HomeMy WebLinkAboutRobert Purcell Community Center
ROBERT PURCELL
COMMUNITY CENTER
MAIL CENTER
RENOVATION
Project Manual & Specifications
May 21, 2019
Owner
Cornell University
Ithaca, NY 14853
Architect
Cornell University
Facilities Engineering
201 Humphreys Service Building
Ithaca, NY 14853
ROBERT PURCELL COMMUNITY CENTER TABLE OF CONTENTS
MAIL CENTER RENOVATION Page 1
Instructions to Bidders
Bid Form
General Conditions and Exhibits
DIVISION 1 - GENERAL REQUIREMENTS
Section 01 11 00 Summary of the Work
Section 01 14 00 Work Restrictions
Section 01 25 00 Substitutions and Product Options
Section 01 31 19 Project Meetings
Section 01 31 50 Electronic Project Management
Section 01 32 16 Construction Schedule
Section 01 32 33 Photographic Documentation
Section 01 33 00 Submittal Procedures
Section 01 35 29 General Health & Safety
Section 01 35 43 General Environmental Requirements
Section 01 35 44 Spill Control
Section 01 41 00 Regulatory Requirements
Section 01 42 00 References
Section 01 45 00 Quality Control
Section 01 50 00 Temporary Facilities and Controls
Section 01 51 00 Temporary Utilities
Section 01 51 23 Heat During Construction
Section 01 66 00 Storage and Protection
Section 01 73 29 Cutting, Patching and Repairing
Section 01 77 00 Project Closeout
Section 01 78 22 Fixed Equipment Inventory
Section 01 78 23 Operating and Maintenance Data
Section 01 78 36 Warranties and Bonds
Section 01 78 39 Record Documents
ROBERT PURCELL COMMUNITY CENTER TABLE OF CONTENTS
MAIL CENTER RENOVATION Page 2
DRAWINGS
T-000 TITLE SHEET
ARCHITECTURAL
A-000 1ST FLR CODE PLAN, GENERAL NOTES, SYMBOLOGY, AND ABBREVIATIONS
A-101 PARTIAL 1ST FLOOR - DEMOLITION PLAN
A-102 PROPOSED PARTIAL 1ST FLOOR RENOVATION / FURNITURE PLAN
A-103 PARTIAL 1ST FLOOR - REFLECTECTED CEILING PLAN
A-201 ELEVATIONS
A-301 SECTIONS
A-601 SCHEDULES
A-901 3D PERSPECTIVES
MECHANICAL
M-001 GENERAL NOTES AND SYMBOL LEGENDS
M-101 FIRST FLOOR - DEMOLITION PLANS
M-102 FIRST FLOOR - RENOVATION PLANS
M-401 DETAILS AND CONTROLS
MECHANICAL/ELECTRICAL
M-501 SCHEDULES
ELECTRICAL
E-001 GENERAL NOTES AND SYMBOL LEGENDS
E-101 ELECTRICAL DEMOLITION PLANS
E-102 LIGHTING RENOVATION PLAN
E-103 POWER & COMMUNICATIONS RENOVATION PLAN
E-104 SCHEDULES & DETAILS
FIRE PROTECTION
FP-001 GENERAL NOTES AND SYMBOL LEGENDS
FP-101 FIRE PROTECTION PLANS
END OF DOCUMENT
INSTRUCTIONS TO BIDDERS INS-1
INSTRUCTIONS TO BIDDERS
Project: ROBERT PURCELL COMMUNITY CENTER
MAIL CENTER RENOVATION
Owner: Cornell University
Ithaca, New York 14853
Architect: Cornell University
Facilities Engineering
201 Humphreys Service Building
Ithaca, New York 14853
1. PROPOSAL FORMS
a. Proposals shall be made only on the forms provided and all blank and underlined spaces in
the forms shall be fully filled in, in ink or typed; amount shall be fully stated both in writing and in figures.
Proposals shall be signed by Principals or Officers duly authorized to execute such documents on behalf of
their respective firms or organizations, and the Certificate included in the Bid Form shall be completed
accordingly. Bidder's legal name must be fully stated. Completed form shall be without interlineation,
alterations, or erasures unless initialed and dated by the signer.
2. RECAPITULATION OR PROPOSAL
a. Proposals shall not contain any recapitulation of the work to be done. No oral, telegraphic
or telephonic proposals or modifications will be considered.
3. METHOD OF SUBMISSION
a. Proposals shall be prepared and enclosed in a sealed envelope. Envelope shall be addressed
to:
Facilities Contracts
121 Humphreys Service Building
Cornell University
Ithaca, New York 14853
Proposal for: Robert Purcell Community Center
Mail Center Renovation
Submitted by:
(Bidder)
b. Proposals shall be delivered to the Owner at the address listed above not later than 2:00PM
on July 25, 2019.
INSTRUCTIONS TO BIDDERS INS-2
4. BID OPENING
a. Proposals will be opened publicly by the Owner in Room 133, Humphreys Service
Building, Cornell University Campus, Ithaca, New York, at the hour and date listed in 3b. The Owner
reserves the right to postpone the date and time of opening of proposals at any time prior to the date and
time announced in this Instruction to Bidders or amendments thereto.
5. BIDDING DOCUMENTS
a. The Bidding Documents will consist of the following:
(1) Instructions to Bidders.
(2) Bid Form.
(3) General Conditions of the Contract and Division 1 - "General Requirements".
(4) Drawings and Specifications.
(5) Addenda and/or bulletins issued prior to date of opening of Proposals.
6. DRAWINGS AND SPECIFICATIONS FURNISHED
a. Contract Documents may be obtained from the Facilities Contracts website
(http://finance.fs.cornell.edu/contracts/pob/projects.cfm ). For assistance, call 607-255-5343.
b. Printed sets of bid documents will be available at $30.00 per set without refund. No partial
sets will be issued. Electronic access to the bid documents including addendums may be obtained for a
non-refundable fee of $49.00 at the requestor’s option. All Contract Documents remain the property of the
Owner.
c. At the request of the successful bidder, Cornell will provide up to five (5) printed sets of
drawings and specifications.
7. START OF WORK
a. Work at the site shall be started on October 1, 2019 and shall be achieve substantial
completion of the project no later than January 3, 2020.
b. The construction schedule is critical. The Contractor shall provide adequate labor and
equipment in the Bid to ensure that no slippage of the schedule will occur.
8. BONDS
a. Performance and Payment Bonds. The successful Bidder shall furnish the Owner with
"Performance" and “Labor and Material Payment Bonds", each in the amount of 100% of the Contract
Price. The cost of such bonds shall be included in the Bidders Proposal. Each of these Bonds are to be in
a form with such sureties as the Owner may approve.
INSTRUCTIONS TO BIDDERS INS-3
b. Bid Bond. Each Bidder will be required to furnish a Bid Bond in the amount of 10% of
the Bid Amount. Such Bid Bond shall guarantee that the Bidder will execute the Contract if it is awarded
to him in conformity with his Proposal. Such Proposal Guarantee Bond shall include a statement that the
Insurer shall be willing to provide to the Bidder the Contract Bonds as described in 8a above.
9. AWARD OF CONTRACT
a. It is the intent of the Owner to enter into a Contract with one General Contractor for the
entire project. All labor, services, materials, supplies, etc. shall be provided in accordance with the
Contract.
b. Award of the Contract shall be made to the bidder submitting the lowest responsive and
responsible bid who, in the opinion of the Owner, is qualified to perform the work. The competence and
responsibility of the Bidders' proposed principal subcontractors will be considered in making the Award.
c. The Owner reserves the right to reject any or all Proposals, and to waive any informalities
in Bidding. Contract award shall be subject to approval of Cornell University’s Contractors Qualification
Statement.
d. All Proposals shall be irrevocable until contract award, unless the bid is withdrawn.
e. The Owner reserves the right to accept any of the Alternate Proposals listed within
THIRTY (30) calendar days following the award of a construction contract or such other time as may be
agreed to by the Owner and Contractor.
10. EXAMINATION OF SITE AND CONTRACT DOCUMENTS
a. Each Bidder shall visit the Site of the proposed work, fully acquaint and familiarize himself
with the conditions as they exist and the character of the operations to be carried on under the proposed
Contract, and make such investigation as he may see fit so that he shall fully understand the facilities,
physical conditions and restrictions attending the work under the Contract.
b. Each Bidder shall also thoroughly examine and become familiar with the Drawings,
Specifications and associated Bid Documents.
c. By submitting a Proposal, the Bidder covenants and affirms that he has carefully examined
the Drawings, Specifications, associated Bid Documents, the Addenda and Bulletins, if any, and the Site,
that he relies on no representation by the Owner, and that from his own investigation he has satisfied himself
as to the nature and location of the work, the general and local conditions, and all matters which may in any
way affect the work or its performance, and that as a result of such examination and investigation, he fully
understands the conditions of bidding and that he will not make any claim for, and waives any right to
damage because of misinterpretation or misunderstanding of the Bid Documents and the conditions of
bidding.
INSTRUCTIONS TO BIDDERS INS-4
11. DISCREPANCIES
a. Should a Bidder find discrepancies in or omissions from the Drawings, Specifications and
associated Bid Documents, or should he be in doubt as to their meaning, he shall at once notify the Architect,
who will send written instructions to all bidders. Neither the Owner nor the Architect will be responsible
for oral instructions. Every request for such interpretation should be in writing, addressed to the Architect.
Inquiries received by the deadline established at the pre-bid conference will be given consideration.
12. PRE-BID CONFERENCE
a. A pre-bid conference has been scheduled for 1:00PM, July 2, 2019, in Room 102C of the
Humphreys Service Building. The purpose of the conference will be to clarify the intent of the Contract
Documents if necessary. Results will be published in an Addendum.
13. TRADE SUBCONTRACTORS, MATERIAL SUPPLIERS
a. Each portion of the work shall be performed by an organization equipped and experienced
to do work in that particular field, and no portion of the work shall be reserved by the Bidder to himself
unless he is so equipped and experienced. Subcontracts shall be awarded only to parties satisfactory to the
Owner and the Architect. Each subcontractor and materials supplier shall be approved individually.
b. In the spaces provided in the Bid Form, the Bidder shall list all portions of the work he
proposes to perform directly with his own forces.
c. A list of names from which the Bidder proposes to select subcontractors, materials
suppliers, and/or manufacturers for the principal trades or subdivisions of the work is required as part of
the Proposal.
d. In the Bid Form, there has been listed the principal trades or subdivisions of the work for
which such a listing is required, together with the provisions which govern the listing, selection and
approval of principal subcontractors.
14. SCHEDULE OF VALUES
a. An abbreviated "Schedule of Values" for certain trades and/or subdivisions of the work is
required as part of the Bidder's Proposal in the Bid Form.
b. The successful Bidder shall submit a complete "Schedule of Values" showing the amounts
allocated to the various trades, suppliers, subcontractors, installers and General Contractor's work,
aggregating the total sum of the Contract. The complete "Schedule of Values" shall be submitted prior to
award of Contract.
15. ADDENDA AND BULLETINS
a. Addenda and/or bulletins issued during the bidding period shall be acknowledged in the
space provided in the Bid Form.
INSTRUCTIONS TO BIDDERS INS-5
16. SUBSTITUTIONS
a. Proposals shall conform to the requirements of the Bid Documents.
b. The Bidder may offer substitutions for any item of material or equipment, element of work,
or method of construction set forth in the Bid Documents, with the exception of Form of Contract, General
Conditions and General Requirements - Division 1, by listing the proposed substitutions and the amounts
to be deducted from the Base Bid corresponding to each such proposed substitution in the spaces provided
in the Bid Form. However, the Bidder is cautioned to make his base proposal on the materials and items
specified by name or other particular reference.
17. SUB-SURFACE CONDITIONS
a. Boring information, water levels, indications of sub-surface conditions and similar
information given on the Drawings or in the Specifications are furnished only for the convenience of the
Bidders. The Owner, Architect and Consulting Engineer make no representation regarding the character
and extent of the soil data or other sub-surface conditions to be encountered during the work and no
guarantee as to the accuracy or validity of interpretation of such data or conditions is made or intended.
b. Each Bidder shall, by careful examination, inform himself as to the nature and location of
the work, the conformation of the ground, subsoil and ground water conditions, the character, quality and
quantity of the materials to be encountered, the character of equipment and facilities needed preliminary to
and during the prosecution of the work, the general and local conditions and all other matters which can in
any way affect the work under this Contract. The Bidder may, at his option, conduct tests at his expense,
including borings, by prior notification to the Owner. Each Bidder shall make his own deductions of sub-
surface conditions which may affect methods or cost of construction of the work hereunder and he agrees
that, if awarded the construction contract, he will make no claim for damages or other compensation, except
such as are provided for in the Contract Documents, should he encounter conditions during the progress of
the work different from those as calculated and/or anticipated by him.
18. SALES AND USE TAX EXEMPTION
a. The Owner, Cornell University, a non-profit educational institution, is exempt from
payment of certain Sales and Use Taxes.
19. FEDERAL EXCISE TAX
a. The Owner, Cornell University, a non-profit educational institution, is exempt from
payment of certain Federal Excise Taxes.
20. TAX EXEMPT STATUS
a. Bidders shall inform all prospective subcontractors and suppliers from whom they expect
to obtain proposals or quotations of the tax-exempt status of the Owner as set forth above and request that
they reflect anticipated tax credits in their proposals or quotations.
INSTRUCTIONS TO BIDDERS INS-6
21. EXEMPTION CERTIFICATES
a. At the Contractor's request, following the award of a Contract, Contractor exempt purchase
certificates will be furnished by the Owner to the Contractor with respect to such tax exempt articles or
transactions as may be applicable under the Contract.
22. REQUIRED SUBMISSIONS
a. Provide with Bid Proposal:
(1) Acknowledgement of Addenda and/or Bulletins issued prior to bid opening
(2) Certificate as to Corporate Bidder
(3) List of Proposed Subcontractors
(4) Abbreviated Schedule of Values
(5) Alternate Proposals and Unit Prices
(6) Completion of Milestone Schedule, if applicable
(7) Bid Security
b. Within fourteen days after bid opening:
(1) MWBE Utilization Plan
(2) Contractor’s Affirmative Action Plan
(3) Contractor’s Qualification Statement, if requested
c. Execution of Contract:
(1) Insurance Certificate
(2) Performance Bond
(3) Labor and Material Payment Bond
(4) Schedule of Work (bar chart)
(5) Federal Tax Identification Number
END OF SECTION
BID FORM BF-1
ROBERT PURCELL COMMUNITY CENTER
MAIL CENTER RENOVATION
Cornell University, Ithaca, New York
BID FORM
Submitted by: Date
To: Facilities Contracts
121 Humphreys Service Building
Cornell University
Ithaca, New York 14853
Gentlemen:
The undersigned,
(Name of Bidder)
a
(Type of Firm, State of Incorporation, if applicable)
of
(Address)
having carefully examined the Instructions to Bidders, the "Conditions of the Contract" (General, Division
1 - "General Requirements"), and the Drawings, Specifications and associated Bid Documents dated
May 21, 2019 prepared by Cornell University, Facilities Engineering, 201 Humphreys Service Building,
Ithaca, New York 14853, as well as the premises and conditions affecting the work, proposes to furnish all
material, equipment, labor, plant, machinery, tools, supplies, services, applicable taxes and specified
insurance necessary to perform the entire work, as set forth in, and in accordance with the said documents
for the following considerations:
1. BASE BID
a. All work complete, for the sum of
($ )
for MATERIALS, SUPPLIES, LABOR, and
SERVICES AND ALL OTHER COSTS.
BID FORM BF-2
2. ALTERNATE PROPOSAL
a. The undersigned, if awarded the Contract, proposes to perform work in addition to or in
place of the scope of the work shown and specified herein as associated with the Base Bid in accordance
with the following Alternate Proposals, which amounts are to be added or deducted to the amount of the
Base Bid as indicated for the Alternates specified in Division 1 of the Specifications.
b. If the Bidder desires to indicate that the acceptance of any Alternate or Alternates will
result in neither an addition to nor a deduction from the value of the work, he shall enter the phrase "No
Change" in response to such Alternate or Alternates.
c. It is understood that the Owner reserves the right to accept or reject any or the Owner and
Contractor may agree to all of the following Alternate Proposals within thirty (30) calendar days following
the award of a construction contract or such other time as.
Alternate No. Description
ADD DEDUCT
NONE $ $
3. MINORITY AND WOMEN’S BUSINESS ENTERPRISES (M/WBEs)
a. The undersigned shall, if awarded the Contract, endeavor to include both Minority and
Women Owned Business Enterprises participation and to demonstrate a “good faith effort” with respect to
these requirements. Goals shall be as follows:
• A goal of 3.7% for Minority-Owned Business Enterprise participation shall be applied as
follows: a maximum of one-third (1/3) of the goal may be applied to purchases of materials,
supplies, and equipment from MBEs.
• A goal of 3.3% for Women-Owned Business Enterprise participation shall be applied as
follows: a maximum of one-third (1/3) of the goal may be applied to purchases of materials,
supplies, and equipment from WBEs.
BID FORM BF-3
4. START OF WORK AND TIME FOR COMPLETION
a. The undersigned agrees, if awarded the Contract, to commence work at the site on
October 1, 2019 and to achieve substantial completion of the project no later than January 3, 2020.
b. The construction schedule is critical. The Contractor shall provide adequate labor and
equipment in the Bid to ensure that no slippage of the schedule will occur.
5. LIST OF PROPOSED PRINCIPAL SUBCONTRACTORS
a. The undersigned agrees, if awarded the Contract, to employ subcontractors from the
following list for the Sections or Subdivisions of work stated below subject to the following provisions:
(1) The Owner and Architect reserve the right to review the list of "Proposed Principal
Subcontractors" prior to the award of the Contract, and to delete from it the name or names of any to whom
they may have a reasonable objection. The Contractor may make the final selection of principal
subcontractors at his option from the resulting list after the award of the Contract.
b. Bidder shall list the names of at least one subcontractor for each Section or Subdivision of
the work listed below and shall limit the listing for each such Section or Subdivision to THREE (3) names.
c. If Bidder does not propose to employ a Subcontractor for any Section or Subdivision of
the work listed below, he shall enter the name of his firm for each such Section or Subdivision.
ELECTRICAL
MECHANICAL / PLUMBING
FIRE PROTECTION
BID FORM BF-4
PAINTING / FINISHES
____________________
____________________
____________________
____________________
____________________
____________________
BID FORM BF-5
6. PRINCIPAL SUBDIVISIONS OR ELEMENTS OF THE WORK TO BE PERFORMED
BY GENERAL CONTRACTOR'S FORCES
a. If awarded a Contract, we will perform the following portions of the Work with forces
directly employed by the undersigned:
b. If awarded a Contract, the Contractor’s main Project Manager will be:
(include resume with bid)
The Owner reserves the right to reject the names of any to whom they have a reasonable objection.
c. If awarded a Contract, the Contractor’s main Superintendent will be:
(include resume with bid)
The Owner reserves the right to reject the names of any to whom they have a reasonable objection.
7. TIME PROGRESS SCHEDULE
a. The undersigned agrees, if awarded the Contract, to furnish a "Construction Progress
Schedule" showing the starting and completion dates for all principal trades and subdivisions of the Work,
together with such additional information related thereto as may reasonably be required. Such schedule
shall be in conformance with General Requirements, Section 01 32 15, 1.3, A.
8. BONDS
a. Performance and Payment Bonds. The undersigned agrees, if awarded the Contract to
execute and deliver to the Owner "Performance" and "Labor and Material Payment Bonds" in such form as
acceptable to the Owner and in an amount equal to 100% of the Contract Sum. Such bonds will be furnished
by
(Name of Surety)
b. Bonding Rate for Change Orders. %
c. Bid Bond. A Bid Bond in the amount of $______________________ (10% of Bid
Amount) is attached to this Bid.
BID FORM BF-6
9. SCHEDULE OF VALUES
a. The undersigned agrees, prior to the award of a construction contract and upon the request
of the Architect or Owner, to submit a complete, itemized and detailed "Schedule of Values" including
Alternates elected, if any, showing the amount allocated to the various trades and subdivisions of the work,
aggregating the total Contract Sum.
b. To facilitate the evaluation of Bids, the undersigned has included in each part of his Bid
the following values for the trades and/or subdivisions of the work as listed below. Values for work
included under Alternate Proposals and to General Contractor's costs for General Conditions shall be
excluded.
Spec
Section Trades and/or Subdivision Value Included in Base Bid
Division 1 General Requirements
Division 2 Existing Conditions
Division 6 Wood, Plastics and Composites
Division 7 Thermal and Moisture Protection
Division 8 Openings
Division 9 Finishes
Division 10 Specialties
Division 21 Fire Suppression
Division 22 Plumbing
Division 23 HVAC
Division 26 Electrical
Division 27 Communications
Division 28 Electronic Safety and Security
Total Bid $
BID FORM BF-7
10. SUBSTITUTIONS
a. The Base Bid is predicated on compliance with the Drawings and Specifications without
substitutions.
b. The Bidder may offer substitutions for any item noted in the Specifications, with the
exception of Form of Contract, General Conditions and General Requirements - Division 1, by listing in
the space below the proposed substitution, together with the amount to be deducted from the Base Bid if
the substitution is accepted.
c. The Owner reserves the right to accept or reject any proposed substitution.
d. The sum stated includes any modifications of work or additional work that may be required
by reason of acceptance of substitution. Substitute materials must be approved and accepted by the Owner
in writing before same may be used in lieu of those named in the Specifications.
Item and Specification
Description of Reference Deduction from Base Bid
Substitution Section & Page No. Labor Material
BID FORM BF-8
11. ACCEPTANCE
a. The undersigned agrees that this Proposal shall be irrevocable until contract award, unless
the bid is withdrawn. It is understood and agreed that the Owner reserves the right to reject any or all
proposals, to waive any informalities in bidding process.
b. If written notice of acceptance of this Proposal is mailed, telegraphed or delivered to the
undersigned within sixty (60) calendar days after the date of opening of Bids, or any time thereafter before
this Proposal is withdrawn, the undersigned will within ten (10) calendar days after the date of such mailing,
telegraphing or delivery of such notice, execute an Agreement between Contractor and Owner, amended
and/or supplemented, if required, in accordance with the Proposal as accepted.
c. The undersigned further agrees to furnish Performance and Payment Bonds pursuant to
Section 7 herein upon execution of Agreement in e-Builder.
d. It is understood and agreed that the Owner reserves the right to accept any of the Alternate
Proposals listed within thirty (30) calendar days following the award of a construction contract or such
other time as may be agreed to by the Owner and Contractor.
e. It is understood and agreed that award of the Contract shall be made to the bidder
submitting the lowest responsive and responsible bid who, in the opinion of the Owner, is qualified to
perform the work.
BID FORM BF-9
12. ADDENDUM RECEIPT
a. Receipt of the following addenda to the Terms and Conditions, Drawings or Specifications
is acknowledged:
Addendum No. Dated:
Addendum No. Dated:
Addendum No. Dated:
Addendum No. Dated:
Addendum No. Dated:
Addendum No. Dated:
Addendum No. Dated:
Addendum No. Dated:
(Bidder)
By:
Title:
Business Address:
Dated:
BID FORM BF-10
CERTIFICATE OF NON-COLLUSION
By submission of this bid, each bidder and each person signing on behalf of any bidder certifies, and in the
case of a joint bid each party thereto certifies as to its own organization, under penalty of perjury, that to
the best of his knowledge and belief:
a. The prices in this bid have been arrived at independently without collusion, consultation,
communication, or agreement, for the purpose of restricting competition, as to any matter relating to such
prices with any other bidder or with any competitor.
b. Unless required by law, the prices that have been quoted in this bid have not been
knowingly disclosed by the bidder and will not knowingly be disclosed by the bidder prior to opening,
directly or indirectly, to any other bidder or with any competitor.
c. No attempt has been made or will be made by the bidder to induce any other persons,
partnership, or corporation to submit or not submit a bid for the purpose of restricting competition.
(Bidder)
By:
Title:
Dated:
BID FORM BF-11
CERTIFICATE AS TO CORPORATE BIDDER
I, _____________________________________________________, certify that I am the
_____________________________ of the Corporation named as Bidder within this Bid Form for General
Contractors; that __________________________________, who signed said Bid Form on behalf of the
bidder was then _______________________________ of said Corporation; that I know his signature; that
his signature thereto is genuine and that said Bid Form and attachments thereto were duly signed, sealed
and executed for and in behalf of said Corporation by authority of its governing body.
