Loading...
HomeMy WebLinkAbout262410-002 Electrical Gearusa.siemens.com/powerdistribution Cayuga Flats - 209 Elm Street Siemens Submittal Package Date: 10/9/2020 To: Job Name: Quote Name: Cayuga Flats - 209 Elm Street Cayuga Flats - 209 Elm Street Quote Number: Distributor: millbx02c_09292000_00_00_M00 V P SUPPLY CORP SCHULER-HAAS ELECTRIC CORPContractor: Drawings are for:Approval Record Please find enclosed 1 Copy of the below listed materials for the above referenced job. Contents: Multi-Family Metering Upon the return of 1 Copy of “Approved “ or “No Exceptions Noted” drawings with release, it will be considered fact that the material as shown meets the requirements of the plans and specifications. For drawings returned indicating “Approved as Noted” or “Exceptions as Noted”, the cost of any additional equipment not included in the original quotation will be reflected in the total invoice price. Any changes other than those shown on these returned drawings will not be considered the responsibility of Siemens. It must be noted that these drawings and descriptive literature incorporate Siemens’ interpretation of the plans and specifications and are subject to corrections of errors. The above material is on “Hold for Release” status and will not be released until the receipt of signed submittals having one of the above notations with formal release. These drawings along with release should be returned as soon as possible so as not to cause any delays in shipping and/or escalation that might be incurred due to these delays. Approval Drawings: These drawings reflect the products manufactured by Siemens for this job. Record Drawings: Submitted By: Chad Beck VP Supply 232 Vestal Parkway 6073490131 cbeck@vpsupply.com Phone: E Mail: Fax: 10/9/2020Date:TRANSMITTAL LETTER Job Name: Quote #: Cayuga Flats - 209 Elm Street Cayuga Flats - 209 Elm Street millbx02c_09292000_00_00_M00 Quote Name: Bid Date:10/01/2020 Siemens Industry, Inc. (Company) agrees to sell to Purchaser and Purchaser agrees to purchase from the Company the goods described below. Written quotations are valid for 30 calendar days from price approval date unless otherwise stated in the quotation. Quotations are subject to change by Siemens Industry, Inc. at any time upon written notice to Purchaser. Quoted Lead times refer to the manufacturing cycles, in working days, at time of quotations and are subject to change. Line #:Qty Description To:From:VP Supply Chad Beck 232 Vestal Parkway 6073490131 cbeck@vpsupply.com Attention: Tel. No.: US Vestal, 13732 Quote Notes: 20000 1 400A E.S.E.--400A E.S.E. 1 BREAKER:WEB3400B- POWMOD WEB 400A 3PH 3R 65K AIC1- 1 LUG KITS:LK31750N2- POWMOD LUG KT 3PH 1COND 750KCM HOLE1- 1 RESI STACK:WMM52125RJB- POWMOD WMM 125A 5G 3PH IN 1PH OUT RL HB1- 5 TENANT BREAKER:Q2100H(5)- BREAKER 100A 2P 120/240V 22KA QPH1- 1 RESI STACK:WMM52125RJB- POWMOD WMM 125A 5G 3PH IN 1PH OUT RL HB1- 5 TENANT BREAKER:Q2100H(5)- BREAKER 100A 2P 120/240V 22KA QPH1- 1 RESI STACK:WMM52125RJB- POWMOD WMM 125A 5G 3PH IN 1PH OUT RL HB1- 5 TENANT BREAKER:Q2100H(5)- BREAKER 100A 2P 120/240V 22KA QPH1- 1 LEVER BYPASS:WML13225RJ- POWMOD WML 1G 7J 3PH I/O 225A1- 1 TENANT BREAKER:US2:QRH23B200(1)- BREAKER QR 3P 200A 240V 25KA1- Global Notes: Proposal 10/9/2020millbx02c_09292000_00_00_M00 1 Proposal Small Order Handling: Warranty: Purchase orders below $400 will incur a $25 Small Order Handling (SOH) Fee. Warranty shall be in effect for a period of (1) year from initial operation of the goods but not more than eighteen (18) months from Siemens, shipment of the goods, unless stated otherwise. Price Policy: Payment: Shipping: Delivery: Other: Freight: Standard quote is valid for 30 days from price approval date. Per Siemens distributor's terms. Shipment of goods will be made after receipt of all the following at Company's production facility: (a) Purchase Order / Electronic PO, (b) Technical Information, and if required (c) Drawing Approval. FOB Shipping Point, unless stated otherwise. This proposal is subject to credit approval and US government regulation. It is also based on the Company's interpretation of the plans and specifications and is subject to correction for errors in such plans or specifications. This document and any other documents specifically referred to as being a part hereof constitute the entire agreement on the subject matter and it shall not be modified except in writing signed by both parties. THIS PROPOSAL IS BASED UPON SIEMENS STANDARD TERMS AND CONDITIONS OF SALE ATTACHED HERETO AND INCLUDED HEREIN. Company hereby objects to any additional or different terms set forth in Purchaser's request for proposal, specifications, purchase order, or any other document of Purchaser. Acceptance of additional or different terms must be specifically assented to in writing by Company. Federal Projects (This applies to Federal and Federally Funded Projects only): Siemens represents that it is providing "commercial items" and services for sale within the definition of FAR 2.101. In keeping with its commercial market participation, Siemens is categorically exempt from any Cost & Pricing Data requirements. Siemens utilizes a commercial accounting system under International Financial Reporting Standards (IFRS); and is technically unable to comply with Federal Cost Accounting Standards & Certification and any FAR 31 requirements. Siemens Industry, Inc. is a Foreign Owned, Controlled, or Influenced ("FOCI") firm, under the definition contained in the National Industrial Security Program Operational Manual ("NISPOM") and cannot obtain a security clearance, or perform work requiring its compliance with the FAR 52.204-2 "Security Requirements." Siemens does not anticipate receiving or having any access to any USG Controlled Unclassified Information (CUI) or Covered Defense Information (CDI) in the performance of this contract. However, in the event that any CUI/CDI will be required by Siemens in the performance of this contract, contractor/customer agrees to formally notify Siemens of its intent to transmit or provide CUI/CDI prior to the transmittal of any