(A)
STEM LENGTH
(P)
EXTERNAL
THREAD
U
LENGTH
1/2 NPSM
.40
[10]
.61
[15]
Ø.260
[7]
Ø.44
[11]
Standard (21/2” – 6” )
(A)
STEM LENGTH
(P)
EXTERNAL THREAD1/2 NPSM
1.00
[25]
.75
[19]
Ø.260
[7]
Ø.50
[13]
(T)
LAGGING
EXTENSION
U
LENGTH.75
[19]
Lengths
Standard with Lagging Extension
(A) Stem Length U Length (T) U Length
21/2" 1.75 [44] – –
4" 2.50 [64] 0.60 [15] 1.90 [48]
6" 4.50 [114] 2.00 [51] 2.50 [64]
9" 7.50 [191] 3.00 [76] 4.50 [114]
12" 10.50 [267] 3.00 [76] 7.50 [191]
15" 13.50 [343] 3.00 [76] 10.50 [267]
18" 16.50 [419] 3.00 [76] 13.50 [343]
24" 22.50 [572] 3.00 [76] 19.50 [495]
Pressure Rating (psi)
Operating Temperature
Material 70°F 200°F 400°F 600°F 800°F 1000°F
304 stainless steel 6550 6000 4860 4140 3510 3130
316 stainless steel 6540 6400 6000 5270 5180 4660
Monel 5530 4990 4660 4450 4450 -
Brass/PBF Brass 3170 psi @ 150˚F, 2930 psi @ 350˚F
&,% % ,
, ,!*) ,!*+'"#*,!#+$
&&, *,++'(+(),'*#,% % ,!*) ,()$"*#
(P)
EXTERNAL THREAD
(A)
STEM LENGTH Ø.260
[7]
Ø.50
[13]
1.00
[25]
1/2 NPSM
U
LENGTH
155
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com
† Add (PBF) to end of part number to specify Lead-free brass
T H E R M O W E L L S
Alternative materials and accessories are also available. Please consult the Options and Accessories Section for details.
Selection of the proper thermowell is the sole responsibility of the user. Temperature and pressure limitations must be considered.
Improper application may cause failure of the thermowell, resulting in possible personal injury or property damage. For correct use and
application, please refer to the Thermowells For Thermometers and Electrical Temperature Sensors Standard ASME B40.9.
Standard
with Lagging Extension
Lengths
HOW TO ORDER 2<84:AB1@7A@B-580A@/BBB 90-4 G 4
Thermowell Style (P) External Thread (A) Stem Length (T) Lagging Extension Material
90-Bimetal/Sensor 4 3/4 NPT G 4" Stem C 2" Extension (6" Stem only)2 Brass
Tapered Shank 5 1 NPT J 6" Stem E 3" Extension (9" and longer Stem only)3 Steel
M 9" Stem Omit if None 4 Monel
R 12" Stem 5 304SS
V 15" Stem 6 316SS
Wa 18" Stem
Wk 24" Stem
Standard with Lagging Extension
(A) Stem Length U Length (T) U Length
4" 2.50 [64] – –
6" 4.50 [114] 2.00 [51] 2.50 [64]
9" 7.50 [191] 3.00 [76] 4.50 [114]
12" 10.50 [267] 3.00 [76] 7.50 [191]
15" 13.50 [343] 3.00 [76] 10.50 [267]
18" 16.50 [419] 3.00 [76] 13.50 [343]
24" 22.50 [572] 3.00 [76] 19.50 [495]
?PPTIRKSQORJQOTNLSTQJKRQNPD6RKSQORJQOTRQT;T :TNLSTRQTKRPPRKSMSLO
.75
[19]
1/2 NPSM
Ø.260
[7]
.75 [19]WRENCH
ALLOWANCE 1.00
[25]
1/2 NPSM
Ø.260
[7]
Pressure Rating (psi)
Operating Temperature
Material 70°F 200°F 400°F 600°F 800°F 1000°F
Carbon steel 5950 5750 5450 5250 4000 -
304 stainless steel 7800 7050 6300 5360 4350 4100
316 stainless steel 7800 7800 7250 7100 6700 5800
Monel 7170 6670 6040 5770 5770 -
Brass 4140 psi @ 150˚F, 3790 psi @ 350˚F
Thermowells
for Bimetal Thermometers & Temperature Sensors
Heavy Duty • Tapered Shank for High Pressure Applica tions
Ø.62
[16]
(A)
STEM LENGTH
(T)
LAGGING
EXTENSION
(P)
EXTERNAL THREAD
1.00
[25]
U
LENGTH
(A)
STEM LENGTH
(P)
EXTERNAL THREAD
Ø.62
[16]U
LENGTH
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com
156
Thermowells
for Bimetal Thermometers &Temperature Sensors
Socket-Weld Style • Stepped or Heavy Duty Tapered Shank
T H E R M O W E L L S
?PPTIRKSQORJQOTNLSTQJKRQNPD6RKSQORJQOTRQT;T :TNLSTRQTKRPPRKSMSLOD
Alternative materials and accessories are also available. Please consult the Options and Accessories Section for details.