(Secretary-Clerk)
(CORPORATE SEAL)
Dated:
BID FORM BF-12
MILESTONE SCHEDULE
CORNELL UNIVERSITY
PROJECT TITLE
OWNER'S
EARLIEST
START
CONTRACTOR'S
SCHEDULED
START
OWNER'S
LATEST
FINISH
CONTRACTOR'S
SCHEDULED
FINISH
Contract Award August 1, 2019 ----- ----- -----
Start Construction October 1, 2019 ----- -----
Construction Complete ----- ----- January 3, 2020
Notes:
1. The Contractor shall complete this schedule and submit with the bid.
Rev 12.2018
G E N E R A L C O N D I T I O N S
FOR
ROBERT PURCELL COMMUNITY CENTER
MAIL CENTER RENOVATION
CORNELL UNIVERSITY
ITHACA, NEW YORK
i Rev 12.2018
GENERAL CONDITIONS
TABLE OF CONTENTS
Page
ARTICLE 1 INTERPRETATION OF CONTRACT DOCUMENTS
Section 1.01 Owner 1
Section 1.02 Meaning and Intent of Specifications, Plans
and Drawings 1
Section 1.03 Order of Precedence 1
ARTICLE 2 CONTRACTOR
Section 2.01 Contractor's Obligations 2
Section 2.02 Contractor's Title to Materials 2
Section 2.03 "Or Equal" Clause 2
Section 2.04 Quality, Quantity and Labeling 3
Section 2.05 Superintendence by Contractor 3
Section 2.06 Subsurface or Site Conditions 4
Section 2.07 Representations of Contractor 4
Section 2.08 Verifying Dimensions and Site Conditions 4
Section 2.09 Copies of Contract Documents for Contractors 5
Section 2.10 Meetings 5
Section 2.11 Related Work 5
Section 2.12 Surveys and Layout 5
Section 2.13 Errors, Omissions or Discrepancies 5
Section 2.14 Project Labor Rates 6
Section 2.15 Daily Reports 6
ARTICLE 3 INSPECTION AND ACCEPTANCE
Section 3.01 Access to the Work 6
Section 3.02 Notice for Testing 6
Section 3.03 Inspection of Work 7
Section 3.04 Inspection and Testing 7
Section 3.05 Defective or Damaged Work 7
Section 3.06 Acceptance 7
ARTICLE 4 CHANGES IN WORK
Section 4.01 Changes 8
Section 4.02 Claims for Extra Work 11
Section 4.03 Form of Change Orders 12
ARTICLE 5 TIME OF COMPLETION
Section 5.01 Time of Completion 12
ii Rev 12.2018
TABLE OF CONTENTS
Page
ARTICLE 6 TERMINATION
Section 6.01 Termination for Cause 13
Section 6.02 Termination for Convenience of Owner 13
Section 6.03 Owner's Right to do Work 13
ARTICLE 7 DISPUTES
Section 7.01 Disputes Procedure 14
ARTICLE 8 SUBCONTRACTS
Section 8.01 Subcontracting 15
ARTICLE 9 COORDINATION AND COOPERATION
Section 9.01 Cooperation with Other Contractors 15
ARTICLE 10 PROTECTION OF RIGHTS, PERSONS AND PROPERTY
Section 10.01 Accidents and Accident Prevention 16
Section 10.02 Adjoining Property 17
Section 10.03 Emergencies 17
Section 10.04 Bonds 17
Section 10.05 Risks Assumed by the Contractor 18
Section 10.06 Contractor's Compensation and Liability Insurance 18
Section 10.07 Liability Insurance of the Owner 20
Section 10.08 Owner's and Contractor's Responsibilities for
Fire and Extended Coverage Insurance Hazards 20
Section 10.09 Effect of Procurement of Insurance 21
Section 10.10 No Third Party Rights 21
ARTICLE 11 USE OR OCCUPANCY PRIOR TO ACCEPTANCE BY OWNER
Section 11.01 Substantial Completion 21
Section 11.02 Occupancy Prior to Acceptance 21
ARTICLE 12 PAYMENT
Section 12.01 Provision of Payment 22
Section 12.02 Stored Materials & Equipment 23
Section 12.03 Retention 24
Section 12.04 Withholding Payments 24
Section 12.05 Documents and Conditions Precedent to Final Payment 25
Section 12.06 Final Payment and Release 26
iii Rev 12.2018
TABLE OF CONTENTS
Page
ARTICLE 13 TAX EXEMPTION
Section 13.01 Tax Exemption 26
ARTICLE 14 GUARANTEE
Section 14.01 Guarantee 27
ARTICLE 15 STANDARD PROVISIONS
Section 15.01 Provisions Required by Law Deemed Inserted 27
Section 15.02 Laws Governing the Contract 27
Section 15.03 Assignments 27
Section 15.04 No Third Party Rights 28
Section 15.05 Waiver of Rights of Owner 28
Section 15.06 Limitation on Actions 28
Section 15.07 Owner's Representative 28
ARTICLE 16 MINORITY AND WOMEN BUSINESS ENTERPRISES
Section 16.01 Definitions 28
Section 16.02 Participation by Minority and Women
Business Enterprises 28
Section 16.03 MWBE Utilization Plan 29
Section 16.04 Reports and Records 29
ARTICLE 17 ACCOUNTING, INSPECTION AND AUDIT 30
ARTICLE 18 CONTRACTOR PERFORMANCE EVALUATION 30
ARTICLE 19 ROYALTIES AND PATENTS 30
ARTICLE 20 CONFIDENTIALITY AND USE OF OWNER'S NAME
Section 20.01 Release of Information 31
Section 20.02 Confidential Information 31
Section 20.03 Use of Owner's Name 31
ARTICLE 21 CORNELL UNIVERSITY STANDARDS OF
ETHICAL CONDUCT 32
iv Rev 12.2018
EXHIBITS
A Change Order Documentation Instructions
Construction Contract Change Order Request
Construction Contract Change Order Summary
B Final Release
C Guarantee
D Form I MWBE Utilization Plan
Form II Contractor’s Affirmative Action Plan
Form III Affirmative Action Workforce Report
E Labor Rate Breakdown
F Stored Materials Invoicing Documentation
G Contractor Performance Evaluation
1 Rev 12.2018
ARTICLE 1 -- INTERPRETATION OF CONTRACT DOCUMENTS
Section 1.01 - Owner
A. The Owner is Cornell University as identified in the Agreement and referred to
throughout the Contract Documents as the "Owner" or "Cornell University".
B. Ownership of Documents: All drawings, specifications, computations, sketches, test
data, survey results, photographs, renderings and other material relating to the Work, whether furnished
to or prepared by the Contractor, are the property of Cornell University. The Contractor shall use such
materials or information therefrom only in connection with the Work of this Contract. When requested,
the Contractor shall deliver such materials to Cornell University.
C. The Owner shall give all orders and directions contemplated under the Contract relative
to the execution of the Work. The Owner shall determine the amount, quality, acceptability, and fitness
of the Work and shall decide all questions which may arise in relation to said Work. The Owner's
estimates and decisions shall be final except as otherwise expressly provided.
D. Any differences or conflicts concerning performance which may arise between the
Contractor and other Contractors performing Work for the Owner shall be adjusted and determined by
the Owner.
E. The table of contents, titles, captions, headings, running headlines, and marginal notes
contained herein and in said documents is intended to facilitate reference to various provisions of the
Contract Documents and in no way affect the interpretation of the provisions to which they refer.
Section 1.02 - Meaning and Intent of Specifications, Plans and Drawings
The meaning and intent of all specifications, plans and drawings shall be determined in a
manner approved by the Owner.
Section 1.03 - Order of Precedence
A. Should a conflict occur in or between or among any parts of the Contract Documents
that are entitled to equal preference, the more expensive way of doing the Work, the better quality or
greater quantity of material shall govern, unless the Owner otherwise so directs in writing.
B. Drawings and specifications are reciprocal. Anything shown on the plans and not
mentioned in the specifications, or mentioned in the specifications and not shown on the plans, shall
have the same effect as if shown or mentioned in both.
C. Requirements of reference standards form a part of these specifications to the extent
indicated by the reference thereto. When provisions of reference standards conflict with provisions in
these specifications, the specifications shall govern.
2 Rev 12.2018
ARTICLE 2 -- CONTRACTOR
Section 2.01 - Contractor's Obligations
A. The Contractor shall, in good workmanlike manner, perform all the Work required by
the Contract within the time specified in the Contract. The Contractor shall comply with all terms of
the Contract, and shall do, carry on, and complete the entire Work to the satisfaction of the Owner.
1. All labor for this project which is normally under the jurisdiction of one of the local
unions as covered in the contract between the Tompkins-Cortland Building Trades
Council, Maintenance Division and Cornell University shall be performed by Union
labor.
B. The Contractor shall furnish, erect, maintain, and remove such construction plant and
such temporary Work as may be required.
C. The Contractor shall provide and pay for all labor, material, tools, equipment,
machinery, as well as utility connections, transportation, and all other facilities and services necessary
for the proper execution and completion of the Work, except as otherwise specified elsewhere in the
Contract Documents.
D. Whenever a provision of the Specifications conflicts with agreements or regulations in
force among members of trade associations, unions, or councils which regulate or distinguish what
work shall or shall not be included in the work of a particular trade, the Contractor shall make all
necessary arrangements to reconcile such conflict without delay, damage, or cost to the Owner and
without recourse to the Architect or the Owner. In case progress of the Work is affected by undue delay
in furnishing or installing items of material or equipment required under the Contract because of a
conflict involving such agreement or regulations, the Owner or the Architect may require that other
material or equipment of equal kind and quality be provided at no additional cost to the Owner.
Section 2.02 - Contractor's Title to Materials
A. The Contractor warrants that the Contractor has full, good and clear title to all materials
and supplies used by the Contractor in the Work, free from all liens, claims or encumbrances.
B. All materials, equipment and articles which become the property of the Owner shall be
new unless specifically stated otherwise.
Section 2.03 - "Or Equal" Clause
A. Whenever a material, article or piece of equipment or method is identified on the plans
or in the specifications by reference to manufacturers' or vendors' names, trade name, catalogue number,
or make, no others may be substituted. Any and all other "Or Equal" considerations will be handled
under this Section in accordance with General Requirements, Section 01 25 00.
3 Rev 12.2018
B. Where the Architect approves a product proposed by the Contractor and said proposed
product requires a revision or redesign of any part of the Work covered by this Contract, or the Work
covered by other contracts, all said revision or redesign, and all new drawings and details required
therefor shall be provided by the Contractor and shall be approved by the Architect. All time spent by
the Architect or its agents to evaluate the proposed substitution and or necessary engineering cost to
accommodate the requested change shall be reimbursed to the Owner by the Contractor via the Change
Order procedure.
Section 2.04 - Quality, Quantity and Labeling
A. The Contractor shall furnish materials and equipment of the quality and quantity
specified in the Contract. Unless otherwise provided, all materials and articles incorporated into the
work shall be new and of the most suitable grade of their respective kinds for the purpose. When
required by the Contract Documents or when directed by the Owner, the Contractor shall supply the
Owner's Representative, for their acceptance, full information concerning any material which the
Contractor contemplates incorporating into the work. Materials and articles installed or used without
such acceptance shall be at the risk of subsequent rejection.
B. When materials are specified to conform to any standard, the Owner may require that
the materials delivered to the Site shall bear manufacturer's labels stating that the materials meet said
standards.
C. The above requirements shall not restrict or affect the Owner's right to test materials
as provided in the Contract.
D. Whenever several alternative materials or items are specified by name or other
particular reference for one use, the Owner's Representative may require the Contractor to submit in
writing a list of the particular materials or items the Contractor intends to use before the Contract is
executed.
Section 2.05 - Superintendence by Contractor
A. The Contractor shall employ a full-time effective, responsive and competent
construction superintendent and necessary staff; the construction superintendent shall devote full time
to the Work and shall have full authority to act for the Contractor at all times. The Contractor shall
provide the Owner with the names and authority of such personnel in writing.
B. If at any time the superintendent is not satisfactory to the Owner, the Contractor shall,
if requested by the Owner, replace said superintendent with another superintendent satisfactory to the
Owner. There shall be no change in superintendent without the Owner's approval.
C. The Contractor shall remove from the Work any employee of the Contractor or of any
Subcontractor when so directed by the Owner.
4 Rev 12.2018
Section 2.06 - Subsurface or Site Conditions
A. The Contractor acknowledges that it has assumed the risk and that the contract
consideration includes such provision as the Contractor deems proper for all subsurface conditions as
the Contractor could reasonably anticipate encountering from the provisions of the Contract
Documents, borings, rock cores, topographical maps and such other information as the Owner made
available to the Contractor or from their own inspection and examination of the site prior to the Owner's
receipt of bids.
B. In the event that the Contractor encounters subsurface physical conditions at the site
differing substantially from those shown on or described or indicated in the Contract Documents and
which could not have been reasonably anticipated from the aforesaid information made available by
the Owner or from the Contractor's aforesaid inspection and examination of the site, the Contractor
shall give immediate notice to the Owner of such conditions before they are disturbed. Such notice
shall include probable cost and/or any impact to the schedule. The Owner will thereupon promptly
investigate the conditions and if Owner finds that they do substantially differ from that which should
have been reasonably anticipated by the Contractor, the Owner shall make such changes in the drawings
and specifications as may be necessary and a change order shall be issued.
Section 2.07 - Representations of Contractor
The Contractor represents and warrants:
A. That the Contractor is financially solvent and is experienced in and competent to
perform the Work;
B. That the Contractor is familiar with all Federal, State, or other laws, ordinances, orders,
building codes, rules and regulations, which may in any way affect the Work;
C. That any temporary and permanent Work required by the Contract can be safely and
satisfactorily constructed.
D. That the Contractor has carefully examined the Contract and the Site of the Work and
that, from the Contractor's own investigations is satisfied as to the nature and location of the Work, the
character, quality and quantity of surface and subsurface materials likely to be encountered, the
character of equipment and other facilities needed for the performance of the Work, the general and
local conditions, and all other materials or items which may affect the Work. The Contractor has
correlated those observations with the requirements of the Contract Documents and has made all other
investigations essential to a full understanding of the Work and the difficulties which may be
encountered in performing the Work.
Section 2.08 - Verifying Dimensions and Site Conditions
A. The Contractor shall take all measurements at the Site and shall verify all dimensions
and site conditions at the Site before proceeding with the Work. If said dimensions or conditions are
found to be in conflict with the Contract, the Contractor immediately shall refer said conflict to the
Owner.
B. During the progress of Work, the Contractor shall verify all field measurements prior
to fabrication of building components and equipment, and proceed with the fabrication to meet field
conditions.
5 Rev 12.2018
C. The Contractor shall consult all Contract Documents to determine exact location of all
Work and verify spatial relationships of all Work. Any question concerning said location or spatial
relationships shall be submitted in a manner approved by the Owner.
D. Specific locations for equipment, pipelines, ductwork and other such items of Work,
where not dimensioned on plans, shall be determined in consultation with the Owner and other affected
Contractors and Subcontractors.
E. The Contractor shall be responsible for the proper fitting of the Work in place.
F. Should failure of the Contractor to perform services under this section result in
additional costs to the Owner, the Contractor shall be responsible for such additional costs.
Section 2.09 - Copies of Contract Documents for Contractors
A. The Owner shall furnish to the Contractor, without charge, up to five (5) sets of
Contracts Documents and one (1) set of reproducible sepias.
B. Any sets in excess of the number mentioned above may be furnished to the Contractor
at the cost of reproduction and mailing.
C. All drawings, specifications, and copies thereof furnished by the Owner are the
property of the Owner. They are not to be used on other work, and with the exception of the signed
Contract Set, are to be returned to the Owner on request at the completion of the work.
Section 2.10 - Meetings
The Contractor and all subcontractors as requested shall attend all meetings as directed by the
Owner or the Owner's Representative.
Section 2.11 - Related Work
The Contractor shall examine the Contract for related work to ascertain the relationship of said
work to the Work under the Contract.
Section 2.12 - Surveys and Layout
Unless otherwise expressly provided in the Contract, the Owner shall furnish the Contractor all
surveys of the property necessary for the Work, but the Contractor shall lay out the Work.
Section 2.13 - Errors, Omissions or Discrepancies
The Contractor shall examine the Contract thoroughly before commencing the Work and report
in writing any errors or discrepancies to the Owner or the Owner's Representative.
6 Rev 12.2018
Section 2.14 - Project Labor Rates
The Contractor shall submit to the Owner, for review and approval, within thirty (30) days after
Contract is awarded all trade labor rates inclusive of fringe benefits, taxes, insurance for the duration
of the individual craft agreement in accordance with Exhibit G. Revised rates shall be provided within
thirty (30) days of signing any new agreements with the individual crafts during this project.
Section 2.15 – Daily Reports
The Contractor's Construction Superintendent shall submit a Daily Report to the Cornell
University Project Manager or the Resident Field Engineer at the job site. Such reports shall, at a
minimum, contain the following information:
Name of Project
Project Number
Date of Report
Weather Conditions
Equipment on the site
Contractors on site including name and number of employees on site for each contractor
Work/area and activity for each contractor
Overtime worked and planned work progress
Environmental problems and corrections
Other information, such as special events, occurrences, materials delivered, accidents or
injuries, recommendations, suggestions, visitors, inspections, equipment start-up and
check out, occupancy, etc.
ARTICLE 3 -- INSPECTION AND ACCEPTANCE
Section 3.01 - Access to the Work
The Owner and Architect, or their duly authorized representatives, assistants, or inspectors
shall at all times and for any purpose have access to the work and the premises used by the Contractor,
and the Contractor shall provide safe and proper facilities therefor. In addition, the Contractor shall,
whenever so requested, give the Owner and Architect or their duly authorized representatives access to
the proper invoices, bills of lading, specifications, etc., which may be required in determining the
adequacy and/or quantity of materials used in completion of the work.
Section 3.02 - Notice for Testing
If the Contract Documents, laws, ordinances, rules, regulations, or orders of any public
authority having jurisdiction require any work to be inspected, tested, accepted, or approved, the
Contractor shall give the Owner timely notice of its readiness and of the date arranged so the Owner
may observe such inspection, testing, or approval. The Contractor shall bear all costs of such
inspection, tests, and approvals unless otherwise provided.
7 Rev 12.2018
Section 3.03 - Inspection of Work
A. The Contractor will cooperate in all ways to facilitate the inspection and examination
of the work. The inspections and examinations will be carried out in such a manner that the work will
not be delayed.
B. All Work, all materials whether or not incorporated in the Work, all processes of
manufacturer, and all methods of construction shall be, at all times and places, subject to the inspection
of the Owner and the Owner shall be the final judge of the quality and suitability of the Work. Any
Work not approved by the Owner shall immediately be reconstructed, made good, replaced or corrected
by the Contractor including all Work of other Contractors destroyed or damaged by said removal or
replacement.
C. Required certificates of inspection, testing, acceptance, or approval shall be secured by
the Contractor and promptly delivered to the Owner.
Section 3.04 - Inspection and Testing
All materials and equipment used in the Work shall be subject to inspection and testing in
accordance with accepted standards to establish conformance with specifications and suitability for
uses intended, unless otherwise specified in the Contract. If any Work shall be covered or concealed
without the approval or consent of the Owner, said Work shall, if required by the Owner, be uncovered
for examination. If any test results are below specified minimums, the Owner may order additional
testing. The cost of said additional testing, any additional professional services required, and any other
expenses incurred by the Owner as a result of said additional testing shall be paid by the Contractor.
Reexamination of any part of the Work may be ordered by the Owner, and if so ordered the Work must
be uncovered by the Contractor. If said Work is found to be in accordance with the Contract, the Owner
shall pay the cost of reexamination and replacement. If said Work is found not to be in accordance
with the Contract, the Contractor shall pay the cost of reexamination and replacement.
Section 3.05 - Defective or Damaged Work
If, in the opinion of the Owner, it is undesirable to replace any defective or damaged materials
or to reconstruct or correct any portion of the Work injured or not performed in accordance with the
Contract, the compensation to be paid to the Contractor shall be reduced by an amount which, in the
judgment of the Owner, shall be deemed to be equitable.
Section 3.06 - Acceptance
No previous inspection shall relieve the Contractor of the obligation to perform the Work in
accordance with the Contract. No payment, either partial or full, by the Owner to the Contractor shall
excuse any failure by the Contractor to comply fully with the Contract Documents. The Contractor
shall remedy all defects, paying the cost of any damage to other Work resulting therefrom.
8 Rev 12.2018
ARTICLE 4 -- CHANGES IN WORK
Section 4.01 - Changes
A. The Owner, without invalidating the Contract, may order changes within the general
scope of the Contract and the Contractor shall promptly comply with such change orders.
B. A change order is a written direction to the Contractor signed by the Owner, issued
after execution of the Contract, authorizing a change in the Work, extra work, or an adjustment in the
Contract price or time of performance.
C. No claims for changes, extra work or additional time to complete the Contract or an
adjustment in the Contract price shall be allowed unless such change is ordered in writing by the Owner.
D. The Owner shall determine the amount by which the Contract consideration is to be
increased or decreased by a change order by one (1) or more of the following methods:
1. By agreement with the Contractor.
2. By applying the applicable price or prices previously bid and approved.
(i) To the extent that Unit Prices are applicable, as determined by the Owner,
work shall be priced and paid for or credited in accordance with such Unit
Prices; except that a Unit Price shall not apply to any portion of work
which is either reduced or increased by more than 25%. Said Unit Prices
shall be valid for the duration of the project as applicable, unless stipulated
elsewhere in the Contract Documents.
(ii) For Unit Price items, additions and deletion of like items shall be
algebraically summed and then multiplied by the applicable Unit Prices.
For Direct Labor and Material items, all additions and deletions shall be
algebraically summed for each subcontractor and then multiplied by the
applicable markup.
(iii) Unit Prices are for work complete, measured in place and cover profit and
all other costs and expenses. Unit Prices include, without limit, all
conditions of the contract and all general requirements such as layout,
reproduction of Drawings and Specifications, testing and inspection, shop
drawing and sample coordination, supervision (field and home office),
small tools and expendable items, insurance, taxes, temporary facilities
and services, including access and safety, "as-built" drawings, and general
and administrative overhead and profit.
9 Rev 12.2018
3. By estimating the fair and reasonable cost of:
(i) Labor, including all wages, required wage supplements and insurance
required by law paid to employees below the rank of superintendent
directly employed at the Site.
(ii) Materials
(iii) Equipment, excluding hand tools, which in the judgment of the Owner,
would have been or will be employed exclusively and directly on the
Work. When submitting change orders, equipment which is common to
the project scope at hand is expected to be previously paid for as overhead
/ general conditions to the project. Special rental equipment or tools not
common to the project that are required to perform the change order will
be accepted as additional costs.
4. By determining the actual cost of the extra work in the same manner as in
Subsection 3 except the actual costs of the Contractor shall be used in lieu of
estimated costs.
E. Mark-up Percentages
1. Work performed by the Contractor: Where the Work is performed directly by
the Contractor by adding to the total of such estimated costs a sum equal to
fifteen percent (15%) thereof.
2. Work performed by a Subcontractor: Where the change order work is performed
by a Subcontractor under contract with the Contractor, by adding a sum equal to
fifteen (15%) of said costs for the benefit of said Subcontractor, and by adding
for the benefit of the Contractor an additional sum equal to ten percent (10%) of
said costs.
3. Work performed by a Sub-Subcontractor: Where work is performed by a Sub-
Subcontractor, by adding the sum equal to fifteen percent (15%) of said costs for
the benefit of said Sub-Subcontractor, by adding for the benefit of the
Subcontractor an additional sum equal to five percent (5%) of said cost and by
adding for the benefit of the Contractor an additional sum equal to five percent
(5%) of said cost. The maximum aggregate of all mark-up percentages may not
exceed twenty five percent (25%).
4. No Markup on Bonds and Insurance Costs: Change Order cost adjustments due
to increases or decreases in bond or insurance costs (if applicable) shall not be
subject to any Markup Percentage.
5. Overtime Pay: No mark-up shall be paid on the premium portion of overtime
pay.
10 Rev 12.2018
6. Direct and Indirect Costs Covered by Markup Percentages: As a further
clarification, the agreed upon Markup Percentage is intended to cover the
Contractor's profit and all indirect costs and expenses associated with the change
order work. Items intended to be covered by the Markup Percentage include,
without limit: home office expenses, branch office and field office overhead
expense of any kind; project management; superintendents, general foremen;
estimating, engineering; coordinating; expediting; purchasing; detailing; legal,
accounting, data processing or other administrative expenses; reproduction of
drawings and specifications; shop drawings and sample coordination; “as-built”
drawings; permits; auto insurance and umbrella insurance; pick-up truck costs;
parking permits; cellular phones; testing and inspection; temporary facilities;
access and safety provisions; and warranty expense costs. The cost for the use
of small tools and/or tools already in use on site are also to be considered covered
by the Markup Percentage. Small tools shall be defined as tools and equipment
(power or non-power) with an individual purchase cost of less than $750
7. Deduct Change Orders and Net Deduct Changes: The application of the markup
percentage will apply to both additive and deductive change orders. In the case
of a deductive change order, the credit will be computed by applying the
percentage so that a deductive change order would be computed in the same
manner as an additive change order. In those instances where a change involves
both additive and deductive work, the additions and deductions will be netted
and the markup percentage adjustments will be applied to the net amount
F. Regardless of the method used by the Owner in determining the value of a change
order, the Contractor, within thirty (30) calendar days after a request for the estimate of value shall
submit to the Owner a detailed breakdown of the Contractor's estimate, including all subcontractors
details, of the value of the Change Order Work, in the format detailed in Exhibit
A. Each submission shall include an electronic .pdf format of all documentation.
G. Unless otherwise specifically provided for in a change order, the compensation
specified therein includes a full payment for both the Work covered by the order and for any damage
or expense incurred by the Contractor by any delays, including any delays to other Work to be done
under the Contract resulting from said change order. The Contractor waives all rights to any other
compensation for said damage or expense.
H. The Contractor shall furnish satisfactory bills, payrolls and vouchers covering all items
of cost and when requested by the Owner shall give the Owner access to accounts and records relating
thereto.