such information. In that event, Siemens will provide a plan in order to compliantly address the requirements of FAR 52.204-21, DFARS 252.204-7008, 252.204-009 and/or 252.204-7012. Siemens shall not be held responsible for determining, or providing, its compliance with any federal requirements including, but not limited to any Buy America/Buy American requirements, unless the contractor/customer has provided the SPECIFIC federal flow-down provisions to Siemens, and received Siemens affirmation of compliance with the same prior to issuance of any Purchase Order or Contract. Freight allowed on all orders over $1,000 and shipped within the contiguous United States, provided Seller selects the Route Option: BESTRT -Best Route. Important Update: As a result of the global Covid-19 Virus outbreak, temporary delays in delivery, labor or services from Siemens and its sub-suppliers or subcontractors may occur. Among other factors, Siemens’ delivery is subject to the correct and punctual supply from sub-suppliers or subcontractors, and Siemens reserves the right to make partial deliveries or modify its labor or services. While Siemens shall make every commercially reasonable effort to meet the delivery or service or completion date mentioned above, such date is subject to change Cancellation Schedule: In the event that Buyer cancels the purchase order, or portions of the purchase order in writing, the following charges, as a percentage of the total purchase order price for the order, or application portions thereof, will apply: After receipt of order or before approval drawings are completed----------------------15% After approval drawing completion, but before release to manufacturing-------------30% Before start of fabrication, but after major component purchase------------------------60% After start of fabrication, but before start of assembly--------------------------------------80% After assembly has started------------------------------------------------------------------------100% 10/9/2020millbx02c_09292000_00_00_M00 2 52.204-21, DFARS 252.204-7008, 252.204-009 and/or 252.204-7012. Siemens shall not be held responsible for determining, or providing, its compliance with any federal requirements including, but not limited to any Buy America/Buy American requirements, unless the contractor/customer has provided the SPECIFIC federal flow-down provisions to Siemens, and received Siemens affirmation of compliance with the same prior to issuance of any Purchase Order or Contract. Proposal 10/9/2020millbx02c_09292000_00_00_M00 3 Proposal SIEMENS STANDARD TERMS AND CONDITIONS OF SALE FOR PRODUCTS Version1.1/Restricted Date: 07/01/2016 1.APPLICABLE TERMS. This Agreement governs the sale of equipment, components, parts, and materials provided by Siemens (“Products”). Any applicable addenda, these terms, Siemens proposal, price quote, purchase order, or acknowledgement issued by Siemens form the parties’ final agreement (“Agreement”). In the event of a conflict between these documents, precedence shall apply in accordance with the order listed in the previous sentence. Siemens’ proposal, offer or acceptance is conditioned on Buyer's acceptance of this Agreement. Any additional or conflicting terms in Buyer's request for proposal, specifications, purchase order or any other written or oral communication are not binding on Siemens unless separately signed by Siemens. Siemens’ failure to object to Buyer’s additional or conflicting terms does not operate as a waiver of any terms contained in this Agreement. 2.PRICING & PAYMENT. Prices and payment terms are: (i) as stated in Siemens’ proposal, or if none are stated; (ii) Siemens' standard prices in effect when Siemens receives Buyer’s purchase order; or if neither (i) or (ii) apply, then Siemens’ standard prices in effect when the Products ship. (a)Payment. Unless stated in Siemens’ proposal, all payments are due net thirty (30) days from the invoice date in United States Dollars. (b)Credit Approval. All orders are subject to credit approval by Siemens. Siemens may modify, suspend or withdraw the credit amount or payment terms at any time. If there is doubt as to Buyer’s financial condition, Siemens may withhold manufacturing or shipment, require cash payments, or require other satisfactory security. Siemens may recover shipped Products from the carrier pending such assurances. (c)Installment Shipment. Where Products are delivered in shipments or only part of a shipment fails to comply with this Agreement, the Buyer may only reject the non-compliant portion. Buyer will separately pay for each shipment. If Siemens holds or stores Products for Buyer, it shall do so at Buyer's sole risk and expense. (d)Taxes, Shipping, Packing, Handling. Unless stated in writing by Siemens, Siemens’ prices exclude charges for freight, unloading, storage, insurance, taxes, excises, fees, duties or other government charges related to the Products. Buyer will pay these amounts or reimburse Siemens. If Buyer claims a tax or other exemption or direct payment permit, Buyer will provide a valid exemption certificate or permit and indemnify, defend and hold Siemens harmless from any taxes, costs and penalties arising from same. Siemens' prices include the costs of its standard domestic packing only. Any packing deviation, including U.S. Government sealed packing, will be charged to Buyer. Increases, changes (including in application), adjustments or surcharges which may be incurred are for Buyer’s account. (e)Late Payments. Late payments shall bear interest at an annual percentage rate of twelve percent (12%) or the highest rate allowed by law, whichever is lower. (f)Disputed Invoice. If Buyer disputes all or any portion of an invoice, it must first deliver written notice to Siemens of the disputed amount and the basis for the dispute within twenty-one (21) days of receiving the invoice. Failure of Buyer to timely notify Siemens of any dispute constitutes a waiver of Buyer’s claim. If Buyer only disputes a portion of the invoice, Buyer must pay the undisputed portion in accordance with Article 2(a). Upon resolution of the dispute, Buyer must pay the invoice or the remainder of the invoice, plus any accrued interest on the late payment. (g)Suspension/Termination Right.Siemens may suspend work if an undisputed invoice is more than thirty (30) days past due. Siemens may terminate this Agreement if an undisputed invoice is more than sixty (60) days past due. Unless prohibited by law, Siemens may also terminate this Agreement immediately in the event of a material adverse change in Buyer’s financial condition including, but not limited to, bankruptcy, insolvency, liquidation or similar financial condition. 