Selection of the proper thermowell is the sole responsibility of the user. Temperature and pressure limitations must be considered.
Improper application may cause failure of the thermowell, resulting in possible personal injury or property damage. For correct use and
application, please refer to the Thermowells For Thermometers and Electrical Temperature Sensors Standard ASME B40.9.
Stepped Shank
HOW TO ORDER 2<84:AB1@7A@B-580A@/BBB 90-S5 M 6
Thermowell Style (P) Nominal Pipe Size (A) Stem Length Material
76-Bimetal/Sensor S4 3/4"G 4" Stem 3 Steel
Stepped Shank S5 1"J 6" Stem 5 304SS
M 9" Stem 6 316SS
90-Bimetal/Sensor R 12" Stem
Tapered Shank V 15" Stem
Wa 18" Stem
Wk 24" Stem
Lengths
(A) Stem Length U Length
4" 2.50 [64]
6" 4.50 [114]
9" 7.50 [191]
12" 10.50 [267]
15" 13.50 [343]
18" 16.50 [419]
24" 22.50 [572]
Pressure Rating (psi)
Operating Temperature
Material 70°F 200°F 400°F 600°F 800°F 1000°F
Stepped Carbon Steel 5200 5000 4800 4600 3500 -
Shank 304 Stainless Steel 6550 6000 4860 4140 3510 3130
316 Stainless Steel 6540 6 400 6000 5270 5180 4660
Tapered Carbon Steel 5950 5750 5450 5250 4000 -
Shank 304 Stainless Steel 7800 7050 6300 5360 4350 4100
316 Stainless Steel 7800 7800 7250 7100 6700 5800
1/2 NPSM Ø.260
[7]
Ø.50
[13]
U
LENGTH
(A)
STEM LENGTH
(P)PIPE SIZE
1/2 NPSM Ø.260
[7]
Ø.63
[16]U
LENGTH
(A)
STEM LENGTH
(P)
PIPE SIZE
Tapere d Shank
Other Dimensions
Nominal Actual
Pipe Size (P) Diameter
3/4" 1.050 [23.67]
1" 1.315 [33.40]
157
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com
Note: Trerice Socket-Weld Thermowells are furnished standard with Schedule 10. For other wall thicknesses, Please consult factory.
Thermowells
for Bimetal Thermometers & Temperature Sensors
Weld-In Style
T H E R M O W E L L S
Alternative materials and accessories are also available. Please consult the Options and Accessories Section for details.
Selection of the proper thermowell is the sole responsibility of the user. Temperature and pressure limitations must be considered. Improper
application may cause failure of the thermowell, resulting in possible personal injury or property damage. For correct use and application,
please refer to the Thermowells For Thermometers and Electrical Temperature Sensors Standard ASME B40.9.
?PPTIRKSQORJQOTNLSTQJKRQNPDTT6RKSQORJQOTRQT;T :TNLSTRQTKRPPRKSMSLO
1/2 NPSM
1.50
38]
Ø.260
[7]
Ø.63
[16]
U
LENGTH
(A)
STEM LENGTH
Lengths
(A) Stem Length U Length
4" 2.50 [64]
6" 4.50 [114]
9" 7.50 [191]
12" 10.50 [267]
15" 13.50 [343]
18" 16.50 [419]
24" 22.50 [572]
Pressure Rating(psi)
Operating Temperature
Material 70°F 200°F 400°F 600°F 800°F 1000°F
Carbon steel 5950 5750 5450 5250 4000 -
304 stainless steel 7800 7050 6300 5360 4350 4100
316 stainless steel 7800 7800 7250 7100 6700 5800
HOW TO ORDER 2<84:AB1@7A@B-580A@/BBB 90-W7 V 6
Thermowell Style Connection (A) Stem Length Material
90 -Bimetal/Sensor W7 11/2"G 4" Stem 3 Steel
Tapered Shank J 6" Stem 5 304SS
M 9" Stem 6 316SS
R 12" Stem
V 15" Stem
Wa 18" Stem
Wk 24" Stem
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com
158
Tapered Shank
Thermowells
for Bimetal Thermometers & Temperature Sensors
Flanged Style • Straight or Heavy Duty Tapered Shank
T H E R M O W E L L S
?PPTIRKSQORJQOTNLSTQJKRQNPD6RKSQORJQOTRQT;T :TNLSTRQTKRPPRKSMSLOD
Alternative materials and accessories are also available. Please consult the Options and Accessories Section for details.
Selection of the proper thermowell is the sole responsibility of the user. Temperature and pressure limitations must be considered.
Improper application may cause failure of the thermowell, resulting in possible personal injury or property damage. For correct use and
application, please refer to the Thermowells For Thermometers and Electrical Temperature Sensors Standard ASME B40.9.
Straight Shank
Lengths
(A) Stem Length U Length
4" 2.00 [51]
6" 4.00 [102]
9" 7.00 [178]
12" 10.00 [254]
15" 13.00 [330]
18" 16.00 [406]
24" 22.00 [559]
Pressure Rating
Maximum pressure and temperature ratings are limited by the choice of
flange. Please see ANSI/ASME B16.5-2003 for more information.