11 Rev 12.2018
Section 4.02 – Claims for Extra Work
If the Contractor claims (i) that any work it has been ordered to do is extra work or (ii) that it
has performed or is going to perform extra work or (iii) that any action or omission of the Owner or the
Architect is contrary to the terms and provisions of the Contract, the Contractor shall:
A. Promptly comply with such order;
B. Notwithstanding the provisions of this Agreement, Article 4 of these General
Condition and any other provisions of the Contract documents to the contrary, file with the Owner,
within fourteen (14) calendar days after being ordered to perform the work claimed by it to be extra
work or within fourteen (14) calendar days after commencing performance of the extra work, whichever
date shall be the earlier, or within fourteen (14) calendar days after the said action or omission on the
part of the Owner or the Architect occurred, a written notice of the basis of its claim and request a
determination thereof;
C. Notwithstanding the provisions of this Agreement and any other provisions of the
Contract documents to the contrary, file with the Owner, within thirty (30) calendar days after said
alleged extra work was required to be performed or said alleged extra work was commenced, whichever
date shall be the earlier, or said alleged action or omission by the Owner or the Architect occurred, a
verified detailed statement, with documentary evidence, of the items and basis of its claim;
D. Produce for the Owner’s examination, upon notice from the Owner, all its books of
account, bills, invoices, payrolls, subcontracts, time books, progress records, daily reports, bank deposit
books, bank statements, checkbooks and cancelled checks, showing all of its actions and transactions
in connection with or relating to or arising by reason of its claim, and submit persons in its employment
and in its subcontractors' employment for examination under oath by any person designated by the
Owner to investigate any claims made against the Owner under the Contract, such examination to be
made at the offices of the Contractor; and
E. Proceed diligently, pending and subsequent to the determination of the Owner with
respect to any such disputed matter, with the performance of the Contract and in accordance with all
instructions of the Owner and the Architect.
F. The Contractor's failure to comply with any or all parts of Section 4.02 shall be deemed
to be: (i) a conclusive and binding determination on its part that said order, work, action or omission
does not involve extra work and is not contrary to the terms and provisions of the Contract; and (ii) a
waiver by the Contractor of all claims for additional compensation or damages as a result of said order,
work, action or omission. The provisions of Section 4.02 is to promptly afford the Owner opportunity
to cancel or revise any order, change its plans, mitigate or remedy the effects or circumstances giving
rise to a claim or take such other action as may seem desirable and to verify any claimed expenses or
circumstances as they occur. Compliance with such provisions is essential whether or not the Owner
is aware of the circumstances of any order or other circumstances which might constitute a basis for a
claim and whether or not the Owner has indicated it will consider a claim in connection therewith.
G. No person has power to waive or modify any of the foregoing provisions and, in any
action against the Owner to recover any sum in excess of the sum certified by the Owner to be due
under or by reason of the Contract, the Contractor must allege in its complaint and prove compliance
with the provisions of this Section.
Section 4.03 - Form of Change Orders
12 Rev 12.2018
All change orders shall be processed, executed and approved via the Owner's E-Builder Change
Order Process. No payment for change order Work shall be due the Contractor unless a change order
has been issued and approved as noted above.
ARTICLE 5 -- TIME OF COMPLETION
Section 5.01 - Time of Completion
A. The Work shall be commenced at the time stated in the written order of the Owner and
shall be completed no later than the date of completion specified in the Contract. All required overtime
to maintain progress schedule is included in the Base Bid.
B. The date of beginning and the time for completion of the Work, as specified in the
Contract, are essential conditions of the Contract.
C. The Work shall be prosecuted diligently at such rate of progress as shall insure full
completion within the time specified. It is expressly understood and agreed, that the time for the
completion of the Work described herein is a reasonable time, taking into consideration the average
climatic range and usual business and labor conditions prevailing in the locality of the Site.
D. Time is of the essence on each and every portion of the Work. In any instance in which
additional time is allowed for the completion of any Work, the new time of completion established by
said extension shall be of the essence. If in the Architect’s or Owner's judgment, it becomes necessary
at any time during construction to accelerate and/or complete certain areas of the project, the Contractor
shall concentrate efforts and manpower on designated areas.
E. Where Work occurs within occupied areas, perform same only on approved schedule,
so as not to interfere with normal operation of occupied areas.
F. The Contractor shall not be charged with damages or any excess cost if the Owner
determines that the Contractor is without fault and the Contractor's reasons for the time extension are
acceptable to the Owner. The Contractor shall not be charged with damages or any excess cost for
delay in completion of the work if the Owner determines that the delay is due to:
1. any preference, priority or allocation order duly issued by the Government of
the United States or the State of New York;
2. unforeseeable cause beyond the control and without the fault or negligence of
the Contractor, and approved by the Owner, including, but not limited to, acts
of God or of public enemy, acts of the Owner, fires, epidemics, quarantine,
restrictions, strikes, freight embargoes and unusually severe weather.
13 Rev 12.2018
G. The time for completion can only be extended by change order and may be extended
for:
1. all of the Work, or
2. only that portion of the Work altered by the change order.
H. Any claim for extension of time shall be made in writing to the Owner not more than
ten (10) days after the commencement of the delay; otherwise it shall be waived.
ARTICLE 6 -- TERMINATION
Section 6.01 - Termination for Cause
In the event that any provision of this Contract is violated by the Contractor or by any
Subcontractor of the Contractor, the Owner may serve written notice upon the Contractor, and upon the
Contractor's surety, if any, of the Owner's intention to terminate the Contract. The notice shall briefly
state the reasons for the termination and shall specify a termination date. If arrangements satisfactory
to the Owner are not made to remove and remedy the violation, the Contract shall terminate upon the
date specified by the Owner in the notice. In the event of termination, the Owner may take over and
complete the Work at the expense of the Contractor. The Contractor and Contractor's surety shall be
liable to the Owner for all costs thereby incurred by the Owner. In the event of such termination the
Owner may take possession of and may utilize such materials, appliances, and plant as may be located
on the Site and which may be necessary or useful in completing the Work.
Section 6.02 - Termination for Convenience of Owner
The Owner, at any time, may terminate the Contract in whole or in part. Any said termination
shall be effected by delivering to the Contractor a notice of termination specifying the extent to which
performance of Work under the Contract is terminated and the date upon which said termination
becomes effective. Upon receipt of the notice of termination, the Contractor shall act promptly to
minimize the expenses resulting from said termination. The Owner shall pay the Contractor for costs
actually incurred by the Contractor up to the effective date of said termination, but in no event shall the
Contractor be entitled to compensation in excess of the total consideration of the Contract. In the event
of said termination the Owner may take over the Work and prosecute same to completion.
Section 6.03 - Owner's Right to do Work
The Owner may, after notice to the Contractor, without terminating the Contract and without
prejudice to any other right or remedy the Owner may have, perform or have performed by others all
of the Work or any part thereof and may deduct the cost thereof from any monies due or to become due
the Contractor.
14 Rev 12.2018
ARTICLE 7 -- DISPUTES
Section 7.01 - Disputes Procedure
A. If the Contractor claims that any Work which the Contractor has been ordered to
perform will be Work which should have been authorized or directed by change order, or that any action
or omission of the Owner is contrary to the terms of the Contract, the Contractor shall:
1. File a notice with the Owner which sets forth the basis of the Contractor's claim
and requests a resolution of the dispute. Such notice shall be filed within
fifteen (15) working days after being ordered to perform the disputed work or
within fifteen (15) working days after commencing performance of the
disputed work, whichever is earlier, or within fifteen (15) working days after
the act or omission of the Owner which the Contractor claims is contrary to
the terms of the Contract.
2. Proceed diligently with the performance of the work in accordance with the
instructions of the Owner pending the resolution of the dispute by the Owner.
3. Promptly comply with the order of the Owner regarding the disputed matter.
4. Any such decision, or any other decision of the Owner in respect to a dispute,
shall be final unless the Contractor, within ten (10) working days after such
decision, shall deliver to the Owner a verified written statement which sets
forth the Contractor's contention that the decision is contrary to a provision of
the contract. Pending the decision of the Owner, the Contractor shall proceed
in accordance with the original decision. The Owner shall determine the
validity of the Contractor's claim and such determination shall be final. The
Contractor may file a notice with the Owner reserving its rights in connection
with the dispute but shall comply with the Owner's decision and complete the
work as directed.
B. No claim for additional costs regarding changed or extra work shall be allowed unless
the work was done pursuant to a written order of the Owner.
C. The value of claims for extra work, if allowed, shall be determined by the methods
described in the Contract. Refer to Article 4 of these General Conditions.
D. The Contractor's failure to comply with any or all parts of Article 7 shall be deemed to
be:
1. a conclusive and binding determination on the part of the Contractor that the
order, work, action or omission is not contrary to the terms and provisions of
the Contract;
2. a waiver by the Contractor of all claims for additional compensation, time
extension, or damages as a result of said order, work, action or omission.
ARTICLE 8 -- SUBCONTRACTS
15 Rev 12.2018
Section 8.01 - Subcontracting
A. The Contractor may utilize the services of Subcontractors.
B. The Contractor shall submit to the Owner, in writing, the name of each proposed
Subcontractor and Sub-Subcontractor, as required by the Contract. The Contractor shall not award any
Work to any Subcontractor or Sub-Subcontractor without the prior written approval of the Owner.
C. The Contractor shall be fully responsible for the Work, acts and omissions of
Subcontractors, and of persons either directly or indirectly employed by Subcontractors.
D. The Contractor shall cause appropriate provisions to be inserted in all subcontracts
relative to the Work to bind Subcontractors to the Contractor by the terms of the Contract insofar as
applicable to the Work of Subcontractors, indemnification and to give the Contractor the same power
to terminate any subcontract that the Owner may exercise over the Contractor.
E. The Contractor's use of Subcontractors shall not diminish the Contractor's obligation
to complete the Work in accordance with the Contract. The Contractor shall control and coordinate the
Work of Subcontractors.
F. Nothing contained in the Contract shall create any contractual relationship between
Subcontractors and the Owner.
ARTICLE 9 -- COORDINATION AND COOPERATION
Section 9.01 - Cooperation with Other Contractors
A. Normally, the Work will be performed by a single Contractor. However, the Owner
reserves the right to perform work related to the Work with its own forces or award separate contracts.
In that event, the Contractor shall coordinate its operations with the Owner's forces or separate
Contractors.
B. The Owner cannot guarantee the responsibility, efficiency, unimpeded operations or
performance of any contractor. The Contractor acknowledges these conditions and shall bear the risk
of all delays including, but not limited to, delays caused by the presence or operations of other
contractors.
C. The Contractor shall keep informed of the progress and workmanship of other
contractors and shall notify the Owner immediately of lack of progress or defective workmanship on
the part of other contractors where said delay or defective workmanship may interfere with the
Contractor's operations.
D. Failure of a Contractor to keep so informed and failure to give notice of lack of progress
or defective workmanship by others shall be construed as acceptance by the Contractor of said progress
and workmanship as being satisfactory for proper coordination with the Work.
E. If the Contractor notifies the Owner, in writing, that another contractor on the Site is
failing to coordinate the work of said contractor with the Work, the Owner shall investigate the charge.
If the Owner finds it to be true, the Owner shall promptly issue such directions to the other contractor
with respect thereto as the situation may require. The Owner shall not be liable for any damages
16 Rev 12.2018
suffered by the Contractor by reason of the other contractor's failure to promptly comply with the
directions so issued by the Owner, or by reason of another contractor's default in performance.
F. If the Owner shall determine that the Contractor is failing to coordinate the Work with
the work of other contractors as the Owner has directed:
1. the Owner shall have the right to withhold any payments due under the
Contract until the Owner's directions are complied with by the Contractor; and
2. the Contractor shall indemnify and hold the Owner harmless from any and all
claims or judgments for damages and from any costs or damages to which the Owner
may be subjected or which the Owner may suffer or incur by reason of the Contractor's
failure promptly to comply with the Owner's directions.
G. Should the Contractor sustain any damage through any act or omission of any other
contractor having a contract with the Owner or through any act or omission of any Subcontractor of
said other contractor, the Contractor shall have no claim against the Owner for said damage.
H. Should any other contractor having a Contract with the Owner sustain damage through
any act or omission of the Contractor or its Subcontractor, the Contractor shall reimburse said other
contractor for all said damages and shall indemnify and hold the Owner harmless from all said claims.
ARTICLE 10 -- PROTECTION OF RIGHTS, PERSONS AND PROPERTY
Section 10.01 - Accidents and Accident Prevention
A. The Contractor shall at all times take reasonable precautions for the safety of persons
engaged in the performance of the work. The Contractor shall comply fully with all applicable
provisions of federal, state, and local law. The Contractor alone shall be responsible for the safety,
efficiency and adequacy of the Contractor's Work, plant, appliances and methods, and for any damage
which may result from the failure or the improper construction, maintenance, or operation of said Work,
plant, appliances and methods.
B. The Contractor shall maintain an accurate record of all cases of death, occupational
disease, and injury requiring medical attention or causing loss of time from work, arising out of or in
the course of employment on Work under the Contract, and shall immediately notify the Owner in
writing of any injury which results in hospitalization or death, or significant near miss incidents that
had the potential to result in serious injury or death. The Contractor shall upload all completed
Contractor and Subcontractor incident investigation forms and reports within five (5) working days of
the incident. The report shall include the extent of damage or injury, the persons involved and their
employers, the number of days persons are hospitalized, and any other pertinent information required
by Cornell University. Such reporting shall be submitted on the e-Builder Accident Form.
C. The Contractor shall provide to the Project Manager, Material Safety Data Sheets
(OSHA Form 20 or the equivalent) for all chemicals to be used on site. All chemicals requiring any
precautionary measures (eg. special storage or disposal requirements, personal protective equipment,
or additional ventilation), shall be brought to the attention of Cornell University for review and
approval, prior to their use on site.
17 Rev 12.2018
1. All chemicals brought on site by the Contractor shall be clearly labeled. The label shall
state the identity of the chemical, any associated hazards, and the Contractor's name.
2. All Contractor employees who are using chemicals shall be made aware of the hazards
associated with their use. Safe chemical handling procedures in accordance with
OSHA or other governmental agencies, and manufacturer's recommendations shall be
used at all times.
3. The Contractor shall dispose of all chemicals in accordance with EPA and Cornell
University requirements, regardless of the size of the container or the quantity of waste,
and must receive prior approval of Cornell University.
4. A Contractor’s Waste Material Disposal Plan form is required (with or without waste)
to be submitted with submission of the first payment. The form can be found at:
https://sp.ehs.cornell.edu/env/solid-waste/construction-demolition-waste/Pages/default.aspx
D. The Contractor shall be responsible for the initiation, maintenance and supervision of
safety precautions and programs in connection with the Work.
E. The Contractor shall, at all times, guard the Owner's property from injury or loss in
connection with the Work. The Contractor shall, at all times, guard and protect the Contractor's Work.
The Contractor shall replace or make good any said loss or injury unless said loss or injury is caused
directly by the Owner.
F. The Contractor shall have full responsibility to install, protect and maintain all
materials and supplies in proper condition and forthwith repair, replace and make good any damage
thereto until Final Acceptance.
Section 10.02 - Adjoining Property
A. The Contractor shall be required to protect all the adjoining property and to repair or
replace any such properties damaged or destroyed by the Contractor, its employees or subcontractors
thereof, by reason of, or as a result of activities under, for or related to the Contract.
Section 10.03 - Emergencies
A. In case of an emergency which threatens loss or injury to persons or property, the
Contractor will be allowed to act, without previous instructions from the Owner, in a diligent manner,
to the extent required to avoid or limit such loss or injury, and the Contractor shall notify the Owner
immediately thereafter of the action taken.
18 Rev 12.2018
Section 10.04 - Bonds
A. Before commencing the performance of any work covered by the Contract, the
Contractor shall furnish to the Owner any required Bonds. The failure of the Contractor to supply the
required Bonds within ten (10) days after the Contract signing shall constitute a default.
Section 10.05 - Risks Assumed by the Contractor
A. Indemnification. The Contractor shall defend, indemnify and hold harmless the Owner
and its trustees, officers, agents and employees from and against all claims, damages, losses, fines, and
expenses, including reasonable attorneys' fees, arising out of or resulting from the performance of the
work including, but not limited to, bodily or personal injury, sickness, disease, death, or injury or
damage to tangible property, to the extent they arise out of or result from:
1. any negligent act or omission, or intentional or willful misconduct, violation
of law, or breach of this Contract by the Contractor, or any of its subcontractors, anyone
directly or indirectly employed by any of them, or anyone for whose acts any of them
may be liable, or
2. any injury to an employee of the Contractor, its subcontractors, anyone directly
or indirectly employed by them. The indemnification obligation under this section shall
not be limited by the amount or type of damages, compensation or benefits payable by
or for the Contractor under workers’ compensation, disability benefit or other
employee benefit laws.
B. In the event that Contractor is requested but refuses to honor its indemnification
obligations hereunder, then the Contractor shall, in addition to all other obligations, pay the cost,
including reasonable attorneys' fees, of bringing an action to enforce such indemnification obligations.
C. Neither the Owner's final acceptance of the work to be performed hereunder nor the
making of any payment shall release the Contractor from its obligations under this Section. The
enumeration elsewhere in the Contract of particular risks assumed by the Contractor or of particular
claims for which the Contractor is responsible shall not be deemed to limit the effect of the provisions
of this Section or to imply that the Contractor assumes or is only responsible for risk or claims of the
type enumerated.
Section 10.06 - Contractor's Compensation and Liability Insurance
A. The Contractor shall procure and maintain, at its own cost and expense, until final
acceptance by the Owner of all the work covered by this Contract, the following kinds of insurance:
1. Worker's Compensation Insurance. A policy complying with the requirements
of the laws of the State of New York and any other laws that may be applicable thereto,
including Coverage B - Employer's Liability with a limit of not less than $1,000,000.
19 Rev 12.2018
2. Contractor's Comprehensive General Liability Insurance. A standard
comprehensive general liability insurance policy, with contractual, completed
operations, explosion, collapse and underground property damage coverage’s issued
to and covering the liability of the Contractor for all work and operations under this
Contract, all obligations assumed by the Contractor under this Contract and all damage
to work performed by subcontractors on your behalf. The Contractor shall provide
Broad Form Comprehensive General Liability Insurance, and the Owner shall be an
additional insured in the policy. The policy shall include cross liability coverage and
shall be endorsed to indicate that it is primary coverage. The completed operations
coverage’s shall be maintained for not less than two years after acceptance of the work.
The coverage under such policy shall be not less than a combined single limit for
Bodily Injury and Property Damage as follows, or such limits carried by the
Contractor, whichever is greater:
BODILY INJURY AND PROPERTY
DAMAGE LIABILITY (BROAD FORM)
$ 5,000,000 Each Occurrence
$ 5,000,000 Aggregate
3. Automobile Liability Insurance. A policy covering the use in connection with
the work covered by the Contract Documents of all owned, non-owned and hired
vehicles bearing, or, under the circumstances under which they are being used, required
by the Motor Vehicle Laws of the State of New York to bear license plates. The
coverage under such policy shall be not less than a combined single limit for Bodily
Injury and Property Damage of:
BODILY INJURY AND
PROPERTY DAMAGE LIABILITY
$ 1,000,000 Each Person
$ 1,000,000 Each Accident
B. In addition to maintaining all of the above insurances, the Contractor shall indemnify
and hold harmless the Owner and its agents and employees from and against liability, including
additional premium due because of the Contractor's failure to maintain coverage limits as required
under this section.
C. Insurance similar to that required of the Contractor shall be provided by or on behalf
of all subcontractors to cover their own operations performed under this Contract. The Contractor shall
be held responsible for any modifications in these insurance requirements as they apply to
subcontractors.
20 Rev 12.2018
D. Before commencing the performance of any work covered by the Contract, the
Contractor shall furnish to the Owner a current certificate or certificates, in duplicate, of the insurance
required under the foregoing provisions including copies of subcontractor’s certificates. Such
certificates shall be on a form prescribed by the Owner, shall list the various coverage’s and shall
contain, in addition to any provisions hereinbefore required, a provision that the policy shall not be
changed or cancelled and that it will be automatically renewed upon expiration and continued in force
until final acceptance by the Owner of all the work covered by the Contract, unless the Owner is given
thirty (30) days written notice to the contrary. Upon renewal of each of the Contractor's insurance
coverage’s, the Owner shall be provided with a new certificate of insurance showing such renewal.
Certificates and written notices shall be directed to the Office of Facilities Contracts. The Contractor
shall furnish the Owner with a certified copy of each policy including any and all exclusions to such
policy.
E. If at any time any of the above required insurance policies should be cancelled,
terminated or modified so that insurance is not in effect as above required, then, if the Owner shall so
direct, the Contractor shall suspend performance of the work covered in the Contract. If the said work
is so suspended, no extension of time shall be due on account thereof. The Owner may, at its option,
obtain insurance affording coverage equal to that above required, at the Contractor's expense.
Section 10.07 - Liability Insurance of the Owner
A. The Owner, at its own cost and expense, shall procure and maintain such liability
insurance as will, in its opinion, protect the Owner from its contingent liability to others for damages
because of bodily injury, including death, and property damage which may arise from operations under
this Contract.
21 Rev 12.2018
Section 10.08 - Owner's and Contractor's Responsibilities for Fire and Extended Coverage Insurance
Hazards
A. The Contractor shall purchase and maintain in force a builders risk insurance policy on
the entire work. Such insurance shall be written on a completed value form and in an amount equal to
the initial contract sum and modified by any subsequent modifications to the contract sum. The
insurance shall name Cornell University and the State of New York, all subcontractors and sub-
subcontractors. The insurance policy shall contain a provision that the insurance will not be cancelled
or allowed to expire until the Contractor has given at least thirty (30) days prior written notice to Cornell
University. The insurance shall cover the entire work at the site, including reasonable compensation
for Architect’s services and expenses made necessary by an insured loss. Insured property shall include
portions of the work located away from the site and in transit to the site. The policy shall cover the cost
of removing debris and demolition as may be legally necessary. The policy shall cover any boiler or
machinery loss which may be suffered during installation and until final acceptance. The insurance
required shall be written to cover “all risk” of physical loss including a loss due to collapse. Any
deductible shall be the responsibility of the Contractor but in no case shall the deductible be more than
$10,000 unless Cornell University has agreed to a higher deductible. The Contractor shall provide to
Cornell University a certificate of insurance and a summary of coverage’s including all endorsements
and exclusions prior to commencement of the work. Once the policy is received, the Contractor shall
provide a copy of such policy to Cornell University. There shall be a mutual waiver of recovery
between Cornell University, the Contractor and all other parties to the extent such losses are covered
by the builders risk policy. If Cornell University wishes to occupy the building prior to final acceptance
and if the policy contains a provision which limits coverage for such partial occupancy, the parties
agree work together to obtain consent of the insurance company for such partial occupancy or use under
mutually acceptable terms.
B. Losses, if any, under such insurance shall be payable to the Owner.
C. The Contractor shall be responsible for any and all loss of materials connected with the
construction due to unexplainable disappearance, theft or misappropriation of any kind or nature.
D. The foregoing provisions shall not operate to relieve the Contractor and subcontractors
of responsibility for any loss or damage to their own or rented property or property of their employees,
of whatever kind or nature, or on account of labor performed under the Contract incidental to the repair,
replacement, salvage, or restoration of such items, including but not limited to tools, equipment, forms,
scaffolding, and temporary structures, including their contents, regardless of ownership of such
contents, except for such contents as are to be included in and remain a part of the permanent
construction. The Owner shall in no event be liable for any loss or damage to any of the aforementioned
items, or any other property of the Contractor, subcontractors and the Architect, or employees, agents,
or servants of same, which is not to be included in and remain a part of the permanent construction.
The Contractor and subcontractors severally waive any rights of recovery they may have against the
Owner and the Architect for damage or destruction of their own or rented property, or property of their
employees of whatever kind or nature.
22 Rev 12.2018
Section 10.09 - Effect of Procurement of Insurance
A. Neither the procurement nor the maintenance of any type of insurance by the Owner
or the Contractor shall in any way be construed or be deemed to limit, discharge, waive or release the
Contractor from any of the obligations and risks imposed upon the Contractor by the Contract or to be
a limitation on the nature or extent of such obligations and risks.
Section 10.10 - No Third Party Rights
A. Nothing in the Contract shall create or give to third parties; any claim or right of action
against the Contractor, the Architect, and the Owner beyond such as may legally exist irrespective of
the Contract.
ARTICLE 11 -- USE OR OCCUPANCY PRIOR TO ACCEPTANCE BY OWNER
Section 11.01 – Substantial Completion
A. The term "substantial completion" means the completion of the Work to the extent that
Cornell University may have uninterrupted occupancy or use of the facility or specified portion thereof
for the purpose for which intended. The Contractor shall obtain all certificates of occupancy required
prior to occupancy, and any electrical, mechanical and plumbing certificates, or other certificates or
required approvals and acceptances by City, County, and State governments or other authority having
jurisdiction.
Section 11.02 - Occupancy Prior to Acceptance
A. If, before Final Acceptance, the Owner desires Beneficial Occupancy of the Work, or
any part thereof, which is completed or partly completed, or to place or install therein equipment and
furnishings, the Owner shall have the right to do so, and the Contractor shall in no way interfere with
or object to said Beneficial Occupancy by the Owner.
B. Said Beneficial Occupancy (1) shall not constitute acceptance of space, systems,
materials or elements of the Work, nor shall said Beneficial Occupancy affect the start of any guarantee
period, and (2) shall not affect the obligations of the Contractor for Work which is not in accordance
with the requirements of the Contract or other obligations of the Contractor under the Contract.
C. The Contractor shall continue the performance of the Work in a manner which shall
not unreasonably interfere with said use, occupancy and operation by the Owner.
ARTICLE 12 -- PAYMENT
Section 12.01 - Provision for Payment
A. The Owner agrees to pay the Contract Price to the Contractor for the performance of
this Contract and the fulfillment of all the Contractor's obligations. The Contract Price means all costs
reimbursable under the Contract Documents.
B. The final certificate of the Architect shall certify that the Contract has been completed
within the stipulated time, and shall not be issued until all drawings and specifications have been
23 Rev 12.2018
returned to the Owner. The issuance of said certificates, however, or any payments made thereon shall
not lessen the total responsibility of the Contractor to complete the work to the satisfaction of the Owner
in accordance with the Contract.