3.DELIVERY; TITLE; RISK OF LOSS. Products will be delivered F.O.B. Siemens point of shipment with title and risk of loss or damage passing to Buyer at that point. Buyer is responsible for all transportation, insurance and related expenses. The related expenses shall include any taxes, duties or documentation fees. Siemens may make partial shipments. Any shipping, delivery and installation dates are estimated dates only. Siemens is not liable for any loss or expense incurred by Buyer or Buyer's customers if Siemens fails to meet its delivery schedule. 4.DEFERMENT AND CANCELLATION. Buyer has no right to defer shipment but may cancel this Agreement on thirty (30) days written notice if Siemens has not already performed. If Buyer cancels this Agreement, it shall pay all cancellation charges including, without limitation: (i) the full price for any finished Product; (ii) for partially completed product, the portion of the price determined to be due by Siemens based on its percentage of completion of the Product; (iii) reasonable overhead and profit; and (iv) any payments due subcontractors and/or suppliers for any materials, components or products ordered which cannot be cancelled, refunded, or redirected for other beneficial use. 5.TRANSPORTATION AND STORAGE. (a) When Products are ready for shipment, Siemens will: (i) inform Buyer, and Buyer will then promptly give shipping instructions to Siemens; (ii) determine the method of transportation and shipment routing; and (iii) ship the Products with freight prepaid by normal transportation. If Buyer fails to provide timely shipping instructions, Siemens will ship the Products10/9/2020millbx02c_09292000_00_00_M00 4 Proposal Products with freight prepaid by normal transportation. If Buyer fails to provide timely shipping instructions, Siemens will ship the Products by normal transportation means to Buyer or to a storage location selected by Siemens. Buyer will pay or reimburse any excess transportation charges for special or expedited transportation. (b) If Products are placed into storage, delivery occurs and risk of loss transfers to Buyer when the Products are placed on the carrier for shipment to the storage location. If the Products are to be stored in the facility where manufactured, delivery occurs and risk of loss transfers to Buyer when placed in the storage location. Buyer will pay all Siemens’ storage expenses, including but not limited to, preparation for and placement into storage, handling, freight, storage, inspection, preservation, maintenance, taxes and insurance, upon receipt of an invoice(s) from Siemens. When conditions permit and upon payment to Siemens of all amounts due, Buyer must arrange, at its expense, to remove the Products from storage. Buyer bears the risk of loss, damage or destruction to Products in storage. 6.FORCE MAJEURE / DELAYS. If Siemens’ performance is delayed by any cause beyond its reasonable control (regardless of whether the cause was foreseeable), including without limitation acts of God, strikes, labor shortage or disturbance, fire, accident, war or civil disturbance, delays of carriers, cyber-attacks, terrorist attacks, failure of normal sources of supply, or acts or inaction of government, Siemens’ time of performance will be extended by a period equal to the length of the delay plus any consequences of the delay. Siemens will notify Buyer within a reasonable time after becoming aware of any such delay. 7.BUYER’S REQUIREMENTS. Siemens’ performance is contingent upon Buyer timely fulfilling all of its obligations under this Agreement. These obligations include the Buyer supplying all documents and approvals needed for Siemens to perform, including but not limited to technical information and data, drawing and document approvals, and necessary commercial documentation. Siemens may request a change order for an equitable adjustment in prices and times for performance, as well as for any additional costs or any delay resulting from the failure of Buyer or Buyer’s contractors, successors or assigns to meet these obligations. 8.INDEMNITY. Siemens and Buyer (each as an “Indemnitor”) shall indemnify the other (“Indemnitee”) from and against all third party claims alleging bodily injury, death or damage to a third party’s tangible property, but only to the extent caused by the Indemnitor’s negligent acts or omissions. If the injury or damage is caused by the parties’ joint or contributory negligence, the loss and/or expenses shall be borne by each party in proportion to its degree of fault. No part of the Product(s) or Buyer’s site is considered third party property. Indemnitee shall provide the Indemnitor with prompt written notice of any third party claims covered by this Article. Indemnitor has the unrestricted right to select and hire counsel and the exclusive right to conduct the legal defense and/or settle the claim on the Indemnitee’s behalf. The Indemnitee shall not make any admission(s) which might be prejudicial to the Indemnitor and shall not enter into a settlement without the express permission of the Indemnitor. 9.WARRANTIES.