1/2 NPSM
FLANGE SIZE AND
RATING
AS REQUIRED
Ø.260
[7]
Ø.75
[19]
U
LENGTH
(A)
STEM LENGTH
WELD
WELD 1/2 NPSM
FLANGE SIZE AND
RATINGAS REQUIRED Ø.260
[7]
Ø.62
[16]
U
LENGTH
WELD
WELD
(A)
STEM LENGTH
Tapered Shank
Thermowell Style Flange Size and Rating (A) Stem Length Material
78 -Bimetal/Sensor 51 1"G 4" Stem 3 Steel
Straight Shank 71 11/2" 150# RFF J 6" Stem 4 Monel
81 2"M 9" Stem 5 304SS
90 -Bimetal/Sensor 181 3"R 12" Stem 6 316SS
Tapered Shank V 15" Stem
53 1"Wa 18" Stem
73 11/2" 300# RFF Wk 24" Stem
83 2"
183 3"
56 1"
76 11/2" 600# RFF
86 2"
186 3"
HOW TO ORDER 2<84:AB1@7A@B-580A@/BBB 78-81 J 6
Other Flange Sizes and Ratings
available; consult factory.
159
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com
Thermowells
for Bimetal Thermometers & Temperature Sensors
Van Stone Style
T H E R M O W E L L S
Alternative materials and accessories are also available. Please consult the Options and Accessories Section for details.
Selection of the proper thermowell is the sole responsibility of the user. Temperature and pressure limitations must be considered.
Improper application may cause failure of the thermowell, resulting in possible personal injury or property damage. For correct use and
application, please refer to the Thermowells For Thermometers and Electrical Temperature Sensors Standard ASME B40.9.
Straight Shank
HOW TO ORDER 2<84:AB1@7A@B-580A@/BBB 78-V7 R 6
Thermowell Style (P) Nominal Pipe Size (A) Stem Length Material
78 -Bimetal/Sensor V5 1"G 4" Stem 3 Steel
Straight Shank V7 11/2"J 6" Stem 4 Monel
M 9" Stem 5 304SS
R 12" Stem 6 316SS
V 15" Stem
Wa 18" Stem
Wk 24" Stem
?PPTIRKSQORJQOTNLSTQJKRQNPDTT6RKSQORJQOTRQT;T :TNLSTRQTKRPPRKSMSLODD
1/2 NPSM
(P)
DIA.
Ø.260
[7]
Ø.75
[15]
U
LENGTH
(A)
STEM LENGTH
(R)
RAISED
FACE DIA.
Thermowell does not include
backing flange; when required,
a carbon steel backing flange
can be supplied. Consult factory.
Other Dimensions
Nominal Actual Raised Face
Pipe Size (P) Diameter (R) Diameter
1"1.32 [33] 2.00 [51]
11/2"1.90 [48] 2.88 [73]
Lengths
(A) Stem Length U Length
4" 2.00 [51]
6" 4.00 [102]
9" 7.00 [178]
12" 10.00 [254]
15" 13.00 [330]
18" 16.00 [406]
24" 22.00 [559]
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com
160
Pressure Rating
Maximum pressure and temperature ratings are limited by the choice of
flange. Please see ANSI/ASME B16.5-2003 for more information.
Thermowells
for Bimetal Thermometers & Temperature Sensors
Sanitary Style
T H E R M O W E L L S
?PPTIRKSQORJQOTNLSTQJKRQNPDT6RKSQORJQOTRQT;T :TNLSTRQTKRPPRKSMSLOD
Alternative materials and accessories are also available. Please consult the Options and Accessories Section for details.
Selection of the proper thermowell is the sole responsibility of the user. Temperature and pressure limitations must be considered.
Improper application may cause failure of the thermowell, resulting in possible personal injury or property damage. For correct use and
application, please refer to the Thermowells For Thermometers and Electrical Temperature Sensors Standard ASME B40.9.
Stepped
Lengths
(A) Stem Length U Length
4" 2.50 [64]
6" 4.50 [114]
9" 7.50 [191]
12" 10.50 [267]
15" 13.50 [343]
18" 16.50 [419]
24" 22.50 [572]
Thermowell Style End Cap Size (A) Stem Length Material
76 -Bimetal/Sensor T7 11/2"G 4" Stem 5 304SS
Stepped Shank T8 2"J 6" Stem 6 316SS
T18 3"M 9" Stem
R 12" Stem
V 15" Stem
Wa 18" Stem
Wk 24" Stem
HOW TO ORDER 2<84:AB1@7A@B-580A@/BBB 76-T8 M 6
1/2 NPSM
U
LENGTH
Ø.260
[7]
Ø.50
[13]
(A)
STEM LENGTH
FINISH: 16-20 RA
ROUGHNESS AVERAGE 240 GRIT
WELD
WELD
END CAPSIZE AS REQUIRED
Designed to meet 3A Dairy Certification
requirements.
Pressure ratings are dependent upon
the clamps, gaskets and ferrules used,
which are not supplied by Trerice.
161
12950 W. Eight Mile Road •Oak Park, MI 48237-3288 •TEL:248/399-8000 •FAX: 248/399-7246 •www.TRERICE.com