C. Payments on the Contract Price shall be made each month as the work progresses in
accord with the following procedure:
1. The Contractor's schedule of values, including quantities, aggregating the total
Contract Price, divided so as to facilitate payments to subcontractors as specified
herein, shall be the basis for monthly progress payments. This schedule, as shown in
the E-Builder Schedule of Values Process, when approved by the Owner shall be used
as a basis for progress payments. In applying for payments, the Contractor shall submit
a statement based upon this approved schedule.
2. (a) On a date agreed upon by the Owner, Architect, and Contractor, a meeting
shall be held by the Owner to review the work completed and materials on
hand. This meeting shall review each item to be submitted by the Contractor
in the requisition for payment.
(b) On the first day of each month, or as soon thereafter as practicable, the
Contractor shall submit via the E-Builder Payment Application Process, a
statement and all applicable documentation setting forth in detail the cost of
the work done and materials delivered to the job site up to and including the
last day of the previous month and shall make application for payment of
ninety percent (90%) of the amount of said statement, less the aggregate of all
previous payments made by the Owner against the Contract Price.
(c) Each statement and application shall be accompanied by an affidavit,
executed by the Contractor, certifying that the statement is true and correct,
and that all bills for labor, and materials incorporated in or delivered to the job,
due and payable at the time of the preceding progress payment, have been paid.
The Contractor shall attach a single .pdf file of certified payrolls for all
employees on the project as indicated in the E-Builder Payment Application
Process. Before final payment is made, the Contractor shall submit evidence
that all payrolls, material bills and other indebtedness incurred in connection
with the Contract have been paid, including final waivers of any liens.
3. Each such application for payment shall be subject to the review and approval
of the Architect. If the Architect finds that the affidavit and application for payment
are acceptable and that all the above requirements in connection therewith have been
complied with, the Architect shall, within seven (7) calendar days after receiving such
application for payment, certify to the Owner that the payment applied for is due and
payable to the Contractor.
24 Rev 12.2018
4. The issuance of a Certificate for Payment constitutes a representation by the
Architect to the Owner, based on the date of the Application for Payment, that the work
has progressed to the point indicated, that, to the best of their knowledge, information,
and belief, the quality of the work is in accordance with the Contract Documents and
that the Contractor is entitled to payment in the amount certified.
The Owner shall make payment in the manner provided in the Agreement
within thirty (30) calendar days of receipt of the approved Certificate in E-Builder.
Approval of the Payment Application by the Architect shall not be deemed to
represent that the Architect has made exhaustive or continuous on-site inspections to
check the quality or quantity of the work or that the Architect has reviewed the
construction means, methods, techniques, sequences, or proceedings or that the
Architect has made any examination to ascertain how or for what purpose the
Contractor has used the monies previously paid on account of the Contract Sum.
Section 12.02 – Stored Materials & Equipment
A. The Contractor may submit, no more than thirty (30) calendar days after contract
approval and prior to the first application for payment, a written request to Cornell University for
permission to invoice for critical materials and equipment ready, but not yet incorporated into the work.
For the purpose of this paragraph, "critical materials and equipment" eligible for payment are defined
as those items affecting project schedule or budget as determined by Cornell University's evaluation of
the project schedule. This includes finished goods normally shipped to the job site in a condition ready
for incorporation into the work that require significant time for delivery. Raw materials or work-in-
process at a manufacturer's plant location shall not be eligible for such consideration unless the
Contractor can demonstrate that Cornell University can save money by purchasing material in bulk
quantities at the beginning of the project.
B. Cornell University will be under no obligation to accept such requests.
C. Payment authorized by Cornell University for such "long-lead" critical materials and
equipment not yet incorporated in the work will be made provided the Contractor submits Exhibit H
and complies with the following:
1. Items shall be listed in the “Total Materials Presently Stored” column on the
Application for Payment.
2. Transfer of Title shall be executed and included in the Application for
Payment.
3. The method used to store off-site items shall be described in the Contractor's
request to invoice for such materials and equipment. Cornell University shall
give prior approval of the location of off-site storage. Items requiring special
environmental conditions to protect their integrity (temperature, humidity,
etc.) shall be continuously stored in such an environment.
25 Rev 12.2018
4. Items in storage shall be identified as property of Cornell University, and a
description of the identification method used shall be submitted in the
Application for Payment. Contractor shall maintain all necessary insurance on
items in storage.
5. A written and photographic inventory of items and method used to verify such
inventory, including Contractor's certification that all quantities have been
received in good condition at the job site or other location acceptable to
Cornell University shall be submitted with the Application for Payment.
6. A copy of the vendor's invoice is included with the Contractor's invoice.
Packing lists will not be accepted.
D. Cornell University retains the right to verify storage by physical inspection prior to
payment approval and at any time thereafter. Such payment shall not relieve the Contractor of the
responsibility for protecting, safeguarding, and properly installing the equipment or materials. The
Warranty and Guarantee period shall not commence until installation and final acceptance of the
completed work by Cornell University. The Contractor shall bear the cost of transporting materials
stored off-site to the site
E. Each subsequent invoice will restate the prior months' materials and equipment not
incorporated in the Work and current month additions and deletions for materials and equipment
incorporated into the Work.
F. Upon the making of partial payment by Cornell University, all work, materials, and
equipment covered thereby shall become the sole property of Cornell University. Partial payments,
however, shall not constitute acceptance of the Contractor's work by Cornell University, nor be
construed as a waiver of any right or claim by Cornell University.
Section 12.03 – Retention
A. Retention in the amount of ten percent (10%) of the value of the work done and
materials furnished and installed under this Agreement shall be retained by the Owner as part security
for the faithful performance of the Contractor’s work within the time specified, and shall be paid as
indicated in Section 12.06.
B. Cornell University in its sole discretion may, upon the Contractor's application thereof,
release retention applicable to a subcontractor, provided that there are no outstanding claims associated
with the subcontractor's work and the subcontractor and Contractor submit an acceptable partial or final
release when submitting the payment application process. If the project is bonded, a Consent of Surety
to the reduction must be attached as well.
26 Rev 12.2018
Section 12.04 - Withholding Payments
A. The Owner may, on account of subsequently discovered evidence, withhold or nullify
the whole or a part of any Certificate to such extent as may be necessary to protect the Owner from loss
on account of:
1. Defective work not remedied.
2. To assure payment of just claims of any persons supplying labor or materials
for the work and to discharge any lien filed against the Owner's property.
3. A reasonable doubt that the Contract can be completed for the balance of the
Contract Price then unpaid.
4. Damage to another Contractor.
5. Unsatisfactory prosecution of the work by the Contractor.
6. Failure to provide and maintain an acceptable Critical Path Method Network
Schedule.
Section 12.05 – Documents and Conditions Precedent to Final Payment
A. As-Built Documentation
1. Prior to acceptance by the Owner of all work covered by the Contract, the Contractor
shall furnish to the Owner through the Architect one (1) set of current reproducible
full-size Contract Drawings on which the Contractor has recorded in a neat and
workmanlike manner all instances where actual field construction differs from work
as indicated on the Contract Drawings.
B. Final Documentation:
1. Prior to final payment, and before the issuance of a final certificate for payment in
accordance with the provisions of these General Conditions, file the following
documents with the Owner.
a. Warranties, Bonds, Service & Maintenance Contracts and any other extended
guarantees stated in the technical sections of the Specifications.
b. Release or Waiver of Lien for the Contractor and Sub-Contractors in accordance
with Exhibit C, attached hereto.
c. Project Record Documents as defined in General Requirements Section
01 78 39.
d. Notification that Final Punch List work has been completed.
e. Manufacturers Instruction and Maintenance Manuals as defined in General
Requirements Section 01 78 23.
27 Rev 12.2018
f. Fixed Equipment Inventory as defined in General Requirements Section
01 78 22.
2. The Contractor shall also provide a CD containing scanned .pdf format and/or Word
Documents of all documentation.
Section 12.06 - Final Payment and Release
A. When the Contractor determines that the work or a designated portion thereof is
substantially complete, the Contractor shall prepare for submission to the Owner a list of items to be
completed or corrected. This list, prepared by the Contractor, shall constitute a complete detailed list
of defects and deficiencies which, when remedied, will complete all Contract requirements. The
submittal shall be accompanied by a statement to that effect.
B. The failure to include any items on such list does not alter the responsibility of the
Contractor to complete all work in accordance with the Contract Documents. When the Architect, on
the basis of an inspection, determines that the work is substantially complete, the Architect will then
prepare a Certificate of Substantial Completion.
C. Upon receipt of written notice that the work is ready for final inspection and
acceptance, the Architect will promptly make such inspection and, when the Architect finds the work
acceptable under the provisions of the Contract Documents, and the Contract fully performed, and if
bonds have been required, the written Consent of the Surety to the payment of the balance due, and a
satisfactory Release of Lien, attached hereto as Exhibit "C" and made a part of the Contract Documents,
has been submitted by the Contractor, each subcontractor and sub-subcontractor, the Contractor will
promptly issue a final Certificate for Payment, stating that to the best of their knowledge, information,
and belief, and on the basis of their observations and inspections the work has been completed in
accordance with the terms and conditions of the Contract Documents, and that the entire balance is due
and payable.
D. All prior certificates upon which progress payments may have been made, being
estimates, shall be subject to correction to the final certificate.
E. The acceptance by the Contractor of the final payment aforesaid shall constitute a
general release of the Owner and its agents or representatives from all claims and liability to the
Contractor.
ARTICLE 13 -- TAX EXEMPTION
Section 13.01 - Tax Exemption
A. The Owner is exempt from payment of Federal, State and local taxes, including sales
and compensating use taxes on all materials and supplies incorporated into the completed Work. These
taxes are not to be included in bids. This exemption does not apply to tools, machinery, equipment or
other property leased by or to the Contractor or a Subcontractor, or to supplies and materials which,
even though they are consumed, are not incorporated into the completed Work, and the Contractor and
Subcontractors shall be responsible for and pay any and all applicable taxes, including sales and
compensating use taxes, on said leased tools, machinery, equipment or other property and upon all said
unincorporated supplies and materials.
28 Rev 12.2018
B. The Contractor and Subcontractor shall obtain any and all necessary certificates or
other documentation from the appropriate governmental agency or agencies, and use said certificates
or other documentation as required by law, rule or regulation.
ARTICLE 14 -- GUARANTEE
Section 14.01 - Guarantee
A. The Contractor, at the convenience of the Owner, shall remove, replace and/or repair
at their own costs and expense any defects in workmanship, materials, ratings, capacities or
characteristics occurring in or to the work covered by Contract for the period of one (1) year or within
such longer period as may otherwise be provided in the Contract, the period of such guarantee to
commence with the Owner's final acceptance of all work covered under the Contract, and the
Contractor, upon demand, shall pay for all damage to all other work resulting from such defects and all
expenses necessary to remove, replace and/or repair such work which may be damaged in removing,
replacing or repairing the said defects. Acceptance means final acceptance of the entire work, early
partial occupancy notwithstanding
B. In some instances the nature of the work may require the Owner to accept various
components, equipment, spaces or phase of the project. In such cases the Contractor shall submit a
separate guarantee for the Owner's acceptance on the form attached hereto as Exhibit "E". Upon
completion of the project, the Contractor shall submit to the Owner a guarantee for the project on the
form attached hereto as Exhibit "E".
ARTICLE 15 -- STANDARD PROVISIONS
Section 15.01 - Provisions Required by Law Deemed Inserted
Each and every provision of law or clause required by law to be inserted in the Contract and
made a part hereof, shall be deemed to be inserted herein and, in the event any such provision is not
inserted or is not correctly inserted, then upon the application of either party, this Contract shall
forthwith be physically amended to make such insertion or correction.
Section 15.02 - Laws Governing the Contract
The Contract shall be governed by the laws of the State of New York, without reference to
conflict of law principles. Any and all proceedings relating to the subject matter hereof shall be
maintained in New York State Supreme Court, Tompkins County or the federal district court for the
Northern District of New York, which courts shall have exclusive jurisdiction for such purposes.
Section 15.03 - Assignments
The Contractor shall not assign the Contract in whole or in part without prior written consent
of the Owner.
29 Rev 12.2018
Section 15.04 - No Third Party Rights
Nothing in the Contract shall create or shall give to third parties any claim or right of action
against the Owner, beyond such rights as may legally exist irrespective of the Contract.
Section 15.05 - Waiver of Rights of Owner
A. None of the provisions of the Contract will be considered waived by the Owner except
when such waiver is given in writing.
Section 15.06 - Limitation on Actions
No action or proceeding shall be filed or shall be maintained by the Contractor against the
Owner unless said action shall be commenced within six (6) months after receipt by the Owner of the
Contractor's final requisition or, if the Contract is terminated by the Owner, unless said action is
commenced within six (6) months after the date of said termination.
Section 15.07 - Owner's Representative
The Owner shall designate a representative authorized to act in its behalf with respect
to the Project. The Owner or its representative shall examine documents and shall render approvals
and decisions pertaining thereto promptly, to avoid unreasonable delay in the progress of the
Contractor's work. Only directives from Cornell University’s designated representative (Michael
Stewart) shall be recognized by the Contractor.
ARTICLE 16 – MINORITY AND WOMEN BUSINESS ENTERPRISES
Section 16.01 – Definitions
The terms "Minority-owned business enterprise" ("MBE") or “Women-owned business
enterprise” (“WBE”) or “minority group member” shall have the same meaning as under Section 310
of the New York State Executive Law, as the same may be from time to time amended.
Section 16.02 – Participation by Minority and Women Business Enterprises
A. The Contractor shall, in addition to any other nondiscrimination provision of the
Contract and at no additional cost to Owner, fully comply and cooperate with the Owner in the
implementation of MBE and WBE goals. These requirements include equal employment opportunities
for minority group members and women (“EEO”) and contracting opportunities for certified minority
and women-owned business enterprises (“MWBEs”). The Contractor’s demonstration of “good faith
efforts” shall be a part of these requirements. These provisions shall be deemed supplementary to, and
not in lieu of, the nondiscrimination provisions required by New York State or other applicable federal,
state or local laws.
B. The Contractor shall include the provisions of this Article in each and every Agreement
and/or Contract in such a manner that the provisions of this Article will be binding upon each
subcontractor and supplier as to work in connection with and related to this Agreement.
30 Rev 12.2018
C. For purposes of this procurement, the Owner has established goals as outlined in the
Bid Form for Minority-Owned Business Enterprises (“MBE”) and Women-Owned Business
Enterprises (“WBE”) participation.
1. The goal for Minority-Owned Business Enterprise participation shall be
applied as follows: a maximum of one third (1/3) of the goal may be applied
to purchases of materials, supplies, and equipment from MBEs.
2. The goal for Women-Owned Business Enterprise participation shall be applied
as follows: a maximum of one third (1/3) of the goal may be applied to
purchases of materials, supplies, and equipment from WBEs.
D. For purposes of providing meaningful participation by MWBEs on the Contract and
achieving the Contract Goals established in paragraph C above, the Contractor should reference the
Directory of New York State Certified MWBEs found at the following internet address:
http://www.esd.ny.gov/mwbe.html.
E. Where MWBE goals have been established herein, the Contractor must document
“good faith efforts” to provide meaningful participation by MWBEs as sub-contractors or suppliers in
the performance of the Contract.
F. Where it appears that a Contractor is unable to comply with the MWBE participation
requirements, Contractor may submit in writing for the Owner’s consideration, the reasons for
Contractor’s inability to meet any or all of the participation requirements together with an explanation
of the efforts taken by the Contractor to obtain the stated MWBE participation.
Section 16.03 MWBE Utilization Plan
A. The Contractor shall submit a MBE/WBE Utilization Plan for the Owner’s review prior
within fifteen (15) calendar days after receipt of a Letter of Intent or Notice to Proceed.
B. The Contractor shall use such Owner approved MBE/WBE Utilization Plan for the
performance of MWBEs on the Contract pursuant to the prescribed MWBE goals established in Article
16 hereof. The Contractor shall designate a Compliance Officer in their organization who shall be
responsible for implementing the MBE/WBE Utilization Plan of the Contractor and its subcontractors.
Said Compliance Officer shall make such periodic, but not less than monthly, reports on the Plans'
progress and on the number of women and minority workers employed. These reports shall be
submitted to the Owner Representative on the Affirmative Action Workforce Report attached hereto as
Exhibit "D".
Section 16.04 Reports and Records
A. The following forms, attached hereto as Exhibit "D" and made a part of the Contract
Documents, are to be used in submitting MBE/WBE Utilization Plans. Electronic versions are available
in the E-Builder Resources Project or at https://fcs.cornell.edu/project-contractors-and-consultants.
1. MWBE Utilization Plan
2. Affirmative Action Workforce Report
B. The Contractor shall demonstrate compliance with these goals by submission of the
Affirmative Action Workforce Report on a monthly basis, or as requested by Owner. The Contractor
31 Rev 12.2018
shall provide a single monthly report inclusive of all subcontractor information for the project labor
and such report must document the progress made towards achievement of the MWBE goals of the
Contract. Such forms shall be uploaded monthly to E-Builder.
C. The Contractor shall permit access to its books, records and accounts by the Owner for
purposes of investigation to ascertain compliance with the provisions of this Article. The Contractor
shall include this provision in every subcontract so that such provision will be binding upon each
subcontractor.
ARTICLE 17 -- ACCOUNTINGS, INSPECTION AND AUDIT
The Contractor agrees to keep books and records showing the actual costs incurred for the
Work. Such books and records (including, without limitation, any electronic data processing files used
by the Contractor in analyzing and recording the Work) shall be open for inspection and audit by the
Owner and its authorized representatives at reasonable hours at the Contractor's local office or at the
Owner's office, if necessary, and shall be retained by the Contractor for a period of seven years after
the Work has been completed, except that if any litigation, claim or audit is started before the expiration
date of the seven year period, the records shall be retained until all litigation, claims or audit findings
involving the records have been resolved.. Each Sub-Contractor shall be similarly obligated to
maintain, for inspection and audit by the Owner, books and records respecting the Work. If requested
by the Owner, the Contractor shall furnish copies of any and all subcontracts, purchase orders and/or
requisitions of any nature associated with the project.
ARTICLE 18 – CONTRACTOR PERFORMANCE EVALUATION
At project completion the Owner shall schedule a meeting to review with the Contractor their
performance for the project unless performance warrants additional reviews. The Owner may schedule
a meeting at fifty percent (50% completion) based on project complexity and/or duration. The Owner
shall present its review based on the attached “Contractor Performance Evaluation”, Exhibit I. The
Contractor shall be given the opportunity to provide input as to the findings of the evaluation after
completion by the Owner.
ARTICLE 19 -- ROYALTIES AND PATENTS
The Contractor shall pay all royalties and license fees and shall defend all suits or claims for
infringement of any patents, and shall save Cornell University harmless from loss on account thereof;
except that Cornell University shall be responsible for all such loss when a particular process or product
is specified by Cornell University unless the Contractor shall have reason to believe that the particular
process or product infringes a patent, in which event it shall be responsible for loss on account thereof
unless it promptly provides such information to Cornell University.
32 Rev 12.2018
ARTICLE 20 -- CONFIDENTIALITY AND USE OF OWNER'S NAME
Section 20.01 - Release of Information
The Contractor shall not divulge information concerning the Work (including news releases,
social media, internal house organizations, applications for permits, etc.) to anyone without Cornell
University's prior written approval, except to subcontractors and suppliers to the extent that they need
such information to perform their work. The Contractor shall require a similar agreement from each
such subcontractor and supplier, requiring their compliance with the foregoing. Cornell University
reserves the right to release all information, as well as to time its release and specify its form and
content. The Contractor may obtain Cornell University's approval to release information by submitting
such request to the Cornell University Project Manager.
Section 20.02 - Confidential Information
The term "Confidential Information" means all unpublished information obtained or received
from Cornell University during the term of this Contract which relates to Cornell University's research,
development, manufacturing and business affairs. The Contractor shall not disclose confidential
information to any person, except to its employees and subcontractors to the extent that they require it
in the performance of their Work, during the term of this Contract and until authorized by Cornell
University in writing. The Contractor and its subcontractors shall hold all confidential information in
trust and confidence for Cornell University, and shall use confidential information only for the purpose
of this Contract. The Contractor and its subcontractors shall require all of their employees to whom
confidential information is revealed to comply with these provisions. The Contractor shall have an
agreement with each subcontractor, requiring their compliance with the foregoing. If it becomes
necessary for the Contractor to defend in case of litigation related to its services rendered, permission
shall be sought from Cornell University, who shall not unreasonably withhold such permission, before
any disclosures are made. This Section does not apply to information which (1) is or becomes known
in public domain or (2) is learned by the Contractor from third parties.
Section 20.03 - Use of Owner's Name
The Contractor shall not use, in its external, advertising, marketing program, social media, or
other promotional efforts, any date, pictures, or other representation of the Owner except on the specific
written authorization in advance of the Owner's Representative.
33 Rev 12.2018
ARTICLE 21 -- CORNELL UNIVERSITY STANDARDS OF ETHICAL CONDUCT
Cornell University expects all executive officers, trustees, faculty, staff, student employees,
and others, when acting on behalf of the university, to maintain the highest standard of ethical conduct
as per Cornell University's Policy 4.6 - Standards of Ethical Conduct, a copy of which is available at
https://fcs.cornell.edu/project-contractors-and-consultants This includes treating equally all persons
and firms currently doing business with or seeking to do business with or for Cornell University,
whether as contractors, subcontractors, or suppliers. Such persons and firms are respectfully reminded
that Cornell University employees and their families may not personally benefit from Cornell
University's business relationships by the acceptance of gifts or gratuities, defined as a gift in excess of
$75.00 given to a Cornell employee for personal use. Items not considered gifts/gratuities include
occasional business meals, items of an advertising nature, and items that are generally distributed to all
potential customers. In addition, it is expected that the Contractor's officers and employees shall
conduct all business related to this Contract within the highest ethical standards, observing applicable
policies, practices, regulations, law, and professional standards. All parties are expected to report
violations of this policy to appropriate university personnel. You may file a report to on the web
https://secure.ethicspoint.com/domain/en/report_custom.asp?clientid=6357 or contact Cornell
University through EthicsPoint by dialing toll-free 1-866-293-3077.
CORNELL UNIVERSITY
EXHIBIT "A"
Construction Contract Change Order Forms
Instructions to Change Order Documentation
Cornell University has several standard forms related to Changes in the Work. These forms have
been prepared to comply with contract requirements related to Changes in the Work. The standard
Construction Contract Change Order Request and Change Order Summary Forms shall be used to
facilitate preparation of change order requests in conformity with construction contract
requirements.
These forms shall be used by the Contractor and by all Subcontractors in preparing their respective
cost estimates for services associated with the Changed Work for the Owner’s consideration and
shall include all associated back-up documentation supporting the request.
Direct Cost of the Work:
1. Direct Labor – Include the “wages paid” hourly direct labor and/or foreman necessary
to perform the required change. “Wages paid” is the burdened labor rate documented in
accordance with Section 2.14 – Project Labor Rates of the General Conditions. “Assigned
Personnel or Work Crews” should be stated by trade or type of work performed not by
name of person or company title. For example carpenter, mason, backhoe operator, etc.
Supervisory personnel in district or home office shall not be included. Supervisory
personnel on the job-site, but with broad supervisory responsibility and paid as salaried
personnel, shall not be included as Direct Labor
2. Direct Material – Include the acquisition cost of all materials directly required to
perform the required change. Examples of “Unit of Measure” include square feet, cubic
yards, linear feet, days, gallons, etc.
3. Equipment – Include the rental cost of equipment items necessary to perform the
change. For company-owned equipment items, include documentation of internal rental
rates. Charges for small tools, and craft specific tools are not allowed.
Bond Premiums
The Contractor’s actual documented bond premium rate as stated on their Bid Form at time
of bid shall be added to all direct and indirect costs of the proposed change.
Overhead & Profit
The Contractor’s overhead & profit rate shall be added to all direct and indirect costs of
the proposed change in accordance with the Contract.
EXHIBIT "A"
EXHIBIT "A"
CONSTRUCTION CONTRACT CHANGE ORDER SUMMARY
DATE:
PCO #
PROJECT TITLE:CONTRACT NO.
CONTRACTOR:
DETAILED DESCRIPTION OF WORK:
1 DIRECT COST OF WORK:
NAME OF CONTRACTOR/SUBCONTRACTORS TO TAL
PERFORMING WORK COST
TOTAL COST OF PROPOSED CHANGE ORDER ITEM $0
TOTAL CONTRACT DAYS ADDED/DELETED FROM PROJECT SCHEDULE
THIS PAGE INTENTIONALLY LEFT BLANK
FINAL RELEASE EXHIBIT "B"
FINAL WAIVER OF CLAIMS AND LIENS AND RELEASE OF RIGHTS
Sworn to before me this Corporation or Business Name
Day of 20 By:
Title:
Date Contract Date
Project Contract Price
Address Net Extras and Deductions
City Adjusted Contract Price
County Amount Previously Paid
State Balance Due - Final Payment
The undersigned hereby acknowledges that the above Balance Due when paid represents payment in full for all labor,
materials, etc., furnished by the below named Contractor or Supplier in connection with its work on the above Project
in accordance with the Contract.
In consideration of the amounts and sums previously received, and the payment of $
being the full and Final Payment amount due, the below named Contractor or Supplier does hereby waive and release
the Owner from any and all claims and liens and rights of liens upon the premises described above, and upon
improvements now or hereafter thereon, and upon the monies or other considerations due or to become due from the
Owner or from any other person, firm or corporation, said claims, liens and rights of liens being on account of labor,
services, materials, fixtures or apparatus heretofore furnished by the below named Contractor or Supplier to the Project.