(a) Warranties. Siemens warrants that: (i) each Product is free from defects in material and workmanship; (ii) each Product materially conforms to Siemens' specifications that are attached to, or expressly incorporated into this Agreement; and (iii) at the time of delivery, Siemens has title to each Product free and clear of liens and encumbrances (collectively, the “Warranties"). The Warranties do not apply to software furnished by Siemens. The sole and exclusive warranties for any software are set forth in the applicable Software License/Warranty Addendum. (b) Conditions to the Warranties. The Warranties are conditioned on: (i) no repairs, modifications or alterations being made to the Product other than by Siemens or its authorized representatives; (ii) Buyer handling, using, storing, installing, operating and maintaining the Product in compliance with any parameters or instructions in any specifications attached to, or incorporated into this Agreement; (iii) compliance with all generally accepted industry standards; (iv) Buyer discontinuing use of the Product after it has, or should have had, knowledge of any defect; (v) Buyer providing prompt written notice of any warranty claims within the warranty period described below; (vi) at Siemens' discretion, Buyer either removing and shipping the Product or non-conforming part thereof to Siemens, at Buyer's expense, or granting Siemens reasonable access to the Products to assess the warranty claims; (vii) Product not having been subjected to accident (including force majeure), alteration, abuse or misuse; and (viii) Buyer not being in default of any payment obligation. (c) Exclusions from Warranty Coverage. The Warranties do not apply to any equipment not provided by Siemens under this Agreement. Any Product that is described as being experimental, developmental, prototype, or pilot is specifically excluded from the Warranties and is provided to Buyer “as is” with no warranties of any kind. Normal wear and tear is excluded, including any expendable items that comprise part of the Product (such as fuses, light bulbs and lamps). Siemens does not warrant or guarantee that any Product will be secure from cyber threats, hacking or similar malicious activity. Products that are networked, connected to the internet, or otherwise connected to computers or other devices must be appropriately protected by Buyer and/or end user against unauthorized access. (d) Warranty Period. Buyer must provide written notice of any claims for breach of Warranties by the earlier of twelve (12) months from initial operation of the Product or eighteen (18) months from shipment. Additionally, absent written notice within the warranty period, any use or possession of the Product after expiration of the warranty period is conclusive evidence that the Warranties have been satisfied. (e) Remedies. Buyer's sole and exclusive remedies for breach of the Warranties are limited, at Siemens' discretion, to repair or replacement of the Product, or its non-conforming parts, within a reasonable time period, or refund of all or part of the purchase price. The warranty on repaired or replaced parts is limited to the remainder of the original warranty period. Unless Siemens agrees otherwise in writing, Buyer will be10/9/2020millbx02c_09292000_00_00_M00 5 Proposal repaired or replaced parts is limited to the remainder of the original warranty period. Unless Siemens agrees otherwise in writing, Buyer will be responsible for any costs associated with: (i) gaining access to the Product; (ii) removal, disassembly, replacement, installation, or reinstallation of any equipment, materials or structures to permit Siemens to perform its warranty obligations; (iii) transportation to and from the Siemens factory or repair facility; and (iv) damage to equipment components or parts resulting in whole or in part from non-compliance by the Buyer with Article 9(b) or from their deteriorated condition. All exchanged Products replaced under this Warranty will become the property of Siemens. (f) Transferability. The Warranties are only transferable during the warranty period and only to the Product’s initial end-user. (g) THE WARRANTIES IN THIS ARTICLE 9 ARE SIEMENS' SOLE AND EXCLUSIVE WARRANTIES AND ARE SUBJECT TO THE LIMITS OF LIABILITY IN ARTICLE 10 BELOW. SIEMENS MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, COURSE OF DEALING AND USAGE OF TRADE. 10.LIMITATION OF LIABILITY. NOTWITHSTANDING ANYTHING IN THIS AGREEMENT TO THE CONTRARY, SIEMENS IS NOT LIABLE, WHETHER BASED IN CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, INDEMNITY OR ANY OTHER LEGAL OR EQUITABLE THEORY, FOR: LOSS OF USE, REVENUE, SAVINGS, PROFIT, INTEREST, GOODWILL OR OPPORTUNITY, COSTS OF CAPITAL, COSTS OF REPLACEMENT OR SUBSTITUTE USE OR PERFORMANCE, LOSS OF INFORMATION AND DATA, LOSS OF POWER, VOLTAGE IRREGULARITIES OR FREQUENCY FLUCTUATION, CLAIMS ARISING FROM BUYER’S THIRD PARTY CONTRACTS, OR FOR ANY TYPE OF INDIRECT, SPECIAL, LIQUIDATED, PUNITIVE, EXEMPLARY, COLLATERAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR FOR ANY OTHER LOSS OR COST OF A SIMILAR TYPE. SIEMENS’ MAXIMUM LIABILITY UNDER THIS AGREEMENT IS THE ACTUAL PURCHASE PRICE RECEIVED BY SIEMENS FOR THE PRODUCT THAT GAVE RISE TO THE CLAIM. BUYER AGREES THAT THE EXCLUSIONS AND LIMITATIONS IN THIS ARTICLE 10 WILL PREVAIL OVER ANY CONFLICTING TERMS AND CONDITIONS IN THIS AGREEMENT AND MUST BE GIVEN FULL FORCE AND EFFECT, WHETHER OR NOT ANY OR ALL SUCH REMEDIES ARE DETERMINED TO HAVE FAILED OF THEIR ESSENTIAL PURPOSE. THESE LIMITATIONS OF LIABILITY ARE EFFECTIVE EVEN IF SIEMENS HAS BEEN ADVISED BY BUYER OF THE POSSIBILITY OF SUCH DAMAGES. THE WAIVERS AND DISCLAIMERS OF LIABILITY, RELEASES FROM LIABILITY AND LIMITATIONS ON LIABILITY EXPRESSED IN THIS ARTICLE 10 EXTEND TO SIEMENS’ AFFILIATES, PARTNERS, PRINCIPALS, SHAREHOLDERS, DIRECTORS, OFFICERS, EMPLOYEES, SUPPLIERS, AGENTS, AND SUCCESSORS AND ASSIGNS. 