The premises as to which said claims and liens are hereby released are identified as follows:
.
The undersigned further represents and warrants that he/she is duly authorized and empowered to sign and execute
this waiver on his/her own behalf and on behalf of the company or business for which he/she is signing; that it has
properly performed all work and furnished all materials of the specified quality per plans and specifications and in a
good and workmanlike manner, fully and completely; that it has paid for all the labor, materials, equipment and services
that it has used or supplied, that it has no other outstanding and unpaid applications, invoices, retentions, holdbacks,
expenses employed in the prosecution of work, chargebacks or unbilled work or materials against the Owner as of the
date of the aforementioned last and final payment application; and that any materials which have been supplied or
incorporated into the above premises were either taken from its fully-paid or open stock or were fully paid for and
supplied on the last and final payment application or invoice.
The undersigned further agrees to defend, indemnify and hold harmless the Owner for any losses or expenses
(including without limitation reasonable attorneys' fees) should any such claim, lien or right of lien be asserted by the
below named Contractor or Supplier or by any of its or their laborers, material persons or subcontractors.
In addition, for and in consideration of the amounts and sums received, the below named Contractor or Supplier
hereby waives, releases and relinquishes any and all claims, rights or causes of action in equity or law whatsoever
arising out of through or under the above mentioned Contract and the performance of work pursuant thereto.
The below named Contractor or Supplier further guarantees that all portions of the work furnished and installed
are in accordance with the Contract and that the terms of the Contract with respect to this guarantee will remain in effect
for the period specified in said Contract.
THIS PAGE INTENTIONALLY LEFT BLANK
EXHIBIT "C"
GUARANTEE
Date:
In accordance with plans and specifications and the terms and conditions of our contract with Cornell
University dated , we hereby guarantee
the as found in the specifications
for , Ithaca, New York to be free
(Project Title)
from defects in materials and workmanship for the period of year(s) from
, the date of acceptance by the Owner.
(Date)
(COMPANY)
By:
Title:
THIS PAGE INTENTIONALLY LEFT BLANK
EXHIBIT "D" – FORM I
1
MWBE Utilization Plan
– Submit Part I and Part II within 15 days after Letter of Intent or Notice to Proceed –
– Submit Part III Quarterly and at end of project –
PART I – PROJECT INFORMATION
e-Builder Project No.
Project Name:
Contract Value:
Contractor Name and Address:
Primary Contact Name, Phone Number, Email: Bid Date:
% Goals MBE: 3.7% WBE: 3.3% Contractor’s MWBE Contact Name, Phone Number, Email:
PART II – MWBE LIST (Update as MWBE firms come under contract, sign and date, resubmit)
Subcontractor Name, Address,
Contact, Email, MBE or WBE
(List your firm if also MBE or WBE)
Federal ID
Number
Dollar Value of
Contract or
Purchase Order
Description of Work or
Supplies
Subcontractor or
Supplier Start and
End Dates
(Update totals as MWBE firms are added/subtracted to above
list)
Print Name of Principal or Officer: Title:
Signature: Date:
MWBE Contract
Percentages Summary
%
MBE Totals
WBE Totals
EXHIBIT "D" – FORM I
2
MWBE Utilization Plan
– Submit Part I and Part II within 15 days after Letter of Intent or Notice to Proceed –
– Submit Part III Quarterly and at end of project –
PART III – Quarterly Utilization Report (Subcontractors & Sub-subcontractors fill this out and submit
to General Contractor to compile into a single form.) Double click on table to edit.
Month/Year:
General Contractor, Subcontractor, Sub-
Subcontractor, or Vendor Trade
Dollar Value of
SubContract or
Purchase Order
MBE,
WBE, or
N/A
% of Total
Contract
TOTALS 0 0
EXHIBIT "D" - FORM II
SUMMARY OF BID ACTIVITY WITH MBE AND WBE
SUBCONTRACTORS AND VENDORS
Please print or type all information,
except where a signature is required.
PROJECT:
Name of Prime Contract Bidder:
Address (Street, City, State and Zip Code):
Contact Person (Name, Title and Telephone Number):
MBE and WBE
Subcontractor/Vendor Item/ Bid Submitted: Award Status Date of
(Indicate which) Trade Date Amount Date Amount Elimination
EXPLANATION OF ELIMINATION: Include meetings held for negotiation, etc.
(Use additional sheet if necessary)
OFFICER OF FIRM:
Name and Title: Date:
Signature:
EXHIBIT "D" - FORM III
EXHIBIT "E"
LABOR RATE BREAKDOWN
PROJECT TITLE:CONTRACT NO.
CONTRACTOR:TRADE:
EFFECTIVE DATE:
EXPIRATION DATE:
Base Hourly Rate:$
Payroll Taxes and Insurance % per Hour
F.I.C.A.
Federal Unemployment (Base on 1500 hours of work)
State Unemployment (Base on 1500 hours of work)
*Worker's Compensation
*Bodity Injury & Property Damage
Disability
TOTAL %
Payroll Taxes and Insurance Rates: Base Rate (x) Total % =$
*
Supplemental Benefits $ per Hour
Vacation
Health & Welfare
Pension
Annuity
Education / Training
Industry
Total Hourly Fringe Benefits $
Hourly Labor Rate: Base Rate, Taxes/Insurance and Fringe Benefits $
Adjustment for a composite rate which includes apprentices:$
CONTRACTOR'S CERTIFICATION
Signature of Authorized Representative:
Print Name:
Print Title:
I certify that the labor rates, insurance enumerations, labor fringe enumerations and expenses are correct and in accordance
with actual and true cost incurred.
Rates are net Contractor cost after premium discounts and experience
modifications have been applied against manual rate.
THIS PAGE INTENTIONALLY LEFT BLANK
EXHIBIT "F”
STORED MATERIALS INVOICING
DOCUMENTATION
PROJECT TITLE:
CONTRACT NO.
CONTRACTOR:SUBCONTRACTOR:
REASON FOR REQUEST:
APPLICATION FOR PAYMENT NO. __________DATE:
1 Material Identification
Description:
Quantity:
Provide Specific Location of Materials Stored:
2 Material Value
Attach an Invoice or Quantified Statement of Value.$
3 Certificate of Insurance
Attach a Certificate of Insurance for the above specified materials. Certificate shall name
"Cornell University" as a loss payee with respect to the specified materials.
4 Transfer of Title
The Contractor hereby agrees to transfer complete ownership of all listed materials to Cornell University at the
time payment is made to Contractor for the above referenced Application for Payment. The Contractor remains
responsible for all contractual requirements for the above listed materials including complete installation and
providing of all warranties.
Signed:
Date:
THIS PAGE INTENTIONALLY LEFT BLANK
EXHIBIT "G"
Contractor Performance
Evaluation
Project Information
Project Name:____________________________________________Date Of Evaluation___________________
Project Number___________________________Evaluators;
Project Team_____________________________
Campus_________________________________
Project Start Date_________________________Substantial Completion________________
Contractor______________________________________________Prequalification Status_________________
Original Contract Amount__________________________________Total Change Order Amount_____________
Contractor Project Manager___________________________________________Initial Evaluation_____
Contractor Superintendent____________________________________________Final Evaluation_____
Type Of Contract
Prime Contractor___Subcontractor___Construction Manager___
Project Comments/Description
Performance Evaluation
Please give one rating for each category. Add comments as required to justify your rating.
Fails to Achieve Needs Fully Achieve Freq Exceeds Cons Exceed
Expectation Improvement Expectation Expectation Expectation
1 2 3 4 5
1 Quality of Workmanship
Rate this contractor's performance in regards to quality of work
a. Compliance with project drawings and specifications
b. Workmanship quality and accuracy
c. Tools- quality and sufficient quantity
d. Equipment - sufficient quantity and operating condition
e. Quality of jobsite craft personnel
Comments:
2 Scheduling/Productivity
Rate this contractor's performance with regard to producing and
meeting contract schedules and milestones
a. Project schedule quality and completeness
b. Controlling of project schedule
c. Manpower allocation for maintaining schedule
d. Material deliveries to support project schedule
e. Ability to meet substantial completion date and project milestones
f. Productivity of work force
g. Ability to deal with added work and unforeseen issues.
Comments:
3 Subcontractor Management
Rate this contractor's ability, effort and success in managing and coordinating
subcontractors (if no subcontractors rate overall management performance)
Comments:
3A Major subcontractor performance(score not added in final Contractor Evaluation
For contractor information only
a. Plumbing Contractor overall Performance
Comments:
b. HVAC Contractor overall Performance
Comments:
c. Electrical Contractor overall Performance
Comments:
Fails to Achieve Needs Fully Achieve Freq Exceeds Cons Exceed
Expectation Improvement Expectation Expectation Expectation
1 2 3 4 5
4 MBE/WBE Participation
Rate this contractor's MBE/WBE solicitation effort and participation for this
project for, Project Team, Subcontractors, Material Vendors
Comments:
5 Safety
Rate this contractor's performance in regards to project safety
a. Timely submission of site specific safety program
b. Knowledge of OSHA standards
c. Implementation of safety rules and regulations
d. Promotion and creation of safety awareness
e. Daily overall housekeeping
f. Safety record
g. Response to safety concerns
h. Awareness of public safety
Comments:
6 Contract Administration
Rate this contractor's performance in regards to contract
administration as per criteria below
a. Timely submission of complet and correct
documentation required for insurance and bond
b. Change order processing
c. Timely submission of RFI's, Shop Drawings,
and change orders
d. Subcontractor payments made promptly
e. Timely submission of complete and correct payment
applications
f. Quality of paperwork
Comments:
7 Working Relationships
Rate this contractor's working relationships with other parties
(Cornell, Design Team, subcontractors,ect.)
Comments:
Fails to Achieve Needs Fully Achieve Freq Exceeds Cons Exceed
Expectation Improvement Expectation Expectation Expectation
1 2 3 4 5
8 Supervisory Personnel Rating
Rate the overall performance of this contractor's on site supervisory
personnel and project management staff
Comments:
9 Contract Close-Out
Rate this contractor's overall ability to efficiently close out the project
a. Timely completion of all punchlist items
b. Timely resolution of all outstanding change orders
c. Timely submission of all close out documents(O&M's,
As-Builts, warranties, final releases and consent of surety)
d. Quality of close out documentation and timely completion
of any outstanding audit questions
Comments:
Summary Sheet
Project:___________________________________________
Contractor:________________________________________
Rating Per Weight
Performance Categories Category %Scoring
1 Quality of Workmanship 0 15.00%0
2 Scheduling 0 10.00%0
3 Subcontractor Management 0 10.00%0
4 MBE/WBE Participation 0 10.00%0
5 Safety 0 10.00%0
6 Contract Administration 0 10.00%0
7 Working Relationships 0 10.00%0
8 On Site Supervisory Personnel Rating 0 18.00%0
9 Contract Close Out 0 7.00%0
Over All Rating 0
Rating Reference
Fails to achieve expectation 1
Needs improvement 2
Fully achieves expectation 3
Frequently exceeds expectation 4
Consistently exceeds expectation 5
OWNER COMMENTS:
OWNER COMMENTS on 3A Ratings:
CONTRACTOR COMMENTS:
(To be completed by Contractor prior to Owner/Contractor discussion meeting)
THIS PAGE INTENTIONALLY LEFT BLANK
May 21, 2019
GENERAL REQUIREMENTS
FOR
ROBERT PURCELL COMMUNITY CENTER
MAIL CENTER RENOVATION
CORNELL UNIVERSITY
ITHACA, NEW YORK
May 21, 2019
SECTION 01 11 00 SUMMARY OF WORK .....................................................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 WORK UNDER OTHER CONTRACTS .........................................................2
SECTION 01 14 00 WORK RESTRICTIONS ..................................................................1
1.0 GENERAL ....................................................................................................................1
1.1 RELATED DOCUMENTS ...............................................................................1
1.2 CONTRACTOR USE OF PREMISES ..............................................................1
1.3 UNIVERSITY CLOSURES ..............................................................................2
1.4 WATER USE RESTRICTION ..........................................................................2
1.5 PARKING ..........................................................................................................2
1.6 CHANGEOVERS AND CONTINUITY OF SERVICES ................................3
1.7 OBSTACLES, INTERFERENCE AND COORDINATION ............................4
1.8 EQUIPMENT ARRANGEMENTS...................................................................4
1.9 EXISTING EQUIPMENT, MATERIALS, FIXTURES, ETC. ........................5
1.10 EXAMINATION OF PREMISES, DRAWINGS, ETC. ...................................5
1.11 STAND DOWN DATES ...................................................................................6
1.12 WORKING HOURS ..........................................................................................6
2.0 PRODUCTS – NOT USED .........................................................................................6
3.0 EXECUTION – NOT USED .......................................................................................6
SECTION 01 25 00 SUBSTITUTIONS AND PRODUCT OPTIONS .............................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 DEFINITIONS ...................................................................................................1
1.3 ACTION SUBMITTALS ..................................................................................2
1.4 PRODUCTS LIST .............................................................................................2
1.5 QUALITY ASSURANCE .................................................................................2
1.6 PROCEDURES..................................................................................................3
1.7 EQUIVALENTS – APPROVED EQUAL ........................................................3
1.8 CONTRACTOR'S OPTIONS ............................................................................4
1.9 SUBSTITUTIONS .............................................................................................6
1.10 COMPARABLE PRODUCTS ..........................................................................7
1.11 CONTRACTOR'S REPRESENTATION ..........................................................8
1.12 ARCHITECT'S DUTIES ...................................................................................8
2.0 PRODUCTS – NOT USED .........................................................................................8
3.0 EXECUTION – NOT USED .......................................................................................8
May 21, 2019
SECTION 01 31 19 PROJECT MEETINGS ......................................................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 PRE-CONSTRUCTION MEETING .................................................................1
1.3 PROGRESS MEETINGS ..................................................................................3
1.4 PRE-INSTALLATION CONFERENCE(S) ......................................................4
2.0 PRODUCTS – NOT USED .........................................................................................4
3.0 EXECUTION – NOT USED .......................................................................................4
SECTION 01 31 50 ELECTRONIC PROJECT MANAGEMENT .................................1
1.0 GENERAL ....................................................................................................................1
1.1 SUMMARY .......................................................................................................1
1.2 RELATED SECTIONS .....................................................................................1
1.3 DEFINITIONS ...................................................................................................1
1.4 PROCEDURES..................................................................................................1
1.5 PROCESS OVERVIEW ....................................................................................2
1.6 ADDITIONAL INFORMATION ......................................................................4
2.0 PRODUCTS – NOT USED .........................................................................................4
3.0 EXECUTION – NOT USED .......................................................................................4
SECTION 01 32 16 CONSTRUCTION SCHEDULE .......................................................1
1.0 GENERAL ....................................................................................................................1
1.1 SUMMARY .......................................................................................................1
1.2 FORM OF SCHEDULES ..................................................................................1
1.3 CONTENT OF SCHEDULES ...........................................................................1
1.4 PROGRESS REVISIONS .................................................................................2
1.5 SUBMISSIONS .................................................................................................3
2.0 PRODUCTS - NOT USED ..........................................................................................3
3.0 EXECUTION ...............................................................................................................3
3.1 DISTRIBUTION................................................................................................3
SECTION 01 32 33 PHOTOGRAPHIC DOCUMENTATION ........................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 SUBMITTALS ..................................................................................................1
2.0 PRODUCTS – NOT USED .........................................................................................1
3.0 EXECUTION ...............................................................................................................1
3.1 EXISTING CONDITION PHOTOGRAPHS ....................................................1
3.2 PROGRESS PHOTOGRAPHS .........................................................................1
3.3 FINAL COMPLETION PHOTOGRAPHS .......................................................1
May 21, 2019
SECTION 01 33 00 SUBMITTAL PROCEDURES ..........................................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 SUBMITTAL REGISTRY AND SCHEDULE.................................................1
1.3 SHOP DRAWINGS ...........................................................................................3
1.4 PRODUCT DATA .............................................................................................3
1.5 SAMPLES..........................................................................................................4
1.6 QUALITY ASSURANCE AND QUALITY CONTROL SUBMITTALS.......5
1.7 CONTRACTOR RESPONSIBILITIES ............................................................5
1.8 SUBMITTAL PROCEDURES ..........................................................................7
1.9 RECORD SUBMITTALS .................................................................................8
1.10 RESUBMISSION REQUIREMENTS ..............................................................9
1.11 ARCHITECT'S DUTIES ...................................................................................9
1.12 DISTRIBUTION..............................................................................................10
2.0 PRODUCTS – NOT USED .......................................................................................10
3.0 EXECUTION – NOT USED .....................................................................................10
SECTION 01 35 29 GENERAL HEALTH & SAFETY ....................................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 CONTRACTOR’S PROJECT SITE SPECIFIC PLAN ....................................1
1.3 ASBESTOS........................................................................................................2
1.4 LEAD .................................................................................................................3
1.5 SITE VISITS ......................................................................................................3
1.6 CONFINED SPACE ..........................................................................................3
2.0 PRODUCTS – NOT USED .........................................................................................3
3.0 EXECUTION – NOT USED .......................................................................................3
May 21, 2019
SECTION 01 35 43 GENERAL ENVIRONMENTAL REQUIREMENTS ....................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 RELATED SECTIONS .....................................................................................1
1.3 SUBMITTALS ..................................................................................................1
1.4 JOB SITE ADMINISTRATION .......................................................................1
1.5 CLEARING, SITE PREPARATION AND SITE USE .....................................2
1.6 NOISE AND VIBRATION ...............................................................................2
1.7 DUST CONTROL .............................................................................................2
1.8 PROTECTION OF THE ENVIRONMENT .....................................................3
1.9 TEMPORARY RE-ROUTING OF PIPING AND DUCTWORK ....................3
1.10 HAZARDOUS OR TOXIC MATERIALS .......................................................3
1.11 DISPOSAL OF WASTE MATERIAL AND TITLE ........................................4
2.0 PRODUCTS – NOT USED .........................................................................................4
3.0 EXECUTION – NOT USED .......................................................................................4
SECTION 01 35 44 SPILL CONTROL ..............................................................................1
1.0 GENERAL ....................................................................................................................1
1.1 SPILL PREVENTION .......................................................................................1
1.2 SPILL CONTROL PROCEDURES ..................................................................1
1.3 SPILL REPORTING AND DOCUMENTATION ............................................4
2.0 PRODUCTS – NOT USED .........................................................................................5
3.0 EXECUTION – NOT USED .......................................................................................5
SECTION 01 41 00 REGULATORY REQUIREMENTS ................................................1
1.0 GENERAL ....................................................................................................................1
1.1 PERMITS AND LICENSES .............................................................................1
1.2 INSPECTIONS ..................................................................................................1
1.3 COMPLIANCE..................................................................................................1
1.4 OWNER’S REQUIREMENTS .........................................................................2
2.0 PRODUCTS – NOT USED .........................................................................................2
3.0 EXECUTION – NOT USED .......................................................................................2
May 21, 2019
SECTION 01 42 00 REFERENCES ....................................................................................1
1.0 GENERAL ....................................................................................................................1
1.1 INTENT OF CONTRACT DOCUMENTS.......................................................1
1.2 RELATED DOCUMENTS ...............................................................................2
1.3 DEFINITIONS ...................................................................................................2
1.4 OWNER AGREEMENTS .................................................................................4
1.5 INDUSTRY STANDARDS ..............................................................................4
1.6 ABBREVIATIONS AND ACRONYMS ..........................................................5
2.0 PRODUCTS - NOT USED ........................................................................................17
3.0 EXECUTION - NOT USED ......................................................................................17
SECTION 01 45 00 QUALITY CONTROL .......................................................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 CONTROL OF ON-SITE CONSTRUCTION ..................................................1
1.3 CONTROL OF OFF-SITE OPERATIONS.......................................................2
1.4 TESTING ...........................................................................................................3
1.5 OWNER'S REPRESENTATIVE ......................................................................3
2.0 PRODUCTS – NOT USED .........................................................................................3
3.0 EXECUTION – NOT USED .......................................................................................3
SECTION 01 50 00 TEMPORARY FACILITIES AND CONTROLS ...........................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 REQUIREMENTS OF REGULATORY AGENCIES ......................................1
2.0 PRODUCTS..................................................................................................................1
2.1 MATERIALS, GENERAL ................................................................................1
2.2 TEMPORARY FIRST AID FACILITIES.........................................................1
2.3 TEMPORARY FIRE PROTECTION ...............................................................1
2.4 CONSTRUCTION AIDS ..................................................................................3
2.5 SUPPORTS ........................................................................................................3
2.6 TEMPORARY ENCLOSURES ........................................................................4
2.7 TEMPORARY WATER CONTROL ................................................................5
2.8 PERSONNEL, PUBLIC AND EMPLOYEE PROTECTION ..........................5
2.9 ACCESS ROADS AND PARKING AREAS ...................................................5
2.10 PROJECT IDENTIFICATION AND SIGNS ...................................................5
2.11 SECURITY ........................................................................................................5
2.12 FIELD OFFICES ...............................................................................................6
3.0 EXECUTION ...............................................................................................................6
3.1 PREPARATION ................................................................................................6
3.2 GENERAL .........................................................................................................6
3.3 REMOVAL ........................................................................................................6
May 21, 2019
SECTION 01 51 00 TEMPORARY UTILITIES ...............................................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 REQUIREMENTS OF REGULATORY AGENCIES ......................................1
2.0 PRODUCTS..................................................................................................................1
2.1 MATERIALS, GENERAL ................................................................................1
2.2 TEMPORARY ELECTRICITY, LIGHTING AND WATER ..........................1
2.3 TEMPORARY USE OF ELEVATOR ..............................................................2
2.4 TEMPORARY CONTRACTOR TELEPHONE SERVICE .............................3
2.5 TEMPORARY SANITARY FACILITIES .......................................................3
3.0 EXECUTION ...............................................................................................................3
3.1 REMOVAL ........................................................................................................3
SECTION 01 51 23 HEAT DURING CONSTRUCTION .................................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 RESPONSIBILITY............................................................................................1
2.0 PRODUCTS – NOT USED .........................................................................................1
3.0 EXECUTION – NOT USED .......................................................................................1
SECTION 01 66 00 STORAGE AND PROTECTION ......................................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 TRANSPORTATION AND HANDLING ........................................................1
1.3 ON-SITE STORAGE.........................................................................................1
1.4 PALM ROAD STORAGE .................................................................................2
1.5 PROTECTION ...................................................................................................3
1.6 PROTECTION AFTER INSTALLATION .......................................................4
2.0 PRODUCTS – NOT USED .........................................................................................4
3.0 EXECUTION – NOT USED .......................................................................................4
May 21, 2019
SECTION 01 73 29 CUTTING, PATCHING AND REPAIRING ...................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 SUBMITTALS ..................................................................................................2
1.3 QUALITY ASSURANCE .................................................................................2
1.4 WARRANTIES .................................................................................................4
2.0 PRODUCTS..................................................................................................................4
2.1 MATERIALS .....................................................................................................4
3.0 EXECUTION ...............................................................................................................4
3.1 INSPECTION ....................................................................................................4
3.2 PREPARATION ................................................................................................5
3.3 PERFORMANCE ..............................................................................................5
3.4 CLEANING .......................................................................................................7
SECTION 01 77 00 PROJECT CLOSEOUT .....................................................................1
1.0 GENERAL ....................................................................................................................1
1.1 INSPECTIONS ..................................................................................................1
1.2 SUBMITTALS ..................................................................................................2
1.3 FINAL CLEAN UP ...........................................................................................3
1.4 MAINTENANCE STOCK ................................................................................4
2.0 PRODUCTS – NOT USED .........................................................................................4
3.0 EXECUTION – NOT USED .......................................................................................4
SECTION 01 78 22 FIXED EQUIPMENT INVENTORY ...............................................1
1.0 GENERAL ....................................................................................................................1
1.1 FIXED EQUIPMENT INVENTORY ...............................................................1
2.0 PRODUCTS – NOT USED .........................................................................................2
3.0 EXECUTION – NOT USED .......................................................................................2
May 21, 2019
SECTION 01 78 23 OPERATING AND MAINTENANCE DATA .................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 FORM OF SUBMITTALS ................................................................................1
1.3 CONTENT OF MANUAL ................................................................................2
1.4 MANUAL FOR MATERIALS AND FINISHES .............................................3
1.5 MANUAL FOR EQUIPMENT AND SYSTEMS ............................................4
1.6 SUBMITTAL REQUIREMENTS .....................................................................6
1.7 INSTRUCTIONS OF OWNER'S PERSONNEL ..............................................6
1.8 OPERATING INSTRUCTIONS .......................................................................7
2.0 PRODUCTS – NOT USED .........................................................................................7
3.0 EXECUTION – NOT USED .......................................................................................7
SECTION 01 78 36 WARRANTIES AND BONDS ...........................................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 SUMMARY .......................................................................................................1
1.3 DEFINITIONS ...................................................................................................1
1.4 QUALITY ASSURANCE .................................................................................2
1.5 WARRANTY REQUIREMENTS.....................................................................2
1.6 SUBMITTAL REQUIREMENTS .....................................................................3
1.7 SUBMITTALS REQUIRED .............................................................................4
2.0 PRODUCTS – NOT USED .........................................................................................4
3.0 EXECUTION ...............................................................................................................4
3.1 FORM OF SUBMITTALS ................................................................................4
3.2 TIME OF SUBMITTALS .................................................................................5
SECTION 01 78 39 RECORD DOCUMENTS...................................................................1
1.0 GENERAL ....................................................................................................................1
1.1 DESCRIPTION..................................................................................................1
1.2 MAINTENANCE OF DOCUMENTS AND SAMPLES..................................1
1.3 RECORDING ....................................................................................................1
1.4 SUBMITTAL .....................................................................................................3
2.0 PRODUCTS – NOT USED .........................................................................................4
3.0 EXECUTION – NOT USED .......................................................................................4
CORNELL UNIVERSITY SECTION 01 11 00
Ithaca, New York SUMMARY OF THE WORK
RPCC MAIL CENTER SUMMARY OF WORK 01 11 00-1
RENOVATION May 21, 2019
SECTION 01 11 00 SUMMARY OF WORK
1.0 GENERAL
1.1 DESCRIPTION
A. Work to be Done
1. Renovation of the Robert Purcell Community Center Mail Room and supporting
offices.