11.PATENT AND COPYRIGHT INFRINGEMENT. Siemens will, at its option and expense, defend or settle any suit or proceeding brought against Buyer based on an allegation that any Product or use thereof for its intended purpose constitutes an infringement of any Patent Cooperation Treaty country member’s patent or misappropriation of a third party’s trade secret or copyright in the country where the Product is delivered by Siemens. Buyer will promptly give Siemens written notice of the suit or proceeding and the authority, information, and assistance needed to defend the claims. Siemens shall have the full and exclusive authority to defend and settle such claim(s) and will pay the damages and costs awarded in any suit or proceeding so defended. Buyer shall not make any admission(s) which might be prejudicial to Siemens and shall not enter into a settlement without Siemens’ consent. Siemens is not responsible for any settlement made without its prior written consent. If the Product, or any part thereof, as a result of any suit or proceeding so defended is held to constitute infringement or its use by Buyer is enjoined, Siemens will, at its option and expense, either: (i) procure for Buyer the right to continue using said Product; (ii) replace it with substantially equivalent non-infringing Product; or (iii) modify the Product so it is non-infringing. Siemens will have no duty or obligation under this Article 11 if the Product is: (i) supplied according to Buyer's design or instructions and compliance therewith has caused Siemens to deviate from its normal course of performance; (ii) modified by Buyer or its contractors after delivery; or (iii) combined by Buyer or its contractors with devices, methods, systems or processes not furnished hereunder and by reason of said design, instruction, modification, or combination a suit is brought against Buyer. In addition, if by reason of such design, instruction, modification or combination, a suit or proceeding is brought against Siemens, Buyer must protect Siemens in the same manner and to the same extent that Siemens has agreed to protect Buyer under this Article 11. THIS ARTICLE 11 IS AN EXCLUSIVE STATEMENT OF SIEMENS’ DUTIES AND BUYER’S REMEDIES RELATING TO PATENTS, TRADE SECRETS AND COPYRIGHTS, AND DIRECT OR CONTRIBUTORY INFRINGEMENT THEREOF. 12.CONFIDENTIALITY. (a) Both during and after the term of this Agreement, the parties will treat as confidential all information obtained from the disclosing party and all information compiled or generated by the disclosing party under this Agreement for the receiving party, including but not limited to business information, manufacturing information, technical data, drawings, flow charts, program listings, software code, and other software, plans and projections. Neither party may disclose or refer to the work to be performed under this Agreement in any manner that identifies the other party without advance written permission. However, Siemens has the right to share confidential information with its affiliates and subcontractors, provided those recipients are subject to the same confidentiality obligations set forth herein. (b) Nothing in this Agreement requires a party to treat as confidential any information which: (i) is or becomes generally known to the public, without the fault of the receiving party; (ii) is disclosed to the receiving party, without obligation of confidentiality, by a third party having the right to make such disclosure; (iii) was previously known to the receiving party, without obligation of confidentiality, which fact can be10/9/2020millbx02c_09292000_00_00_M00 6 Proposal right to make such disclosure; (iii) was previously known to the receiving party, without obligation of confidentiality, which fact can be demonstrated by means of documents which are in the possession of the receiving party upon the date of this Agreement; (iv) was independently developed by receiving party or its representatives, as evidenced by written records, without the use of discloser’s confidential information; or (v) is required to be disclosed by law, except to the extent eligible for special treatment under an appropriate protective order, provided that the party required to disclose by law will promptly advise the originating party of any requirement to make such disclosure to allow the originating party the opportunity to obtain a protective order and assist the originating party in so doing. (c) It is Siemens’ policy not to unlawfully or improperly receive or use confidential information, including trade secrets, belonging to others. This policy precludes Siemens from obtaining, directly or indirectly from any employee, contractor, or other individual rendering services to Siemens confidential information of a prior employer, client or any other person which such employee, contractor, or individual is under an obligation not to disclose. Buyer agrees to abide by this policy. 13.COMPLIANCE WITH LAWS. The parties agree to comply with all applicable laws and regulations, including but not limited to those relating to the manufacture, purchase, resale, exportation, transfer, assignment or use of the Products. 14.CHANGES IN WORK. No change will be made to the scope of work unless Buyer and Siemens agree in writing to the change and any resulting price, schedule or other contractual modifications. If any change to any law, rule, regulation, order, code, standard or requirement impacts Siemens’ obligations or performance under this Agreement, Siemens may request a change order for an equitable adjustment in the price and time of performance. 15.NON-WAIVER. Any waiver by a party of strict compliance with this Agreement must be in writing, and any failure by the parties to require strict compliance in one instance will not waive its right to insist on strict compliance thereafter. 16.MODIFICATION OF TERMS. This Agreement may only be modified by a written instrument signed by authorized representatives of both parties. 17.ASSIGNMENT. Neither party may assign all or part of this Agreement, or any rights or obligations under this Agreement, without the prior written consent of the other; but either party may assign its rights and obligations, without recourse or consent, to any parent, wholly owned subsidiary, or affiliate or affiliate’s successor organization (whether as a result of reorganization, restructuring or sale of substantially all of a party’s assets). However, Buyer shall not assign this Agreement to: a competitor of Siemens; an entity in litigation with Siemens; or an entity lacking the financial capability to satisfy Buyer’s obligations. Any assignee expressly assumes the performance of any obligation assigned. Siemens may grant a security interest in this Agreement and/or assign proceeds of this Agreement without Buyer’s consent. 