2. Demolish existing ceilings, carpet / flooring, lights. Selective demolition of partitions
and doors. Selective demolition of M/E/P and fire protection systems.
3. New walls, doors and finishes. New ceiling, lighting and fire protection layout for
reconfigured space.
4. New mechanical / electrical / fire protection layout for renovated mailroom.
Modifications to existing mechanical system to provide improved airflow.
5. New signage, reception desk and security grate.
B. The Scope of the Work
1. The scope of the WORK in all SECTIONS of this Specification shall consist of the
furnishing of all labor, materials, equipment and appliances and the performance of the
Work required by the Contract Documents and/or by the conditions at the site, joining
all parts of this Work with itself and the Work of others to form a complete, functioning
entity.
2. Items not specifically mentioned in the Specifications or shown on the drawings, but
which are inherently necessary to make a complete working installation, shall be
included.
3. It is the intent and purpose of the Contract Documents to cover and include under each
item all materials, machinery, apparatus, and labor necessary to properly install
materials and equipment, adjust and put into perfect operation the respective portions
of the installation specified and to so interconnect the various items or sections of the
work as to form a complete and operating whole. Any equipment, apparatus,
machinery, material and small items not mentioned in detail, and labor not hereinafter
specifically mentioned, which may be found necessary to complete or perfect any
portion of the installation in a substantial manner, and in compliance with the
requirements stated, implied, or intended in the Contract Documents, shall be furnished
without extra cost to the Owner. The Contractor shall provide the greatest quantity,
highest quality, highest degree of safety, and most stringent material, equipment or
Work. Should the Drawings or the Specifications disagree in themselves or with each
other, the Contractor shall provide the better quality or greater quantity of work and/or
materials unless otherwise directed by written addendum to the Contract.
CORNELL UNIVERSITY SECTION 01 11 00
Ithaca, New York SUMMARY OF THE WORK
RPCC MAIL CENTER SUMMARY OF WORK 01 11 00-2
RENOVATION May 21, 2019
1.2 WORK UNDER OTHER CONTRACTS
A. The Contractor shall cooperate with other contracts performing related work, including
providing labor, materials and other costs necessary to satisfactorily coordinate the Contract
work with work performed under others contracts.
B. Concurrent / Future Work:
1. Owner’s hired asbestos sampling tech will sample the back panel of the reception desk
when demolition commences. Contractor shall assist in removal of the back panel, and
will keep it onsite until testing results are received.
***END OF SECTION 01 11 00***
CORNELL UNIVERSITY SECTION 01 14 00
Ithaca, New York WORK RESTRICTIONS
RPCC MAIL CENTER WORK RESTRICTIONS 01 14 00-1
RENOVATION May 21, 2019
SECTION 01 14 00 WORK RESTRICTIONS
1.0 GENERAL
1.1 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General Conditions and Division
1 Specification Sections, apply to this Section.
1.2 CONTRACTOR USE OF PREMISES
A. All traffic and pedestrian control measures shall be compliant with the National Manual on
Uniform Traffic Control Devices for Streets and Highways (MUTCD) and 17 NYCRR
Chapter V (New York Supplement), (https://www.dot.ny.gov/mutcd) and all other local laws
and regulations.
B. The Contractor shall carry on the Work in the manner which will cause the least interruption
to pedestrian and vehicular traffic and permit access of emergency vehicles at all times.
C. The Work shall be scheduled and performed in such a manner that at least one lane of traffic
will be maintained on all public streets. Two flag persons, equipped with radio
communication devices, must be provided for any activity blocking a traffic lane. One lane
of traffic must be maintained at all times. Where traffic must cross open trenches, the
Contractor shall provide suitable bridges and railings; including pedestrian bridges.
D. The Contractor shall maintain 20’ minimum fire lane access to all facilities in the area.
E. The Contractor shall post and maintain flag persons and suitable signs indicating that
construction operations are under way and other warning signs as may be required.
F. The Contractor shall safeguard the use by the public and Owner of all adjacent highways,
roadways and footpaths, outside the Contract Limit Lines (work area), and shall conform to
all laws and regulations concerning the use thereof, especially limitations on traffic and the
movement of heavy equipment. Access to the site for delivery of construction materials
and/or equipment shall be made only at the locations shown in the Contract Documents or
approved by the Owner’s Representative.
G. The Contractor shall make every effort to keep dirt and debris from making its way to
roadways. The Contractor shall immediately remove dirt and debris which may collect on
permanent roadways due to the Work.
H. The Contractor shall limit the extent of its activities to that area of the site defined on the
Contract Drawings as being within the Contract Limit Lines.
CORNELL UNIVERSITY SECTION 01 14 00
Ithaca, New York WORK RESTRICTIONS
RPCC MAIL CENTER WORK RESTRICTIONS 01 14 00-2
RENOVATION May 21, 2019
I. For that portion of the Work required under this Contract which must be performed in other
than the defined areas both on-site and off, including operations involving delivery and
removal of materials, the Contractor shall schedule and coordinate its activities through the
Owner's Representative, to meet the approval of the Owner and minimize disruption of the
normal scheduled activities of the occupants of adjacent spaces.
J. It is the Owner’s expectation that the Contractor will take protective measures to minimize
damage caused by construction activities including, but not limited to, the use of personnel
lifts, material handling equipment, on-site material storage, etc. All portions of the site,
including the staging area and those areas affected by the work, shall be returned to their
original condition after completion of Work. Such repair work shall include lawn restoration
and reseeding, if required, and shall be included in the Contractor's Guarantee of Work.
K. Routes to and from the location of the Work shall be as indicated in the Contract or as directed
by the Owner's Representative. Temporary roadways shall be closed only with prior approval
of the Owner's Representative.
1.3 UNIVERSITY CLOSURES
A. In the event of University closure, the Contractor should use their judgement, follow their
internal guidance on continuity of operations, and the direction of law enforcement, as to
whether or not they will maintain operations on construction sites on campus. They should
make this decision with the awareness that Cornell response to any project needs (shutdowns,
emergencies) will not possible and the maintenance of roads and walks will not be to normal
operating standards.
B. With your safety as a top priority, the Cornell University Police allows you the ability to take
advantage of our Emergency Mass Notification System that enables your cellphone to
become a personal safety device for you. Contractor’s wishing to participate may text the
following: CornellAlert to 67283 and you will be set up to receive alert messages. Be advised
that you may stop receiving messages at any time by sending “stop” to CornellAlert. There
will also be a system generated “stop” every year on August 1st at which point you will need
to send the text CornellAlert to re-enlist.
1.4 WATER USE RESTRICTION
A. The Contractor shall adhere to any University issued Water Use Restrictions in place at the
time of construction.
1.5 PARKING
A. The Owner may designate an area for parking of essential Contractor vehicles on the project
site. One (1) parking space is available for contractor parking at Mary Donlon Hall. A permit
is required for this location, at $115/month.
1. Additional staff parking is available at the Palm Road / Salidago Road parking lot.
Vehicles utilizing this lot must be registered with the Cornell University Parking &
Transportation Office at 116 Maple Avenue.
CORNELL UNIVERSITY SECTION 01 14 00
Ithaca, New York WORK RESTRICTIONS
RPCC MAIL CENTER WORK RESTRICTIONS 01 14 00-3
RENOVATION May 21, 2019
B. The Contractor shall make all arrangements, and bear the cost, for transportation of all trade
persons from the designated parking area to the construction site as necessary.
C. It should be noted that there is a fee for all parking on the Cornell University campus. The
Contractor is responsible for the payment for all parking costs imposed by the Owner. The
Contractor should contact the Project Manager (Michael Stewart, 607-255-7441) for
additional information. The Contractor will be required to complete a “New Construction
Employee Form” for each permit requested. This form may be found at
http://finance.fs.cornell.edu/contracts/forms/contractors.cfm.
D. Contractor shall cooperate with Transportation Services and/or other authorities having
jurisdiction, as follows:
1. Ensure parking by all employees of the Contractor, subcontractors, material suppliers,
and others connected with this project only within construction fence or the designated
parking area.
2. Prohibit employees from parking in any other areas, roads, streets, grounds, etc.
3. Discharge any employee refusing to comply with these requirements.
4. Ensure proper transportation of personnel between the designated parking area and the
construction site.
E. The Contractor shall remove from the parking area and staging area all temporary trailers,
rubbish, unused materials, and other materials belonging to the Contractor or used under the
Contractor’s direction during construction or impairing the use or appearance of the property
and shall restore such areas affected by the work to their original condition, and, in the event
of its failure to do so, the same shall be removed by the Owner at the expense of the
Contractor, and the Contractor shall be liable therefore.
1.6 CHANGEOVERS AND CONTINUITY OF SERVICES
A. Make all changeovers, tie-ins and removals, etc., of any part of the Work that would affect
the continuity of operation of the adjacent services at approved times that will not interfere
with the Owner's operations. Secure approval of Owner before proceeding.
B. Make all necessary temporary connections required to permit operation of the building
services and/or equipment. Remove the connections after need has ceased.
C. The Contractor may be permitted to make changeovers during normal working hours at the
Owner’s discretion. Should the Contractor perform this Work outside of normal working
hours, no extra payment will be made for resulting overtime expenses.
D. When connecting new facilities do not shut off any existing Mechanical/Electrical facilities
or services without prior written approval of Owner's Representative.
E. The Contractor shall not, except in an emergency condition, shutdown any utility without the
express permission of the Owner's Representative. Major, affecting life safety or outside
contract limit lines, shutdowns of utilities will be performed by Cornell University to enable
Contractor to perform required work. Major shutdowns shall be defined as those affecting
life safety or which are outside the project site limits.
CORNELL UNIVERSITY SECTION 01 14 00
Ithaca, New York WORK RESTRICTIONS
RPCC MAIL CENTER WORK RESTRICTIONS 01 14 00-4
RENOVATION May 21, 2019
F. Maintain domestic water and firewater in service at all times. No service may be out for more
than twenty-four (24) hours. Maintain firewater flow capability (hose, if necessary) to all
buildings and coordinate with Cornell Utilities, Cornell Environmental Health and Safety
(EH&S), and City of Ithaca Fire Department.
G. All shutdowns to be scheduled a minimum of seven (7) calendar days in advance and requests
shall be submitted via ePM system to the Owner’s Representative.
H. IN THE EVENT OF AN EMERGENCY WHERE THE OWNER'S REPRESENTATIVE IS
NOT AVAILABLE, THE CONTRACTOR SHALL DIAL 911 IMMEDIATELY.
1.7 OBSTACLES, INTERFERENCE AND COORDINATION
A. General
1. Plans show general design arrangement. Install work substantially as indicated and
verify exact location and elevations; DO NOT SCALE PLANS.
2. Due to small scale of Drawings, it is not possible to indicate all offsets, fittings, changes
in elevations, interferences, etc. Make necessary changes in the Work, equipment
locations, etc., after notification to the Owner's Representative and Architect. Obtain
approval from same, as part of Contract, to accommodate work to obstacles and
interferences encountered.
3. Obtain written approval for all major changes before installing. If requested, submit
drawings, detailing all such deviations or changes.
4. Exposed to view mechanical units, ductwork, conduit, pipes or other building
equipment are essential parts of the artistic effect of the building design and shall be
installed in locations as shown on the drawings. Conformance to given dimensions and
alignments with the structural system, walls, openings, indicated centerlines are a
requirement of the Contract and the Contractor shall familiarize himself with the critical
nature of proper placement of these items. The Contractor shall notify the Architect of
conflicts which would cause such equipment to be installed in locations other than as
indicated on the Drawings. The Contractor shall not proceed with the installation of
exposed to view mechanical units, ductwork, conduit, pipes, etc. until all conflicts have
been identified by the Contractor and resolutions to conflicts approved by the Architect.
B. Interference
1. Install work so that all items are operable and serviceable and avoid interfering with
removal of rails, filters, belt guards and/or operation of doors, etc. Provide easy and
safe access to valves, controllers, motor starters and other equipment requiring frequent
attention.
1.8 EQUIPMENT ARRANGEMENTS
A. Since all equipment of equal capacity is not necessarily of same arrangement, size of
construction, these Plans are prepared on basis of one manufacturer as "basis-of-design
equipment", even though other manufacturers' names are mentioned.
CORNELL UNIVERSITY SECTION 01 14 00
Ithaca, New York WORK RESTRICTIONS
RPCC MAIL CENTER WORK RESTRICTIONS 01 14 00-5
RENOVATION May 21, 2019
B. If Contractor elects to use specified equipment other than "design equipment" which differs
in arrangement, size, etc., the Contractor does so subject to following conditions:
1. Submit detailed drawings indicating proposed installations of equipment and showing
maintenance and service space required.
2. If revised arrangement meets approval, make all required changes in the work of all
trades, including but not limited to louvers, panels, structural supports, pads, etc. at no
increase in Contract. Provide larger motors and any additional control devices, valves,
fittings and other miscellaneous equipment required for proper operation of revised
layout, and assumes responsibility for proper location of roughing in and connections
by other trades.
3. If revised arrangement does not meet approval because of increase in pressure loss,
possibility of increase in noise, lack of space or headroom, insufficient clearance for
removal of parts, or for any other reason, provide equipment which conforms to
Contract Drawings and Specifications.
1.9 EXISTING EQUIPMENT, MATERIALS, FIXTURES, ETC.
A. Where existing equipment, piping, fittings, etc. are to be removed, Contractor shall submit
complete list to Owner. All items that Owner wishes to retain shall be carefully removed and
salvaged and delivered to building storage where directed by Owner. Items that Owner does
not wish to retain shall be removed from the site and legally disposed.
1.10 EXAMINATION OF PREMISES, DRAWINGS, ETC.
A. Before Submitting Proposal
1. Examine all Drawings and Specifications relating to Work of all trades to determine
scope and relation to other work.
2. Examine all existing conditions affecting compliance with Plans and Specifications, by
visiting site and/or building.
3. Ascertain access to site, available storage and delivery facilities.
B. Before Commencing Work on Any Phase or in any Area
1. Verify all governing dimensions at site and/or building.
2. Inspect all adjacent work.
C. Tender of Proposal Confirms Agreement
1. All items and conditions referred to herein and/or indicated on accompanying
Drawings.
2. No consideration, additional monies or time extensions will be granted for alleged
misunderstanding.
CORNELL UNIVERSITY SECTION 01 14 00
Ithaca, New York WORK RESTRICTIONS
RPCC MAIL CENTER WORK RESTRICTIONS 01 14 00-6
RENOVATION May 21, 2019
D. Existing or Archived Drawings
1. Existing or Archived drawings of impacted buildings are appended in electronic format
only for reference and informational purposes. These historic drawings are not to be
considered contract drawings and are provided “FOR INFORMATION ONLY”. The
Owner makes no representation as to the accuracy of the drawings as representing
current conditions.
1.11 STAND DOWN DATES
A. Strict and effective enforcement by Contractor’s management and supervision of the
following dates and hours is required.
1.12 WORKING HOURS
A. Normal work hours are 7AM-dusk Monday-Saturday except during above noted restrictions.
This means that Contractor shall not permit any noise generating activities that could disturb
campus occupants or residents to take place outside of these hours. Should any conditions
necessitate work to extend beyond these hours – Contractor may submit a detailed request
with reasonable advance notice to Cornell. Cornell (at its sole discretion) may issue a written
relaxation of the above but Contractor is advised never to assume that it will be granted.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 14 00**
CORNELL UNIVERSITY SECTION 01 25 00
Ithaca, New York SUBSTITUTIONS AND PRODUCT OPTIONS
RPCC MAIL CENTER SUBSTITUTIONS AND PRODUCT OPTIONS 01 25 00-1
RENOVATION May 21, 2019
SECTION 01 25 00 SUBSTITUTIONS AND PRODUCT OPTIONS
1.0 GENERAL
1.1 DESCRIPTION
A. The Contractor shall furnish and install the products specified, under the options and
conditions for substitutions stated in this Section.
1.2 DEFINITIONS
A. Substitutions: Changes in products, materials, equipment, and methods of construction from
those required by the Contract Documents and proposed by Contractor.
1. Substitutions for Cause: Changes proposed by Contractor that are required due to
changed Project conditions that are beyond the Contractor’s control, such as
unavailability of product, or regulatory changes.
a. Products that are not available from Contractor’s preferred suppliers does not
constitute unavailability of product.
2. Substitutions for Convenience: Changes proposed by Contractor or Owner that are not
required in order to meet other Project requirements but may offer advantage to
Contractor or Owner.
B. Products: Items obtained for incorporating into the Work, whether purchased for Project or
taken from previously purchased stock. The term "product" includes the terms "material,"
"equipment," "system," and terms of similar intent.
1. Named Products: Items identified by manufacturer's product name, including make or
model number or other designation shown or listed in manufacturer's published product
literature that is current as of date of the Contract Documents.
2. New Products: Items that have not previously been incorporated into another project
or facility. Items salvaged from other projects are not considered new products. Items
that are manufactured or fabricated to include recycled content materials are considered
new products, unless indicated otherwise.
3. Comparable Product: Product that is demonstrated and approved through submittal
process to have the indicated qualities related to type, function, dimension, in-service
performance, physical properties, appearance, and other characteristics that equal or
exceed those of specified product.
CORNELL UNIVERSITY SECTION 01 25 00
Ithaca, New York SUBSTITUTIONS AND PRODUCT OPTIONS
RPCC MAIL CENTER SUBSTITUTIONS AND PRODUCT OPTIONS 01 25 00-2
RENOVATION May 21, 2019
C. Basis-of-Design Product Specification: A specification in which a specific manufacturer's
product is named and accompanied by the words "basis-of-design product," including make
or model number or other designation, to establish the significant qualities related to type,
function, dimension, in-service performance, physical properties, appearance, and other
characteristics for purposes of evaluating comparable products of additional manufacturers
named in the specification.
1.3 ACTION SUBMITTALS
A. Substitution Requests: Submit indicated number of copies of each Substitution Request
Form, attached hereto, for consideration. Identify product or fabrication or installation
method to be replaced. Include Specification Section number and title and Drawing numbers
and titles.
1. In addition to submission of Substitution Request Form, substitutions shall be listed on
the Bid Form with description, specification references, and corresponding change in
base bid
1.4 PRODUCTS LIST
A. Within thirty (30) days after the award of Contract, submit to the Architect five copies of a
complete list of products which are proposed for installation.
B. Tabulate the products by listing under each specification section title and number.
C. For products specified only by reference standards, list for each such product:
1. Name and address of the manufacturer.
2. Trade name.
3. Model or catalog designation.
4. Manufacturer's data:
a. Reference standards.
b. Performance test data.
1.5 QUALITY ASSURANCE
A. Compatibility of Substitutions: Investigate and document compatibility of proposed
substitution with related products and materials. Engage a qualified testing agency to perform
compatibility tests recommended by manufacturers.
B. Compatibility of Options: If Contractor is given option of selecting between two or more
products for use on Project, select product compatible with products previously selected, even
if previously selected products were also options.
1. Contractor is responsible for providing products and construction methods compatible
with other products and construction methods.
CORNELL UNIVERSITY SECTION 01 25 00
Ithaca, New York SUBSTITUTIONS AND PRODUCT OPTIONS
RPCC MAIL CENTER SUBSTITUTIONS AND PRODUCT OPTIONS 01 25 00-3
RENOVATION May 21, 2019
2. If a dispute or compatibility issue arises over concurrently selectable but incompatible
products, Architect will determine which products shall be used.
1.6 PROCEDURES
A. Coordination: Modify or adjust affected work as necessary to integrate work of accepted
substitutions and approved comparable products.
1.7 EQUIVALENTS – APPROVED EQUAL
A. Equivalents or Approvals - General
1. The words “similar and equal to”, or “or equal”, “equivalent” and such other words of
similar content and meaning shall for the purposes of this Contract be deemed to mean
similar or equivalent to one of the named products. For the purposes of Paragraph A
and B of this Section 1.4 and for the purposes of Bidding Documents, the word
“products” shall be deemed to include the words “articles”, “materials”, “items”,
“equipment” and “methods”. Whenever in the Contract documents one or more
products are specified, the words “similar and equal to” shall be deemed inserted.
2. Whenever any product is specified in the Contract documents by a reference to the
name, trade name, make or catalog number of any manufacturer or supplier, the intent
is not to limit competition, but to establish a standard of quality which the Architect has
determined is necessary for the Project. The Contractor may at its option use any
product other than that specified in the Contract Documents provided the same is
approved by the Architect in accordance with the procedures set forth in Paragraph B
of this Section 1.4. In all cases the Architect shall be the sole judge as to whether a
proposed product is to be approved and the Contractor shall have the burden of proving,
at its own cost and expense, to the satisfaction of the Architect, that the proposed
product is similar and equal to the named product. In making such determination the
Architect may establish such objective and appearance criteria as it may deem proper
that the proposed product must meet in order for it to be approved.
3. Nothing in the Contract Documents shall be construed as representing, expressly or
implied, that the named product is available or that there is or there is not a product
similar and equal to any of the named products and the Contractor shall have and make
no claim by reason of the availability or lack of availability of the named product or of
a product similar and equal to any named product.
4. The Contractor shall have and make no claim for an extension of time or for damages
by reason of the time taken by the Architect or by reason of the failure of the Architect
to approve a product proposed by the Contractor.
5. Request for approval of proposed equivalents will be received by the Architect only
from the Contractor.
CORNELL UNIVERSITY SECTION 01 25 00
Ithaca, New York SUBSTITUTIONS AND PRODUCT OPTIONS
RPCC MAIL CENTER SUBSTITUTIONS AND PRODUCT OPTIONS 01 25 00-4
RENOVATION May 21, 2019
B. Equivalents or Approvals After Bidding
1. Request for approval of proposed equivalents will be considered by the Architect after
bidding only in the following cases: (a) the named product cannot be obtained by the
Contractor because of strikes, lockouts, bankruptcies or discontinuance of manufacturer
and the Contractor makes a written request to the Architect for consideration of the
proposed equivalent within ten (10) calendar days of the date it ascertains it cannot
obtain the named product; or (b) the proposed equivalent is superior, in the opinion of
the Architect, to the named product; or (c) the proposed equivalent, in the opinion of
the Architect, is equal to the named product and its use is to the advantage of the Owner,
e.g., the Owner receives an equitable credit, acceptable to it, as a result of the estimated
cost savings to the Contractor from the use of the proposed equivalent or the Owner
determines that the Contractor has not failed to act diligently in placing the necessary
purchase orders and a savings in the time required for the completion of the construction
of the Project should result from the use of the proposed equivalent; or (d) the proposed
equivalent, in the opinion of the Architect, is equal to the named product and less than
ninety (90) calendar days have elapsed since the Notice of Award of the Contract.
2. Where the Architect pursuant to the provisions of this Section 1.4 approves a product
proposed by the Contractor and such proposed product requires a revision or redesign
of any part of the work covered by this Contract, all such revision and redesign and all
new Drawings and details required therefore shall be subject to approval of the
Architect and shall be provided by the Contractor at its own cost and expense.
3. Where the Architect pursuant to the provisions of this Section approves a product
proposed by the Contractor and such proposed product requires a different quantity
and/or arrangement of duct work, piping, wiring, conduit or any other part of the work
from that specified, detailed or indicated in the Contract Documents, the contractor shall
provide the same at its own cost and expense.
1.8 CONTRACTOR'S OPTIONS
A. For products specified only by reference standard, select any product meeting that standard,
by any manufacturer.
B. For products specified by naming several products or manufacturers, select any one of
products and manufacturers named.
1. Products:
a. Restricted List (Products): Where Specifications include paragraphs or
subparagraphs titled “Products” or that include the phrase “provide one of the
following”, and include a list of names of both manufacturers and products,
provide one of the products listed that complies with requirements. Comparable
products for Contractor's convenience will not be considered.
- Substitutions may be considered, unless otherwise indicated.
CORNELL UNIVERSITY SECTION 01 25 00
Ithaca, New York SUBSTITUTIONS AND PRODUCT OPTIONS
RPCC MAIL CENTER SUBSTITUTIONS AND PRODUCT OPTIONS 01 25 00-5
RENOVATION May 21, 2019
b. Non-restricted List (Available Products): Where Specifications include
paragraphs or subparagraphs titled “Available Products” or that include the phrase
“include, but are not limited to, the following”, and include a list of names of both
available manufacturers and products, provide one of the products listed, or an
unnamed product, that complies with requirements. Comply with requirements
in "Comparable Products" Article for consideration of an unnamed product.
2. Manufacturers:
a. Restricted List (Manufacturers): Where Specifications include paragraphs or
subparagraphs titled “Manufacturers” or that include the phrase “provide products
by one of the following”, and include a list of manufacturers' names, provide a
product by one of the manufacturers listed that complies with requirements.
Comparable products for Contractor's convenience will not be considered.
- Substitutions may be considered, unless otherwise indicated.
b. Non-restricted List (Available Manufacturers): Where Specifications include
paragraphs or subparagraphs titled “Available Manufacturers” or that include the
phrase “include, but are not limited to, the following”, and include a list of
available manufacturers, provide a product by one of the manufacturers listed, or
a product by an unnamed manufacturer, that complies with requirements. Comply
with requirements in "Comparable Products" Article for consideration of an
unnamed manufacturer's product.
3. Basis-of-Design Product: Where Specifications name a product, or refer to a product
indicated on Drawings, and include a list of manufacturers, provide the specified or
indicated product or a comparable product by one of the other named manufacturers.
Drawings and Specifications indicate sizes, profiles, dimensions, and other
characteristics that are based on the product named.
a. Restricted List (List of Manufacturers): Where Specifications include paragraphs
or subparagraphs titled “Basis-of-Design Product”, and include a list of other
manufacturers' names, provide the specified or indicated product or a comparable
product by one of the other named manufacturers that complies with
requirements.
- Comply with requirements in "Comparable Products" Article for
consideration of an unnamed product by one of the other named
manufacturers.
- Substitutions may be considered, unless otherwise indicated.
b. Non-restricted List (No List of Manufacturers): Where Specifications include
paragraphs or subparagraphs titled “Basis-of-Design Product”, and do not include
a list of other manufacturers’ names, provide the specified or indicated product or
a comparable product by another manufacturer that complies with requirements.
Comply with requirements in "Comparable Products" Article for consideration of
an unnamed manufacturer's product.
CORNELL UNIVERSITY SECTION 01 25 00
Ithaca, New York SUBSTITUTIONS AND PRODUCT OPTIONS
RPCC MAIL CENTER SUBSTITUTIONS AND PRODUCT OPTIONS 01 25 00-6
RENOVATION May 21, 2019
C. For products specified by naming one or more products or manufacturers and stating "or
equal", the Contractor shall submit a request as for substitutions, for any product or
manufacturer not specifically named. Such substitution shall have been listed on Bid Form as
required in Instructions to Bidders. If not so listed, no substitution will be allowed.
D. For products specified by naming only one product and manufacturer, no option and no
substitution will be considered unless listed on the Bid Form as provided in the Instructions
to Bidders. Base Bid must include the specified product or manufacturer. Substitutions will
be at the sole discretion of the Owner.
1.9 SUBSTITUTIONS
A. Substitutions for Cause: Submit requests for substitution immediately on discovery of need
for change, but not later than 21 days prior to time required for preparation and review of
related submittals.
B. Substitutions for Convenience: Submit requests for substitution within thirty (30) days of
contract award.
C. Submit a separate request for each substitution. Support each request with:
1. Completed "Request for Substitution" form in eBuilder. A request for substitution of a
product, material, or process for that specified in the Contract Documents must be
formally submitted as such accompanied by evidence that the proposed substitution ﴾1﴿
is equal in quality and serviceability to the specified item; ﴾2﴿ will not entail changes in
detail and construction of Other Work; ﴾3﴿ will be acceptable to the Architect and
Owner's Design Consultant's in achieving design and artistic intent; and ﴾4﴿ will not
result in a cost and/or schedule disadvantage.
2. Complete data substantiating compliance of the proposed substitution with
requirements stated in Contract Documents:
a. Product identification, including manufacturer's name and address.
b. Manufacturer's literature; identify:
- Product description.
- Reference standards.
- Performance and test data.
c. Samples, as applicable.
d. Name and address of similar projects on which product has been used, and the
date of each installation.
3. An itemized comparison of the proposed substitution with the product specified listing
any variations.
4. Data relating to any changes in the construction schedule.
CORNELL UNIVERSITY SECTION 01 25 00
Ithaca, New York SUBSTITUTIONS AND PRODUCT OPTIONS
RPCC MAIL CENTER SUBSTITUTIONS AND PRODUCT OPTIONS 01 25 00-7
RENOVATION May 21, 2019
5. The effect of the substitution on each separate contract of the Project.
6. List any changes required in other work or projects.
7. Designate any required license fees or royalties.
8. Designate availability of maintenance services, and source of replacement materials.
D. Substitutions shall not result in additions to the Contract Sum.
E. Substitutions will not be considered as having been accepted when:
1. They are indicated or implied on shop drawings or product data submittals without a
formal request from the Contractor.
2. They are requested by a subcontractor or supplier.
3. The acceptance will require substantial revision of Contract Documents.
F. Substitute products shall not be ordered or installed without written acceptance of the Owner.
G. The Owner and the Architect shall be the sole judges of the acceptability of a proposed
substitution.
1.10 COMPARABLE PRODUCTS
A. Conditions for Consideration: Contractor's request for approval of comparable product will
be considered when the following conditions are satisfied. If the following conditions are not
satisfied, Architect may reject or return requests without action, except to record
noncompliance with these requirements. Where products or manufacturers are specified by
name, submit the following, in addition to other required submittals, to obtain approval of an
unnamed product or manufacturer:
1. Evidence that the proposed product does not require revisions to the Contract
Documents that it is consistent with the Contract Documents and will produce the
indicated results, and that it is compatible with other portions of the Work.
2. Detailed comparison of significant qualities of proposed product with those named in
the Specifications. Significant qualities include attributes such as performance, weight,
size, durability, visual effect, sustainable design characteristics, warranties, and specific
features and requirements indicated. Indicate deviations, if any, from the product
specified.
3. Evidence that proposed product provides specified warranty.
4. List of similar installations for completed projects with project names and addresses
and names and addresses of architects and owners, if requested.
5. Samples, if requested.
CORNELL UNIVERSITY SECTION 01 25 00
Ithaca, New York SUBSTITUTIONS AND PRODUCT OPTIONS
RPCC MAIL CENTER SUBSTITUTIONS AND PRODUCT OPTIONS 01 25 00-8
RENOVATION May 21, 2019
1.11 CONTRACTOR'S REPRESENTATION
A. In making a formal request for a substitution the Contractor represents that:
1. By submitting Shop Drawings, Product Data, Samples and similar submittals, the
Contractor thereby represents that he has determined and verified all dimensions,
quantities, field dimensions, relations to existing work, coordination with work to be
installed later, coordination with information on previous Shop Drawings, Product
Data, or Samples and compliance with all the requirements of the Contract Documents.
The accuracy of all such information is the responsibility of the Contractor.
2. The Contractor has personally investigated the proposed product and has determined
that it is equal to or superior in all respects to that specified.
3. The Contractor will provide the same warranties or bonds for the substitution as for the
product specified.
4. The Contractor will coordinate the installation of an accepted substitution into the
Work, and will make such changes as may be required for the Work to be complete in
all respects.
5. The Contractor waives all claims for additional costs related to the substitution which
may subsequently become apparent.
1.12 ARCHITECT'S DUTIES
A. Review Contractor's requests for substitutions with reasonable promptness.
B. Transmit evaluations and recommendations to the Owner, so that the Owner can notify the
Contractor of the decision for acceptance or rejection of the request for substitution.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 25 00***
CORNELL UNIVERSITY SECTION 01 31 19
Ithaca, New York PROJECT MEETINGS
RPCC MAIL CENTER PROJECT MEETINGS 01 31 19-1
RENOVATION May 21, 2019
SECTION 01 31 19 PROJECT MEETINGS
1.0 GENERAL
1.1 DESCRIPTION
A. The Owner will schedule and administer pre-construction meeting, periodic progress
meetings, and specially called meetings throughout the progress of the work.
1. Prepare agenda for meetings.
2. Distribute written notice of each meeting four days in advance of meeting date.
3. Make physical arrangements for meetings.
4. Preside at meetings.
5. Record the minutes; include all significant proceedings and decisions.
6. Duplicate and distribute copies of minutes after each meeting.
a. To all participants in the meeting.
b. To all parties affected by decisions made at the meeting.
c. To the Architect.
B. Representatives of Contractor, subcontractors and suppliers attending the meetings shall be
qualified and authorized to act on behalf of the entity each represents.
1.2 PRE-CONSTRUCTION MEETING
A. Schedule at least fifteen (15) days after date of Notice to Proceed.
B. Location: A central site, convenient for all parties.
C. Attendance:
1. Owner's Representative(s)
2. Contractor(s)
3. Architect and its professional consultants
4. Major Subcontractors
5. Major suppliers
6. Safety Representatives for the Owner and Contractor
CORNELL UNIVERSITY SECTION 01 31 19
Ithaca, New York PROJECT MEETINGS
RPCC MAIL CENTER PROJECT MEETINGS 01 31 19-2
RENOVATION May 21, 2019
D. Minimum Agendum:
1. Distribution and discussion of:
a. List of major subcontractors and suppliers
b. Projected Construction Schedules
2. Critical work sequencing
a. Identification of major shut downs and approximate schedule
3. Major equipment deliveries and priorities
4. Project Coordination
a. Designation of responsible personnel
5. Procedures and processing of:
a. Field decisions
b. Proposal requests
c. Submittals
d. Change Orders
e. Applications for Payment
f. Requests for Information
g. Daily Reports
6. Adequacy of distribution of Contract Documents
7. Procedures for maintaining Record Documents
8. Use of premises:
a. Office, work and storage areas
b. Owner's requirements
c. Job site personnel conduct
d. Building access and security
9. Temporary facilities, controls and construction aids
10. Temporary utilities
CORNELL UNIVERSITY SECTION 01 31 19
Ithaca, New York PROJECT MEETINGS
RPCC MAIL CENTER PROJECT MEETINGS 01 31 19-3
RENOVATION May 21, 2019
11. Safety and first-aid procedures
a. Contractor’s Project Site Specific Plan
12. Security procedures
13. Housekeeping procedures
14. Affirmative Action Plan and Reporting requirements
1.3 PROGRESS MEETINGS
A. Schedule regular periodic meetings on the site, not less than once every two weeks
throughout the Construction period.
B. Attendance:
1. Architect
2. Architect's professional consultants when, in the opinion of the Owner, needed
3. General Contractor, including Site Superintendent
4. Owner's Representatives
5. Subcontractors as appropriate to the agenda
6. Suppliers as appropriate to the agenda
7. Safety Representative
C. Minimum Agenda:
1. Review, approval of minutes of previous meeting
2. Review percentage of work to be in place by next meeting by individual trades
3. Review of work progress since previous meeting
4. Field observations, problems, and conflicts
5. Problems which impede Construction Schedule
6. Review of off-site fabrication, delivery schedules
7. Corrective measures and procedures to regain projected schedule
8. Revisions to Construction Schedule
9. Planned progress and schedule, during succeeding work period
10. Coordination of schedules
11. Review submittal schedules; expedite as required
CORNELL UNIVERSITY SECTION 01 31 19
Ithaca, New York PROJECT MEETINGS
RPCC MAIL CENTER PROJECT MEETINGS 01 31 19-4
RENOVATION May 21, 2019
12. Maintenance of quality standards
13. Review status of all issued proposal requests and change orders
14. Review proposed changes for:
a. Effect on Construction Schedule and on completion date
b. Effect on other contracts of the Project
15. Other business
D. All decisions, instructions, and interpretations given by the Architect/Engineer or its
representative at these meetings shall be binding and conclusive on the Contractor.
1.4 PRE-INSTALLATION CONFERENCE(S)
A. The Contractor to hold pre-installation conferences where required by individual specification
sections or others at the discretion of the Owner. Minimum attendees would be Architect and/or
their specific sub-consultant, Owner, Contractor, Subcontractor, key Suppliers, testing &
inspection firm, Facilities Engineering subject matter expert, etc. Minimum agenda would
include review of key submittals, RFI’s, safety, logistics, material procurement, quality control,
etc. Contractor to assemble and distribute the Agenda minimum 48 hours prior to meeting as well
as distribute meeting minutes a minimum of seven (7) calendar days after the meeting.
B. Submit a list of pre-installation meetings with preliminary dates within fifteen (15) days of
issuance of the Notice to Proceed.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
****END OF SECTION 01 31 19***
CORNELL UNIVERSITY SECTION 01 31 50
Ithaca, New York ELECTRONIC PROJECT MANAGEMENT
RPCC MAIL CENTER ELECTRONIC PROJECT MANAGEMENT 01 31 50-1
RENOVATION (ePM) SYSTEM May 21, 2019
SECTION 01 31 50 ELECTRONIC PROJECT MANAGEMENT
1.0 GENERAL
1.1 SUMMARY
A. Owner Provided System: The Contractor will utilize the Owner’s electronic Project
Management (e-PM) system eBuilder on this project.
1. The Owner shall manage the day to day use of the Owner provided ePM system and
organize the training, support and maintenance of the ePM Website System for the
entire project team for the period of its use on the Project.
B. There are no fees to utilize this system.
1.2 RELATED SECTIONS
A. General Conditions Article 9 – Coordination and Cooperation.
B. Section 01 33 00 – Submittal Procedures
1.3 DEFINITIONS
A. ePM: defined as an internet-based information and project communication system that
allows the entire project team to collaborate in a centralized and secured repository. All
project-specific correspondence, workflow processes, and documentation will be stored
and routed within the ePM system.
1.4 PROCEDURES
A. Users will be provided a username and password. The Contractor shall log into the
e-PM system to enter the Project Documentation listed in section 2.0. All correspondence
should be communicated through the e-PM system.
B. Training
1. The Owner will hold training sessions to familiarize team members with the
system, and all Contractor staff are expected to attend one of these sessions or
otherwise receive proper training on the system’s use. All cost for personnel time
and travel to attend the training as needed shall be included in the Contractor’s
proposal
C. The Contractor shall provide on-site personnel with personal computer(s) and personal
computer equipment that will allow the Contractor’s personnel to access and use the ePM
Website System in a timely and efficient manner. At a minimum the Contractor is to
provide the following equipment and software:
1. Web Browser: with high-speed connection, up/down loading capability
CORNELL UNIVERSITY SECTION 01 31 50
Ithaca, New York ELECTRONIC PROJECT MANAGEMENT
RPCC MAIL CENTER ELECTRONIC PROJECT MANAGEMENT 01 31 50-2
RENOVATION (ePM) SYSTEM May 21, 2019
2. Color printer and plotter capable of full-size document production
3. Scanner: capable of scanning a high volume of project documents clearly and
quickly
4. Digital Camera: (1) single lens reflex (SLR) type camera
5. Portable Document Format (PDF) Reader/writer software
D. Contractor shall log on to the ePM Website System on a daily basis, and as necessary to
be kept fully appraised of the project developments, correspondence, assigned tasks and
other matters that occur on the site. These may include but are not limited to RFI’s,
action items, meeting minutes, discussion threads, schedule updates, submittals,
submittal log, punch list items, daily reports, site photos and/or videos and pre-
construction surveys.
1.5 PROCESS OVERVIEW
A. The Contractor is required to timely and accurately post, review, respond, and collaborate
with other team members using the following features and/or workflow processes within
the ePM system.
B. Project Team Directory – Contractor shall provide an updated directory of contact
information for all companies, subcontractors and project team members who are
engaged on this project.
C. Request for Information (RFI): All project RFI’s will be submitted using the ePM
Website System. The submission of a Request for Information (RFI) is the Contractor’s
exclusive means of requesting information from the Owner and/or Architect.
Attachments to RFI’s (which may include sketches, photographs, documentation, and
the like, will be uploaded to the ePM Website System and attached to the RFI
electronically.
D. Meeting Minutes: Contractor shall enter meeting agendas, records and minutes in the
system for all applicable meetings as designated by the Owner.
E. General Communications, memorandums and Letters (Project Correspondence): Shall
be created in or posted to the ePM Website System in PDF format electronically linked
to action items. These action items shall include names of party (ies) required to respond,
time frame within which action is to be taken and any solutions the Contractor
recommends.
F. Drawings and Specifications: The Contract Documents will be posted to the ePM
Website System as directed by the Owner. The Owner shall retain the right to assign
download rights to active CAD or model files. CAD or model files, in any format, posted
to the ePM Website System are for viewing and printing only and cannot be edited.
G. Submittals: All submittals shall be fully electronic. Reference Section 01 33 00.
H. Submittal Schedule and Log: Contractor shall post and/or update on a daily basis.
CORNELL UNIVERSITY SECTION 01 31 50
Ithaca, New York ELECTRONIC PROJECT MANAGEMENT
RPCC MAIL CENTER ELECTRONIC PROJECT MANAGEMENT 01 31 50-3
RENOVATION (ePM) SYSTEM May 21, 2019
I. Field Reporting: The Contractor shall post and/or update on a daily basis all reports
required by other specification sections. These reports include, but are not limited to,
daily construction reports, material location reports, unusual event reports, safety and
accident reports.
J. Project Photographs: Contractor shall upload project photographs to the ePM system,
field by date and type including but not limited to:
1. General Progress Photographs
2. RFI Issues
3. Non-Conforming Work
4. Special Events
5. As required by individual Specification Sections
K. Project Schedule: The contractor shall post, distribute, review, and/or respond to the
project schedule, monthly updates, and any other schedule submittals onto the ePM in
both native and PDF formats.
L. Permits & Approvals: Contractor shall upload and maintain current copies of all permits
and agency approvals that relate to the project.
M. Issue Tracking: Contractor to log and respond to issues that are related and affect other
stakeholders within the project team.
N. Quality Assurance: The Owner and/or Architect will issue reports on conforming items
in the ePM system. The Contractor is required to review and respond with corrective
actions in the system.
O. Change Management – Cost Events and Change Orders will be managed by the e-PM
system and the Contractor shall be responsible for reporting potential changes and
logging Requests for Change Orders in the system. The Contractor shall also upload and
manage all documentation supporting Requested Change Orders.
P. Pay Applications Requests (Invoices) – The Contractor shall create and submit invoices
for review by the Owner. Once the invoices are agreed to by the Owner then the invoices
should be submitted electronically per the instructions for the ePM system.
Q. Budget and Cost Management – Contractor to provide estimates and work breakdown
structure (WBS) to provide Owner with accurate budget/cost analysis.
CORNELL UNIVERSITY SECTION 01 31 50
Ithaca, New York ELECTRONIC PROJECT MANAGEMENT
RPCC MAIL CENTER ELECTRONIC PROJECT MANAGEMENT 01 31 50-4
RENOVATION (ePM) SYSTEM May 21, 2019
1.6 ADDITIONAL INFORMATION
A. The Owner may change the standards for distribution and process prescribed above as
required to suit the project.
B. The Owner shall retain ownership of all data entered into either system and shall
administrate and distribute all information contained therein.
C. The Contractor shall make certain that all subcontractors performing significant work on
the project shall actively participate in the e-PM system. Requirements for participation
in the e-PM system shall be made part of each bid document and final contract.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
****END OF SECTION 01 31 50***
CORNELL UNIVERSITY SECTION 01 32 16
Ithaca, New York CONSTRUCTION SCHEDULE
RPCC MAIL CENTER CONSTRUCTION SCHEDULE 01 32 16-1
RENOVATION May 21, 2019
SECTION 01 32 16 CONSTRUCTION SCHEDULE
1.0 GENERAL
1.1 SUMMARY
A. The Contractor shall, within fourteen (14) calendar days of Notice to Proceed, prepare
and submit to the Owner estimated construction progress schedules for the entire Work,
with sub-schedules of related activities which are essential to the progress of the Work.
B. Conferences will be held with the Architect, Owner and Contractor at the start of the
project to agree mutually on a progress schedule which must be diligently followed.
C. Submit revised progress schedules periodically and when requested to do so by Owner.
D. Submit to Owner and Architect a cash flow projection in accordance with Schedule of
Values.
E. Submit electronic versions of all schedules, including updates, as well as all back-up to
the submitted schedules.
1.2 FORM OF SCHEDULES
A. Prepare Network Analysis system, or prepare schedules in the form of a horizontal bar
chart.
1. Provide separate horizontal bar for each trade or operation.
2. Horizontal time scale: Identify the first work day of each week.
3. Scale and spacing: To allow space for notations and future revisions.
B. Format of listings: The chronological order of the start of each item of work.
C. Identification of listings: By specification section numbers.
1.3 CONTENT OF SCHEDULES
A. Construction Progress Schedule:
1. Show the complete sequence of construction by activity.
2. Show the dates for the beginning, and completion of, each major element of
construction. Specifically list:
a. Demolition
CORNELL UNIVERSITY SECTION 01 32 16
Ithaca, New York CONSTRUCTION SCHEDULE
RPCC MAIL CENTER CONSTRUCTION SCHEDULE 01 32 16-2
RENOVATION May 21, 2019
b. Interior framing
c. Mechanical / HVAC
d. Electrical
e. Equipment installations
f. Finishes
g. Pre-Installation meetings
3. Show projected percentages of completion for each item, as of the first day of
each month.
4. Show estimated dates for the beginning and completion of work which must be
completed by or coordinated with the Owner such as hazardous materials
abatement, moving, training and other such items as they are identified.
B. Submittals Schedule for Shop Drawings, Product Data and Samples: Confer with the
Architect and agree on all elements of the Submittals Schedule. The schedule will be
based on the understanding that minimum turn-around time in the Architect's office is
ten (10) working days. Some submittals or groups of submittals may take longer to
review. Submittals which do not conform to the agreed schedule may be subject to delays
in processing. Show:
1. The dates for Contractor's submittals.
2. The dates reviewed submittals will be required from the Architect.
3. Confirmed lead time for manufacturing, production, fabrication and shipment to
the project site of all materials which have an impact on the critical path of the
Project's construction schedule.
1.4 PROGRESS REVISIONS
A. Indicate progress of each activity to date of submission.
B. Show changes occurring since previous submission of schedule:
1. Major changes in scope
2. Activities modified since previous submission
3. Revised projections of progress and completion
4. Other identifiable changes
CORNELL UNIVERSITY SECTION 01 32 16
Ithaca, New York CONSTRUCTION SCHEDULE
RPCC MAIL CENTER CONSTRUCTION SCHEDULE 01 32 16-3
RENOVATION May 21, 2019
C. Provide a narrative report as needed to define:
1. Problem areas, anticipated delays, and the impact on the schedule.
2. Corrective action recommended, and its effect.
3. The effect of changes on schedules of other prime contractors.
1.5 SUBMISSIONS
A. Submit initial Construction Progress Schedules within fifteen (15) calendar days after
award of Contract.
1. Owner will review schedules and return review copy within ten (10) days after
receipt.
2. If required, resubmit within seven (7) days after return of review copy.
B. Submit progress revision schedules to accompany each application for payment.
C. Submit Submittals Schedule within thirty (30) calendar days after date of commencement
of work.
D. Submit one reproducible transparency and one opaque reproduction.
2.0 PRODUCTS - NOT USED
3.0 EXECUTION
3.1 DISTRIBUTION
A. Distribute copies of the reviewed schedules to:
1. Owner Job Site personnel
2. Subcontractors
3. Other concerned parties
B. Instruct recipients to report to the Contractor, in writing, any problems anticipated by the
projections of the schedule.
***END OF SECTION 01 32 16***
CORNELL UNIVERSITY SECTION 01 32 33
Ithaca, New York PHOTOGRAPHIC DOCUMENTATION
RPCC MAIL CENTER PHOTOGRAPHIC DOCUMENTATION 01 32 33-1
RENOVATION May 21, 2019
SECTION 01 32 33 PHOTOGRAPHIC DOCUMENTATION
1.0 GENERAL
1.1 DESCRIPTION
A. The Contractor shall provide existing condition photographs taken before commencement of
Work, progress photographs taken periodically during progress of the Work, and final
photographs upon completion and full occupancy of the building.
1.2 SUBMITTALS
A. Progress Submittals
1. Key Plan: Submit key plan of Project area and building with notation of vantage points
marked for location and direction of each photograph.
2. Submit digital photograph electronic files, organizationally filed by week, to E-Builder
within five (5) days of taking photographs.
3. Each photograph shall be identified with project title, date, and a description of the
view.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION
3.1 EXISTING CONDITION PHOTOGRAPHS
A. Before commencement of selective demolition, take photographs of Project area and
surrounding areas, including existing items to remain during construction.
3.2 PROGRESS PHOTOGRAPHS
A. Photographs shall be taken weekly in a manner which completely documents the work.
B. The photographs shall be submitted to the Owner at the end of the first week for review.
C. Provide photographs of any wall, ceiling or floor assembly containing MEP, A/V or any
infrastructure that will thereafter become concealed-prior to closure. Note location on Key
Plan.
3.3 FINAL COMPLETION PHOTOGRAPHS
A. Photographs shall be taken in a manner which completely documents the completed work,
for submission as project record documents.
***END OF SECTION 01 32 33***
CORNELL UNIVERSITY SECTION 01 33 00
Ithaca, New York SUBMITTAL PROCEDURES
RPCC MAIL CENTER SUBMITTAL PROCEDURES 01 33 00-1
RENOVATION May 21, 2019
SECTION 01 33 00 SUBMITTAL PROCEDURES
1.0 GENERAL
1.1 DESCRIPTION
A. Section includes administrative and procedural requirements for submittals, including the
following:
1. Shop Drawings
2. Product Data
3. Samples
4. Quality Assurance and Quality Control Submittals
5. Certification of Asbestos free products
6. Owner furnishings and fixed equipment
B. Designate in the construction schedule, and/or in a separate Submittals Schedule, the dates
for submission and the dates reviewed Shop Drawings, Product Data and Samples will be
needed.
C. With the exception of physical samples and color charts, or as otherwise approved by the
Owner, all submittals shall be electronic images in PDF format created electronically (saved
with commenting allowed) which shall be submitted for review and approval via the
electronic project management web site. PDFs shall be created directly from the native file
format electronically. Scanning of paper to PDF shall be used minimally. Any non-
electronic submittals shall be approved on a case by case basis and logged into the electronic
management system as directed by a Cornell representative.