18.APPLICABLE LAW AND JURISDICTION. This Agreement is governed by and construed in accordance with the laws of the State of Delaware, without regard to its conflict of laws principles. The application of the United Nations Convention on Contracts for the International Sale of Goods is excluded. BOTH SIEMENS AND BUYER KNOWINGLY, VOLUNTARILY AND IRREVOCABLY WAIVE ALL RIGHTS TO A JURY TRIAL IN ANY ACTION OR PROCEEDING RELATED IN ANY WAY TO THIS AGREEMENT. Each party agrees that claims and disputes arising out of this Agreement must be decided exclusively in a federal or state court of competent jurisdiction located in a state in which either Buyer or Siemens maintains its principal place of business. Each party submits to the personal jurisdiction of such courts for the purpose of litigating any claims or disputes. 19.SEVERABILITY. If any provision of this Agreement is held invalid, illegal or unenforceable, the remaining provisions will not in any way be affected or impaired. A court may modify the invalid, illegal or unenforceable provision to reflect, as closely as possible, the parties’ original intent. 20.EXPORT / IMPORT COMPLIANCE. Buyer acknowledges that Siemens is required to comply with applicable export / import laws and regulations relating to the sale, export, import, transfer, assignment, disposal and use of the Products, including any export / import license requirements. Buyer agrees that Products will not at any time directly or indirectly be used, exported, imported, sold, transferred, assigned or otherwise disposed of in a manner which will result in non-compliance with any export / import laws and regulations. Siemens’ continuing performance hereunder is conditioned on compliance with such export / import laws and regulations at all times. 21.PRODUCT RETURNS. Prior to the return of any Product to Siemens, Buyer must identify the Product or portion thereof and obtain written authorization and shipping instructions from Siemens. Siemens has the right, in its sole discretion, to permit or reject any such return. Siemens’ authorization to return any Product to Siemens does not relieve Buyer of its obligation to pay for such Product. Upon receipt, inspection, and acceptance of the Product by Siemens, Siemens will issue a credit memo to Buyer, less applicable re-stocking fees. Siemens reserves the right to reject any hazardous material. 22.NUCLEAR. Unless expressly authorized in writing by Siemens, the Products must not be used in or in connection with a nuclear facility or application. If Buyer uses any Product in connection with any nuclear facility or activity, it does so at its own risk and Buyer will indemnify, defend and hold Siemens harmless, and waives and will require its insurers to waive all right of recovery against Siemens for any damage, loss, destruction, injury or death resulting from a “nuclear incident,” as defined in the Atomic Energy Act of 1954, as amended, whether or not due to Siemens’ negligence. Siemens’ consent to Buyer’s use of the Product in connection with any nuclear facility or application will be subject to additional terms and conditions that Siemens deems necessary to protect its interests. 23.SURVIVAL.The articles titled “Patent and Copyright Infringement,” “Limitation of Liability,” “Confidentiality,” “Delivery; Title;10/9/2020millbx02c_09292000_00_00_M00 7 Proposal 23.SURVIVAL.The articles titled “Patent and Copyright Infringement,” “Limitation of Liability,” “Confidentiality,” “Delivery; Title; Risk of Loss,” “Export / Import Compliance,” and “Nuclear” survive termination, expiration or cancellation of this Agreement. PURCHASER's ACCEPTANCE Siemens Industry, Inc. The foregoing is hereby accepted. By ___________________________________________________ (Name of Purchaser) By ________________________________________________ Title ________________________________________________ Date ________________________________________________ Siemens Industry, Inc. SIEMENS STANDARD TERMS AND CONDITIONS OF SALE FOR PRODUCTS July 1, 2016 (Version1.1/Restricted) 10/9/2020millbx02c_09292000_00_00_M00 8 Project Name: Quote #: Cayuga Flats - 209 Elm Street millbx02c_09292000_00_00_M00 CONTENTS:TYZ:PM_POWERMOD US2:WEB3400B US2:LK31750N2 US2:WMM52125RJB US2:WML13225RJ Product Family:Multi-Family Metering TYZ:PM_POWERMOD US2:WEB3400B US2:LK31750N2 US2:WMM52125RJB US2:WML13225RJ - - 1000739311 V P SUPPLY CORP millbx02c - - 1000739311-20000-1 1 2 Cayuga Flats - 209 Elm Street SCHULER-HAAS ELECTRIC CORP - 400A E.S.E. - - 1000739311 V P SUPPLY CORP millbx02c - - 1000739311-20000-1 1 2 Cayuga Flats - 209 Elm Street SCHULER-HAAS ELECTRIC CORP - 400A E.S.E. 200 23.50 27.75 Mod. Status:STANDARD Grnd. to Top Mtr. (in):50 Grnd. to Bot. Mtr. (in):50 Mtr. to Mtr. Ctr. Line (in):NA Cat. Num.:WML13225RJ Mod.:WML ABC Grnd. Clr. (in):32.09 HOUSE 100 100 100 100 100 13.09 61.31 Mod. Status:STANDARD Grnd. to Top Mtr. (in):69 Grnd. to Bot. Mtr (in):33 Mtr. to Mtr. Ctr. Line (in):9 Typ. Cat. Num.:WMM52125RJB Mod.:WMM AB BC AC AB BC Grnd. Clr. (in):20.90 APTS. APTS. APTS. APTS. APTS. 100 100 100 100 100 13.09 61.31 Mod. Status:STANDARD Grnd. to Top Mtr. (in):69 Grnd. to Bot. Mtr (in):33 Mtr. to Mtr. Ctr. Line (in):9 Typ. Cat. Num.:WMM52125RJB Mod.:WMM AB BC AC AB BC Grnd. Clr. (in):20.90 APTS. APTS. APTS. APTS. APTS. 100 100 100 100 100 13.09 61.31 Mod. Status:STANDARD Grnd. to Top Mtr. (in):69 Grnd. to Bot. Mtr (in):33 Mtr. to Mtr. Ctr. Line (in):9 Typ. Cat. Num.:WMM52125RJB Mod.:WMM AB BC AC AB BC Grnd. Clr. (in):20.90 APTS. APTS. APTS. APTS. APTS. 28.28 54.88 Mod. Status:STANDARD Cat. Num.:WEB3400B Mod.:WEB Grnd. Clr. (in):12.00 45.28 THRU BUS GROUND LINE 91.050 *WARNING: CHECK UTILITY REQUIREMENT BEFORE INSTALLATION Overall Width GENERAL INFORMATION: MINIMUM METER SOCKET HEIGHT: SYSTEM VOLTAGE: MAXIMUM METER SOCKET HEIGHT: MINIMUM GROUND CLEARANCE: PAINT: 3Ø/4W 208/120V WYE ANSI 61 (STD) 12.0 33.06 69.06 MAXIMUM MODULE HEIGHT:82.21 NO.REVISIONS DRAWN DATE BY: 01 millbx02c10012010-1-2020 JOB P.O. TIE S.O. CUST. ENG. LOC.BY DATE APP. APP. MFG. LOC. DWG. FILE DESIGNATION DWG. NO. REV. SHEETNorcross, Georgia Siemens Industry, Inc. 10-1-2020 1OF CONSLTCONTR JOB P.O. TIE S.O. CUST. ENG. LOC.BY DATE APP. APP. MFG. LOC. DWG. FILE DESIGNATION DWG. NO. REV. SHEETNorcross, Georgia Siemens Industry, Inc. 10-1-2020 1OF CONSLTCONTR - - 1000739311 V P SUPPLY CORP millbx02c - - 1000739311-20000-2 2 2 Cayuga Flats - 209 Elm Street SCHULER-HAAS ELECTRIC CORP - 400A E.S.E. - - 1000739311 V P SUPPLY CORP millbx02c - - 1000739311-20000-2 2 2 Cayuga Flats - 209 Elm Street SCHULER-HAAS ELECTRIC CORP - 400A E.S.E. 2.50 4.55 4.27 2.27 Mod.:WML 2.31 3.29 3.523.542.77 MOD.:WMM 2.31 3.29 3.523.542.77 MOD.:WMM 2.31 3.29 3.523.542.77 MOD.:WMM 9.38 21.57 Mod.:WEB 9.08.098.098.09 13.06 JOB P.O. TIE S.O. CUST. ENG. LOC.BY DATE APP. APP. MFG. LOC. DWG. FILE DESIGNATION DWG. NO. REV. SHEETNorcross, Georgia Siemens Industry, Inc. 10-1-2020 1OF CONSLTCONTR JOB P.O. TIE S.O. CUST. ENG. LOC.BY DATE APP. APP. MFG. LOC. DWG. FILE DESIGNATION DWG. NO. REV. SHEETNorcross, Georgia Siemens Industry, Inc. 10-1-2020 1OF CONSLTCONTR Building Technologies Division Size DO NOT SCALE DRAWING SHEETDwnDate Dwg. No. Siemens Industry, Inc. B KAM 1 OF 1 PowerMod™ Meter Stack 125A_3Ph_5Pos WMM52125J, WMM52125RJ, WMM52125RJB Catalog Numbers: Schematic Catalog Numbers, Features and Ratings Module Description Main Breakers Switches Tap/Terminal Boxes Pull Boxes Meter Module Extension Box Bussed Elbow FOR USE WITH: Murray Series# DB_W DPT_W, DT_W DTB_W DPB_W DG_W, DC_W, DL_W DS DL Siemens Series# (W)MC, WB, WEB WMP, WMS, WS, WES WMTB, WTB, WET WMMB, WPB, WAPB WMM, WxMM, WMT, WML, WMK WMEX, WSP (W)BE Additional Modules MAIN BUS RATING: 1200 AMPS 240V AC MAX. METER SOCKET RATING: 125 AMPS CONTINUOUS 65,000 AIC RATING MAX., 125 AMPS MAX. BRANCH RATING 3 PHASE INPUT / 1 PHASE OUTPUT TYPE 3R OUTDOOR ENCLOSURE MOUNTING RAILS AND ADJUSTABLE BRACKETS FOR SECURE MOUNTING WMM52125RJB SHOWN VIEW SHOWN WITHOUT COVER SECTION THRU SPRING-LOADED STUDS #10-32 x 7/8 SCREWS ENCLOSURE WALL SPRING LOADED STUDS - SEE DETAIL REMOVABLE BACK PLATE WITH (6) 1, 1-1/4, 1-1/2, 2" KOs (6) KOs 1, 1-1/4, 1-1/2, 2" (5) #4-2/0 NEUTRAL LUGS (6) #4-2/0 GROUND LUGS HORN BYPASS BARREL LOCK PROVISIONS ENLARGED SOCKET DETAIL 5th JAW CAN BE RELOCATED TO 6 O'CLOCK POSITION Rephasing Instructions BC CONNECTIONAB CONNECTION METER STRAP LINE BUS STRAP METER BLOCKMETER BLOCK AC CONNECTION METER BLOCK BUS A BUS B BUS C BUS A BUS B BUS C BUS A BUSB BUS C PHASE BUS NUTS METER SOCKET NUTS TOP VIEW (6) CENTER PUNCH LOCATORS Factory installed phasing is top to bottom. Each meter socket can be phased AB, BC, or AC by repositioning line bus straps. If a different phase arrangement is needed, loosen hex nuts and reconnect one or both line bus straps, then retighten the hex nuts to 60-65 lb.-in. Tighten hex nut at meter socket first, then tighten hex nut on vertical phase bus. AB, BC, AC, AB, and BC A N B C A N B C Equip.Grd. Equip. Grd. A B C FACTORY INSTALLED, MOVABLE TO TOP POSITION 12-5/32 24-3/8 TO CROSS BUS CENTER 36" TO BOTTOM OF QUICK ROLL BRACKET 1/27/10 Catalog No. Branch Rating Meter Positions Cover Type 5th Jaw Horn Bypass WMM52125J 125A Max.5 Ring Installed WMM52125RJ 125A Max.5 Ringless Installed WMM52125RJB 125A Max.5 Ringless Installed Installed Main Bus 3 Phase 3 Phase 3 Phase Accessories Description Horn By-Pass Mod End Closure Plate 5th Jaw Mod Meter Cover Plate Meter Socket 125A Breaker Mounting Meter Cover, Ring Type Meter Cover, Ringless Parts Kit Load Cover Screws Bottom Pull Cover Mounting Rail Mounting Clip Quick Phase Strap Catalog No. ECMFH WMEP ECMF5 ECCP3 ECMFS ECMFBM1 ECMFMC ECMFMCR ECMFPK ECMFCS ECMFC MMRAIL MMCLIP ECMFPS Breaker Cover Repl.ECBC Mounting Tabs (2)ECMFTAB Ground/Ntl Bar Kit ECMFGN125 Ringless Conversion Kit ECMMRLCK Wall Mounting Rail (60")MMZR60 Back Rail/Clip ECMFWLCLIP QP Breaker Retainer ECMBR2 KO Plate with Knockouts ECMMKOP KO Plate w/o Knockouts ECMMNKOP Connect Modules Using: Single Bolt Joint QuickConnect Catalog Number / Torque SBJ4, Torque 400-480 lb-in (35-40 ft.-lb.) QC4, Torque 400-440 lb-in (35-36 ft.-lb.) © 2010 Copyright Siemens Industry, Inc. Project Name: Quote #: Cayuga Flats - 209 Elm Street millbx02c_09292000_00_00_M00 CONTENTS:Q2100H Product Family:Load Center Mains, Feeders, and Miniature Circuit Breakers Q2100H Type QT circuit breakers Features and benefits  1/2 inch width-per-pole construction: dual and quad styles  Requires 1/2 the space of 1 inch width circuit breakers  SWD rated — 15 and 20 amp.  HACR rated  UL listed  CSA certified Siemens type QT dual circuit breakers are 1 inch wide and consist of (2) 1-pole breakers, in varying combinations of ampere ratings from 15 to 30 amp.Type QT quad circuit breakers are 2 inches wide and consist of either (1) 2-pole and (2) 1-pole, or (2) 2-pole breakers. 2-pole constructions range from 15-50 amps and are available with internal common trip. All type QT circuit breakers are plug-in style and load terminals are provided with the units.They are rated for 120/240V AC and calibrated for 40C maximum ambient applications. Thestandard interrupting rating is 10k AIC.Breaker type Dimensions (inches) Length Width Depth Dual Quad 3-1/8 3-1/8 1 2 3 3 Q1515 Q22020CT2 Selection Information QT Dual Breaker, (2) 1-Poles QT Quad Breaker, (2) 2-Poles, Non-Common Trip10k AIC Interrupting Rating 10k AIC Interrupting Rating Complete Breaker Ampere Unenclosed Wire Range Rating Catalog Number Cu Al 15-15 Q1515 #14 - #8 #12 - #8 15-20 Q1520 #14 - #8 #12 - #8 20-20 Q2020 #14 - #8 #12 - #8 20-30 Q2030 #14 - #6 #12 - #6 SHIPPING:12 per carton, 48 per master carton (Wt. 20 lbs.) For Non-CTL version, add “NC” to end of catalog number. The 1-pole circuit breakers are always 15 or 20 amp. Example: The Q21540CT is (1) 2-pole, 40 amp and (2) 1-pole, 15 amp. Knockout Diagrams Siemens Energy & Automation, Inc. Residential Products 5400 Triangle Parkway Norcross, GA 30092 www.sea.siemens.com Siemens is a registered trademark of Siemens AG.Bulletin RPPN-SQT98 (New) 3M1200OA Printed in U.S.A. Complete Breaker Ampere Unenclosed Wire Range Rating Catalog Number Cu Al 15-15 Q21515 #14 - #8 #12 - #8 20-20 Q22020 #14 - #8 #12 - #8 30-20 Q23020 #14 - #6 #12 - #6 30-30 Q23030 #14 - #6 #12 - #6 30-50 Q23050 #8 - #6 #8 - #4 40-20 Q24020 #8 - #6 #8 - #4 40-30 Q24030 #8 - #6 #8 - #4 40-40 Q24040 #8 - #6 #8 - #4 SHIPPING:6 per carton, 24 per master carton (Wt. 20 lbs.) QT Quad Breaker, (1) 2-Pole & (2) 1-Poles, Common Trip10k AIC Interrupting Rating QT Quad Breaker, (2) 2-Poles, Common Trip 10k AIC Interrupting Rating Complete Breaker Ampere Unenclosed Wire Range Rating Catalog Number Cu Al 15-15 Q21515CT #14 - #8 #12 - #8 15-20 Q21520CT #14 - #8 #12 - #8 15-25 Q21525CT #14 - #8 #12 - #8 15-30 Q21530CT #14 - #6 #12 - #6 15-40 Q21540CT #8 - #6 #8 - #4 15-50 Q21550CT #8 - #6 #8 - #4 20-20 Q22020CT #14 - #8 #12 - #8 20-30 Q22030CT #14 - #6 #12 - #6 20-40 Q22040CT #8 - #6 #8 - #4 20-50 Q22050CT #8 - #6 #8 - #4 SHIPPING:6 per carton, 24 per master carton (Wt. 20 lbs.) Complete Breaker Ampere Unenclosed Wire Range Rating Catalog Number Cu Al 15-15 Q21515CT2 #14 - #8 #12 - #8 20-20 Q22020CT2 #14 - #8 #12 - #8 30-20 Q23020CT2 #14 - #6 #12 - #6 30-30 Q23030CT2 #14 - #6 #12 - #6 30-50 Q23050CT2 #8 - #6 #8 - #4 40-20 Q24020CT2 #8 - #6 #8 - #4 40-30 Q24030CT2 #8 - #6 #8 - #4 40-40 Q24040CT2 #8 - #6 #8 - #4 SHIPPING:6 per carton, 24 per master carton (Wt. 20 lbs.) ON 2.38 TRIPPED RESET R.69 2.0 1.5 1.0 .50 .25 Pressure WireConnector .75 2.78 .08 .06 .24 .43 3.122.22 18 24 .28 .50 Quad (Dual would be same profile, but 1” wide) Dimensions (Inches) www.usa.siemens.com Subject to change without prior notice Order No.: CBFL-SQT98-1112 All rights reserved Printed in USA © 2012 Siemens Industry, Inc. Siemens Industry, Inc. 5400 Triangle Parkway Norcross, GA 30092 1-800-964-4114 info.us@siemens.com The information provided in this flyer contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners. QT dual breaker,(2) 1-Poles 10k AIC interrupting rating Ampere rating Complete breaker unenclosed Wire range Catalog number Cu Al 15-15 Q1515#14 - #8 #12 - #8 15-20 Q1520#14 - #8 #12 - #8 20-20 Q2020#14 - #8 #12 - #8 20-30 Q2030 #14 - #6 #12 - #6 Shipping: 12 per carton, 48 per master carton (Wt. 20 lbs.) QT quad breaker,(1) 2-Pole & (2) 1-Poles, common trip 10k AIC interrupting ratings Ampere rating Complete breaker unenclosed Wire range Catalog number Cu Al 15-15 Q21515CT #14 - #8 #12 - #8 15-20 Q21520CT #14 - #8 #12 - #8 15-25 Q21525CT #14 - #8 #12 - #8 15-30 Q21530CT #14 - #6 #12 - #6 15-40 Q21540CT #8 - #6 #8 - #4 15-50 Q21550CT #8 - #6 #8 - #4 20-20 Q22020CT #14 - #8 #12 - #8 20-30 Q22030CT #14 - #6 #12 - #6 20-40 Q22040CT #8 - #6 #8 - #4 20-50 Q22050CT #8 - #6 #8 - #4 Shipping: 6 per carton, 24 per master carton (Wt. 20 lbs.)  For Non-CTL version, add “NC” to end of catalog number.  The 1-Pole circuit breakers are always 15 or 20 amp. Example: The Q21540CT is (1) 2-Pole, 40 amp and (2) 1-Pole, 15 amp. Selection information Knockout diagrams Quad (dual would be same profile, but 1”wide) dimensions (inches) QT quad breaker,(2) 2-Poles, common trip 10k AIC interrupting rating Ampere rating Catalog number Wire range Cu Al 15-15 Q21515CT2#14-#8 #12-#8 15-30 Q21530CT2 #14-#6 #12-#6 20-20 Q22020CT2#14-#8 #12-#8 20-50 Q22050CT2 #8-#6 #8-#4 30-20 Q23020CT2#14-#6 #12-#6 30-25 Q23025CT2 #14-#6 #12-#6 30-30 Q23030CT2#14-#6 #12-#6 30-50 Q23050CT2 #8-#6 #8-#4 40-20 Q24020CT2#8-#6 #8-#4 40-30 Q24030CT2#8-#6 #8-#4 40-40 Q24040CT2#8-#6 #8-#4 Shipping: 6 per carton, 24 per master carton (Wt. 20 lbs.) Selection Information QT Dual Breaker, (2) 1-Poles QT Quad Breaker, (2) 2-Poles, Non-Common Trip 10k AIC Interrupting Rating 10k AIC Interrupting Rating Complete Breaker Ampere Unenclosed Wire Range Rating Catalog Number Cu Al 15-15 Q1515 #14 - #8 #12 - #8 15-20 Q1520 #14 - #8 #12 - #8 20-20 Q2020 #14 - #8 #12 - #8 20-30 Q2030 #14 - #6 #12 - #6 SHIPPING:12 per carton, 48 per master carton (Wt. 20 lbs.) For Non-CTL version, add “NC” to end of catalog number. The 1-pole circuit breakers are always 15 or 20 amp. Example: The Q21540CT is (1) 2-pole, 40 amp and (2) 1-pole, 15 amp. Knockout Diagrams Siemens Energy & Automation, Inc. Residential Products 5400 Triangle Parkway Norcross, GA 30092 www.sea.siemens.com Siemens is a registered trademark of Siemens AG.Bulletin RPPN-SQT98 (New) 3M1200OA Printed in U.S.A. Complete Breaker Ampere Unenclosed Wire Range Rating Catalog Number Cu Al 15-15 Q21515 #14 - #8 #12 - #8 20-20 Q22020 #14 - #8 #12 - #8 30-20 Q23020 #14 - #6 #12 - #6 30-30 Q23030 #14 - #6 #12 - #6 30-50 Q23050 #8 - #6 #8 - #4 40-20 Q24020 #8 - #6 #8 - #4 40-30 Q24030 #8 - #6 #8 - #4 40-40 Q24040 #8 - #6 #8 - #4 SHIPPING:6 per carton, 24 per master carton (Wt. 20 lbs.) QT Quad Breaker, (1) 2-Pole & (2) 1-Poles,Common Trip 10k AIC Interrupting Rating QT Quad Breaker, (2) 2-Poles, Common Trip 10k AIC Interrupting Rating Complete Breaker Ampere Unenclosed Wire Range Rating Catalog Number Cu Al 15-15 Q21515CT #14 - #8 #12 - #8 15-20 Q21520CT #14 - #8 #12 - #8 15-25 Q21525CT #14 - #8 #12 - #8 15-30 Q21530CT #14 - #6 #12 - #6 15-40 Q21540CT #8 - #6 #8 - #4 15-50 Q21550CT #8 - #6 #8 - #4 20-20 Q22020CT #14 - #8 #12 - #8 20-30 Q22030CT #14 - #6 #12 - #6 20-40 Q22040CT #8 - #6 #8 - #4 20-50 Q22050CT #8 - #6 #8 - #4 SHIPPING:6 per carton, 24 per master carton (Wt. 20 lbs.) Complete Breaker Ampere Unenclosed Wire Range Rating Catalog Number Cu Al 15-15 Q21515CT2 #14 - #8 #12 - #8 20-20 Q22020CT2 #14 - #8 #12 - #8 30-20 Q23020CT2 #14 - #6 #12 - #6 30-30 Q23030CT2 #14 - #6 #12 - #6 30-50 Q23050CT2 #8 - #6 #8 - #4 40-20 Q24020CT2 #8 - #6 #8 - #4 40-30 Q24030CT2 #8 - #6 #8 - #4 40-40 Q24040CT2 #8 - #6 #8 - #4 SHIPPING:6 per carton, 24 per master carton (Wt. 20 lbs.) ON 2.38 TRIPPED RESET R.69 2.01.51.0 .50 .25 PressureWire Connector .75 2.78 .08 .06 .24 .43 3.122.22 18 24 .28 .50 Quad (Dual would be same profile, but 1” wide) Dimensions (Inches) Project Name: Quote #: Cayuga Flats - 209 Elm Street millbx02c_09292000_00_00_M00 CONTENTS:US2:QRH23B200 Product Family:Molded Case Circuit Breakers US2:QRH23B200