1.2 SUBMITTAL REGISTRY AND SCHEDULE
A. The Architect shall provide a draft submittal registry in the template needed for eBuilder
importation. It will be part of the contract documents and turned over to the Contractor in
native format for their use. The Contractor shall be responsible for review and completion of
the registry including addition of dates identified below and other information as deemed
necessary by the Owner.
B. The submittal registry and schedule shall list all submittals required by the specifications,
listed in order by the specification section in which they are required. Coordinate the
Submittal Schedule with the Contractor's Critical Path Method Construction Schedule and
other related documents.
CORNELL UNIVERSITY SECTION 01 33 00
Ithaca, New York SUBMITTAL PROCEDURES
RPCC MAIL CENTER SUBMITTAL PROCEDURES 01 33 00-2
RENOVATION May 21, 2019
C. The Submittal Registry shall include the following information:
1. Title (by Architect for Contractor review)
2. Related specification section and paragraph numbers (by Architect for Contractor
review)
3. Subsection (by Architect for Contractor review)
4. Category of Submittal (Certification, Mock-Up, Operations/Maintenance Manual,
Product Data, Sample, Shop Drawing, Test Report, As Built, etc.) (by Architect for
Contractor review)
5. Submittal Description including description of the part of the Work covered by the
submittal (by Architect for Contractor review)
6. Name of Subcontractor, if applicable (Contractor provided, optional)
7. Date due from Subcontractor (Contractor provided, optional)
8. Date due to be submitted for review (Contractor provided, required)
9. Date due for submittal review to be completed (Contractor provided, required)
10. Date for transmittal to Subcontractor (Contractor provided, optional)
11. Date for material or product delivery to project (Contractor provided, required)
12. Priority. Low, normal or high (Contractor provided, required)
D. Schedule a resubmittal for each major submittal. Except where specified otherwise in the
contract documents, provide review times for submittals in accordance with Submittal
Procedures and Architect’s Duties below.
E. Distribution: Initially submit the Submittal Schedule to the Owner for review via the
electronic Project Management system. A submittal schedule compliant with the
requirements of this section showing all submittals for the preliminary schedule submission
duration shall be submitted with the Contractor’s preliminary schedule submittal described
in Section 01 32 16. The schedule shall also enumerate all submittals to be processed after
the initial preliminary schedule submission duration period, although the date for these
submittals does not have to be indicated. A final baseline submittal schedule showing all
submittals for the entire project shall be included in the baseline schedule submittal described
in section 01 32 16.
F. Updating: The Submittal Schedule shall be kept up-to-date by the Contractor until all
submittals are approved. Failure to provide the requested information, or delay in submitting
required submittals may result in the payment request being returned to the Contractor until
the required schedule or submittals are received.
CORNELL UNIVERSITY SECTION 01 33 00
Ithaca, New York SUBMITTAL PROCEDURES
RPCC MAIL CENTER SUBMITTAL PROCEDURES 01 33 00-3
RENOVATION May 21, 2019
1.3 SHOP DRAWINGS
A. Drawings shall be newly prepared information drawn accurately to scale by skilled
draftsperson and presented in a clear and thorough manner.
1. Highlight, encircle, or otherwise indicate deviations from Contract Documents.
2. Do not reproduce Contract Documents or copy standard information as basis of Shop
Drawings.
3. Standard information prepared without specific reference to Project is not Shop
Drawing.
B. Shop Drawings include fabrication and installation Drawings, setting diagrams, schedules,
patterns, templates and similar Drawings. Include the following information:
1. Dimensions.
2. Identification of products and materials included by sheet and detail number.
3. Compliance with specified standards.
4. Notation of coordination requirements.
5. Notation of dimensions established by field measurements.
6. Submittal:
a. For electronic transmittal, submittals shall be distributed electronically via the
electronic project management system and will be reviewed and returned
electronically marked with action taken.
b. Maintain returned document as a “Record Document”.
1.4 PRODUCT DATA
A. Product Data includes brochures, diagrams, standard schedules, performance charts, and
instructions that illustrate physical size, appearance and other characteristics of materials and
equipment. All submittals shall identify all products as being asbestos free, see
Section 01 35 29.
B. Collect Product Data into a single submittal for each element of construction or system.
1. Clearly mark each copy to show applicable choices and options. Failure to do so will
result in rejection of the submission.
2. Show performance characteristics and capacities.
3. Show dimensions and clearances required.
4. Show wiring or piping diagrams and controls.
CORNELL UNIVERSITY SECTION 01 33 00
Ithaca, New York SUBMITTAL PROCEDURES
RPCC MAIL CENTER SUBMITTAL PROCEDURES 01 33 00-4
RENOVATION May 21, 2019
5. Where Product Data includes information on products that are not required, eliminate
or mark through information that does not apply.
6. Supplement standard information to provide information specifically applicable to the
Work.
7. Preliminary Submittal: Submit single copy of Product Data where selection of options
by Architect is required.
8. Submittals:
a. For electronic transmittal, submittals shall be distributed electronically via the
electronic project management system and will be reviewed and returned
electronically marked with action taken.
b. Maintain one (1) copy as a “Record Document”.
1.5 SAMPLES
A. Samples include partial sections of manufactured or fabricated components, cuts or containers
of materials, color range sets, and swatches showing color, texture, and pattern.
B. Office samples shall be of sufficient size and quantity to clearly illustrate:
1. Functional characteristics of the product, with integrally related parts and attachment
devices.
2. Full range of color, texture and pattern.
C. Field samples and mock-ups:
1. Contractor shall erect, at the Project site, at a location acceptable to the Architect.
2. Size or area: that specified in the respective specification section.
3. Fabricate each sample and mock-up complete and finished.
4. Remove mock-ups when directed by the Architect.
5. Perform necessary work to bring any area disturbed by mock-ups to the areas original
condition.
D. Submit fully fabricated Samples cured and finished as specified and physically identical with
material or product proposed.
1. Mount or display Samples in manner to facilitate review of qualities indicated.
2. Identify Samples with generic description, product name, and name of manufacturer.
3. Submit Samples for review and verification of size, kind, color, pattern, and texture.
CORNELL UNIVERSITY SECTION 01 33 00
Ithaca, New York SUBMITTAL PROCEDURES
RPCC MAIL CENTER SUBMITTAL PROCEDURES 01 33 00-5
RENOVATION May 21, 2019
4. Where variation in color, pattern, texture, or similar characteristics is inherent in
material or product represented, submit at least three (3) multiple units that show
approximate limits of variations.
5. Preliminary Submittals: Submit one (1) full set of choices where Samples are submitted
for Architect’s selection of color, pattern, texture, or similar characteristics from a range
of standard choices.
6. Submittals:
a. Submit four (4) sets for Architect’s review. Architect will return at least one (1)
set marked with action taken. Maintain sets of Samples, as returned, at Project
Site, for quality comparisons throughout course of construction. Additionally, for
electronic transmittal, photograph sample and its label and attached to the
submittal item electronically via the electronic project management.
1.6 QUALITY ASSURANCE AND QUALITY CONTROL SUBMITTALS
A. Quality assurance and quality control submittals include design data, test reports,
certifications, manufacturer’s instructions, and manufacturer’s field reports.
B. Professional design services or certifications: Where Contract Documents require
professional design services or certifications by a design professional, Contractor shall cause
such services or certifications to be provided by a qualified design professional, whose
registration seal shall appear on drawings, calculations, specifications, certifications, Shop
Drawings, and other submittals prepared by such professional. Architect shall be entitled to
rely upon adequacy, accuracy, and completeness of services, certifications, or approvals
performed by such design professionals.
C. Inspection and Test Reports: Requirements for submittal of inspection and test reports from
independent testing agencies as specified in the Contract Documents.
D. Manufacturer’s instruction: Preprinted instructions concerning proper application or
installation of system or product.
E. Manufacturer’s field reports: Reports documenting testing and verification by
manufacturer’s field representative to verify compliance with manufacturer’s standards or
instructions.
F. Submittals:
1. For electronic transmittal, submittals shall be distributed electronically via the
electronic project management system and will be reviewed and returned electronically
marked with action taken.
2. Maintain one (1) additional copy as “Record Document”.
1.7 CONTRACTOR RESPONSIBILITIES
A. Review submittals for compliance with Contract Documents and approve submittals prior to
transmitting to the Architect.
CORNELL UNIVERSITY SECTION 01 33 00
Ithaca, New York SUBMITTAL PROCEDURES
RPCC MAIL CENTER SUBMITTAL PROCEDURES 01 33 00-6
RENOVATION May 21, 2019
B. Specifically record deviations from Contract Document requirements, including minor
variations and limitation. Comply with requirements of Section 01 25 00 Substitutions and
Product Options.
C. Contractor’s approval of submittals shall indicate that the Contractor has determined and
verified materials, field measurements and field construction criteria, and has checked and
coordinated information within each submittal with requirement of the Work and Contact
Documents. Field conflicts which arise from the contractor’s failure to fully review and
approve submittals before ordering equipment, will result in the contractor being burdened
with all costs to remediate the situation.
D. Contractor shall be responsible for:
1. Compliance with the Contract Documents
2. Confirming and correlating quantities and dimensions
3. Selecting fabrication processes and techniques of construction.
4. Coordination of the work represented by each submittal with other trades.
5. Performing the work in a safe and satisfactory manner.
6. Compliance with the approved Construction Schedule.
7. All other provisions of the agreements.
E. It is understood that the Architect's notation on the submittals is not to be construed as an
authorization for additional work or additional cost.
F. If any notations represent a change to the Contract Sum, submit a cost proposal for the change
in accordance with procedures specified before proceeding with the work.
G. It is understood that the Architect's notation on the submittal is not to be construed as approval
of colors. Make all color-related submittals at one time.
H. Notify the Architect by letter of any notations made by the Architect which the Contractor
finds unacceptable. Resolve such issues prior to proceeding with the Work.
I. Begin no fabrication of work until all specified submittal procedures have been fulfilled.
J. Do not submit shop drawings, product data or samples representing work for which such
submittals are not specified. The Architect shall not be responsible for consequences of
inadvertent review of unspecified submittals.
K. The review of shop drawings shall not relieve the Contractor of the responsibility for proper
construction and the furnishing of materials and labor required even though the same may not
be indicated on the review shop drawings.
L. Certify that only asbestos free material is used in the execution of all work. Reference Section
01 35 39
CORNELL UNIVERSITY SECTION 01 33 00
Ithaca, New York SUBMITTAL PROCEDURES
RPCC MAIL CENTER SUBMITTAL PROCEDURES 01 33 00-7
RENOVATION May 21, 2019
1.8 SUBMITTAL PROCEDURES
A. Coordination
1. Coordinate submittals with performance of construction activities in accordance with
the Submittal Schedule approved by the Architect and Owner.
2. Coordinate each submittal with fabrication, purchasing, testing, delivery, other
submittals and related activities that require sequential activity.
3. Prepare and transmit each submittal in accordance with the Submittals Schedule, agreed
to by all entities involved.
4. Prepare, review, approve and transmit each submittal sufficiently in advance of
performance of related construction activities to avoid delay.
5. Architect's Review: Allow ten (10) working days for Architect's initial processing of
each submittal requiring the Architect’s review and response, except for longer periods
required as noted below, and where processing must be delayed for coordination with
subsequent submittals. The Architect will advise the Contractor promptly when it is
determined that a submittal being processed must be delayed for coordination. Allow
ten (10) working days for Architect's reprocessing of each submittal. Notify the
Architect when processing time for a submittal is critical to the progress of the work,
and the work would be expedited if its processing time could be shortened.
An additional five (5) working days will be required for items specified in Divisions 2,
3, 5, 23 and 26, and for Architectural Woodwork, Hollow Metal Work and Hardware
Schedules.
6. Allow time for delivery in addition to review.
7. Allow time for reprocessing each submittal.
8. No extension of Contract Time will be authorized because of failure to prepare
submittals sufficiently in advance of Work to permit processing.
9. Submittals made which do not conform to the schedule are subject to delays in
processing by the Architect.
10. Refer to Section 01 32 16 Construction Schedules for requirements of the Submittals
Schedule.
11. Failure of the Contractor to obtain approval of Shop Drawings shall render all work
thereafter performed to be at Contractor’s sole risk, cost and expense.
B. Submittal Preparation
1. Place permanent label or title block on each submittal for identification.
2. Indicate name of entity that prepared each submittal on label or title block.
CORNELL UNIVERSITY SECTION 01 33 00
Ithaca, New York SUBMITTAL PROCEDURES
RPCC MAIL CENTER SUBMITTAL PROCEDURES 01 33 00-8
RENOVATION May 21, 2019
3. Provide space on label or beside title block on Shop Drawings to record Contractor's
stamp, initialed or signed, certifying to review of submittal, action taken, verification
of products, field measurements and field construction criteria, and coordination of the
information within the submittal with requirements of the Work and of Contract
Documents.
4. Complete all fields on submittal item details in ePM system including meaningful
description.
5. Include the following information on submittal documentation:
a. Drawing, detail or specification references, including section number, as
appropriate to clearly identify intended use of product.
b. Field dimensions, clearly identified as such.
c. Relation to adjacent or critical features of the work or materials.
d. Applicable standards, such as ASTM or Federal Specification numbers.
e. Provide a blank space for the Architect’s stamps
f. On transmittal, record relevant information including deviations from Contract
Document requirements, including minor variations and limitations.
6. Identification of revisions on re-submittals, other than those noted by the Architect on
previous submittals.
7. Shop drawings with the comment "by others" are not acceptable. All such work must
specifically identify the related responsible subcontractor.
C. Submittal Transmittal:
1. Transmit submittals via the electronic project management system to Architect unless
otherwise noted or directed.
2. Prepare and generate transmittal in ePM system for submission of samples. Package
sample and other each submittal appropriately for transmittal and handling.
1.9 RECORD SUBMITTALS
A. Provide a record copy of the submittal to the Commissioning Agent in electronic format.
Record copy shall be a clean copy (free of notes from the design professional) which has been
updated to reflect the “as-installed” system. Provide document in PDF format.
B. Record copy of the submittal must be forwarded to the Commissioning Agent within fourteen
(14) calendar days of the final approved submittal.
C. Provide a record copy of the submittal (electronic format) for the O&M Manual.
CORNELL UNIVERSITY SECTION 01 33 00
Ithaca, New York SUBMITTAL PROCEDURES
RPCC MAIL CENTER SUBMITTAL PROCEDURES 01 33 00-9
RENOVATION May 21, 2019
1.10 RESUBMISSION REQUIREMENTS
A. Make any corrections or changes noted on previous submittals.
B. Shop Drawings and Product Data:
1. Revise initial drawings or data, and resubmit as specified for the initial submittal.
2. Indicate any changes which have been made other than those noted by the Architect.
C. Samples: Submit new samples as required for initial submittal.
1.11 ARCHITECT'S DUTIES
A. Review submittals with reasonable promptness as identified in 1.8, paragraph 5 of this
Section.
B. Notations on the Submittal Review Stamp or eBuilder file mean the following:
1. "Approved (APP)" indicates that no deviations from the design concept have been
found and Work may proceed.
2. "Approved as Noted (AAN)" indicates that deviations from the design concept which
have been found are noted, and the Contractor may proceed accordingly.
3. "Revise and Resubmit (RAR)" indicates that Work covered by submittal, including
purchasing, fabrication, delivery, or other activity may not proceed. Revise or prepare
new submittal according to Architect’s notations; resubmit without delay. Repeat if
necessary to obtain different action mark.
4. “Rejected (REJ)” indicates that Work covered by submittal, including purchasing,
fabrication, delivery, or other activity may not proceed. Revise or prepare new
submittal according to Architect’s notations; resubmit without delay. Repeat if
necessary to obtain different action mark.
5. “On Hold (ONH)” is used in a very limited capacity and means that the Contractor
should not take action until the reason for hold has been cleared and may be required to
revise and resubmit.
6. “Not Reviewed (NRV)” is used for submittals that were submitted in error,
duplicate, or other reason that does not require review by the Architect but need
to be closed by the Contractor upon return to them
7. “For Record Only (FRO)”: Submittals for information or record purposes, including
Quality Assurance and Quality Control Submittals, and Material Safety Data Sheets
(MSDS), will not require responsive action by the Architect.
a. Architect will forward informational submittals without action.
b. Architect will reject and return informational submittals not in compliance with
Contract Documents.
CORNELL UNIVERSITY SECTION 01 33 00
Ithaca, New York SUBMITTAL PROCEDURES
RPCC MAIL CENTER SUBMITTAL PROCEDURES 01 33 00-10
RENOVATION May 21, 2019
C. Incomplete Submittals: Architect will return incomplete submittals without action.
D. Unsolicited Submittals: Architect will return unsolicited submittals to sender without action.
E. Return submittals to Contractor for distribution, or for resubmission.
1.12 DISTRIBUTION
A. Distribute reviewed Shop Drawings and copies of Product Data when possible via the
electronic project management system to:
1. Job site file
2. Record Documents file
3. Subcontractors
4. Installers
5. Suppliers
6. Manufacturers
7. Fabricators
8. Architect
9. Owner
B. Do not permit use of unmarked copies or rejected copies of submittals in connection with
construction at Project Site or elsewhere where Work is in progress.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 33 00***
CORNELL UNIVERSITY SECTION 01 35 29
Ithaca, New York GENERAL HEALTH & SAFETY
RPCC MAIL CENTER GENERAL HEALTH & SAFETY 01 35 29-1
RENOVATION May 21, 2019
SECTION 01 35 29 GENERAL HEALTH & SAFETY
1.0 GENERAL
1.1 DESCRIPTION
A. This Section provides requirements for general health and safety during the project. The
requirements of this Section shall apply to both Contractor and all tiers of sub-contractors
involved in the project.
B. In addition to the requirements of this Section, all laws and regulations by applicable local,
state, and federal agencies shall apply to the work of this contract. In some cases the
requirements of these Specifications may by intention exceed such legal requirements, but in
no case shall this Specification be interpreted or understood to reduce or eliminate such
requirements.
1.2 CONTRACTOR’S PROJECT SITE SPECIFIC PLAN
A. Contractors are required to submit a Project Site Specific Plan (PSSP) for review by Cornell
University representatives before commencement of work on the site. The PSSP should
address site specific information, controls and or requirements as it relates to the entire scope
of work for the project. All contractors shall use the Project Site Specific Plan Template
below to develop their Project’s PSSP. The template may be downloaded at:
https://sp.ehs.cornell.edu/osh/occupational-safety/contractor-safety/Pages/default.aspx
1. Within the PSSP Template are example(s) to use as reference. The provided examples
demonstrate Cornell University’s expectations for providing detailed site specific
information, controls and requirements.
2. Project Site Specific Plan’s that inadequately address site specific operations will be
returned with comments for resubmission. Failure to submit a PSSP may result in delay
of project and/or denial of the payment.
3. All projects must have the PSSP submitted via e-Builder for review and comment.
B. PSSP submittal should be submitted a minimum of ten (10) days prior to the commencement
of work on site. The Contractor may opt to submit their PSSP in phases. The Contractor must
submit a phase submission plan using the PSSP Submission table included in the PSSP
template for approval by Owner’s Representative with initial submission. Submit remaining
phases no later than ten (10) days prior to the start of a new, predetermined project phase or
milestone.
1. Projects having less than a ten (10) day turn-around shall coordinate their submittal with
the Owner’s Representative, who should coordinate with Occupational Health, Safety
and Injury Prevention (OHSIP), the University Fire Marshall’s Office and Contract
College’s Codes Enforcement Official, if applicable.
CORNELL UNIVERSITY SECTION 01 35 29
Ithaca, New York GENERAL HEALTH & SAFETY
RPCC MAIL CENTER GENERAL HEALTH & SAFETY 01 35 29-2
RENOVATION May 21, 2019
C. The Contractor is responsible for its employees and its subcontractors. Subcontractors are
required to submit their PSSP to the General Contractor. The General Contractor is
responsible to ensure all subcontractor(s) PSSP’s are adequate per their scope of work.
D. The General Contractor is required to ensure their project’s PSSP is accurately maintained
throughout the duration of the contract. Resubmission is required for any new scope elements
not previously addressed by the Contractor’s original PSSP.
E. Definitions:
1. Project Site Specific Plan (PSSP): A structured document that details the scope of the
contract work and related site specific controls, requirements and information for
University and Contractor personnel. This document is not intended to be all inclusive
of all applicable local, state and federal laws and regulations for which the General
Contractor and its Subcontractor(s) are expected to comply.
2. Authority Having Jurisdiction (AHJ):
• The organization, office or individual responsible for approving equipment, an
installation or a procedure (NYS Fire Code).
• The local government, county government or state agency responsible for the
administration and enforcement of an applicable regulation or law (NYS Building
Code-§202.2).
3. Occupational Health, Safety and Injury Prevention (OHSIP): A division of Cornell
University’s Environmental Safety and Health Department. The OHSIP division can be
contacted at (607)-255-8200 or by email at askEHS@cornell.edu
4. SME: The University’s subject matter expert.
1.3 ASBESTOS
A. All products provided for use in construction at Cornell University are to be free of asbestos.
At Substantial Completion, prior to beneficial service, the Contractor shall provide a signed
certification form “Exhibit AC” stating that all Contractor supplied & installed products are
100% asbestos free. The Contractor has to attach applicable Safety Data Sheets/ Material
Safety Data Sheets for each product documenting a 100% asbestos free status. The University
may provide random testing of products for asbestos content. Any Contractor installed
product found to contain asbestos shall be classified as defective work. Defective work shall
be corrected by the Contractor as specified in the General Conditions.
B. Attached for the Contractor’s information are asbestos reports which represent samples taken
within the building.
C. If required, removal and disposal of asbestos containing material shall be performed by the
Owner under separate contract. Based on the attached report, all tested materials are reported
as no asbestos detected. Adhesive behind the reception counter could not be tested without
material removal, and will be tested at the time the mail room is out of service, prior to the
start of construction. Results will be reported to the Contractor. Contractor shall not begin
removal of non-tested materials until results are available.
CORNELL UNIVERSITY SECTION 01 35 29
Ithaca, New York GENERAL HEALTH & SAFETY
RPCC MAIL CENTER GENERAL HEALTH & SAFETY 01 35 29-3
RENOVATION May 21, 2019
1.4 LEAD
A. Building may contain lead based paint. The Contractor shall protect workers in accordance
with OSHA regulations. The Contractor selects the means and/or methods to address the
presence of lead based paint, and must concurrently protect its workers based on the
Contractor’s means and/or methods. The Contractor is required to submit a lead plan that is
site specific, indicating that the protective measures the Contractor proposes meet the OSHA
standard 1926.62 “Lead in Construction Standards”. This site specific plan should address
the particular methods the Contractor intends to protect its workers, the building occupants
and the building structure based on its selection of addressing the presence of lead based
paint.
1.5 SITE VISITS
A. The undertaking of periodic Site Visits by Architects, Engineers or the Owner shall not be
construed as supervision of actual construction, or make them responsible for the safety of
any persons; or make them responsible for means, methods, techniques, sequences or
procedures of construction selected by the Contractor or its Subcontractors; or make them
responsible for safety programs and precautions incident to the Work, or for the safe access,
visit, use, Work, travel or occupancy of any person.
1.6 CONFINED SPACE
A. The Contractor shall be responsible for the identification of confined space in accordance
with OSHA requirements.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 35 29***
CORNELL UNIVERSITY SECTION 01 35 29
Ithaca, New York GENERAL HEALTH & SAFETY
DIRECTED ASBESTOS BULK SAMPLING REPORT
May 28, 2019
SITE ADDRESS 217 Jessup Road
Ithaca, New York 14850
LOCATION Robert Purcell Community Center (3212)
TA 68
WORK ORDER 11755836
PROJECT 1900.018.061
Prepared for: Prepared by:
Cornell University Arctic Enterprises, Inc.
Mr. Dale Houseknecht 222 Teall Avenue, Suite 100A
116 Humphreys Service Building Syracuse, New York 13210
Ithaca, New York 14850 Tel: (315) 476‐1757
Fax: (315) 476‐1764
1900.018.061 – Robert Purcell Community Center – Rms. 102, 107(A‐G) – Directed Asbestos Sampling Report
Arctic Enterprises, Inc. May 28, 2019
TABLE OF CONTENTS
Page
1.0 INTRODUCTION ................................................................................................................. 1
2.0 PREVIOUS REPORTS/RECORDS REVIEW ............................................................................ 1
3.0 ASBESTOS BULK SAMPLING .............................................................................................. 1
4.0 OSHA AND NEW YORK STATE COMPLIANCE .................................................................... 2
5.0 PHOTOS ............................................................................................................................. 3
6.0 SUMMARY ......................................................................................................................... 4
7.0 CERTIFICATION .................................................................................................................. 4
ATTACHMENTS
Attachment A: Arctic’s Company License and Personnel Certifications
Attachment B: Asbestos Bulk Sample Laboratory Report
Attachment C: Sample Location Drawing
1900.018.061 – Robert Purcell Community Center – Rms. 102, 107(A‐G) – Directed Asbestos Sampling Report
Arctic Enterprises, Inc. Page 1 May 28, 2019
1.0 INTRODUCTION
In accordance with your request, Arctic Enterprises, Inc. (Arctic) was retained by Cornell
University to collect samples of any suspect asbestos‐containing materials (ACM) that may be
impacted during the upcoming room reconfigurations in spaces 102 and 107(A‐G), scheduled to
be conducted in the Robert Purcell Community Center, in Ithaca, New York.
2.0 PREVIOUS REPORTS/RECORDS REVIEW
Cornell provided Arctic with zero (0) previous survey reports prior to the sampling event.
3.0 ASBESTOS BULK SAMPLING
The asbestos samples were collected by Mr. Bruce Osterman and Mr. Conor Osterman, both
New York State Department of Labor (NYSDOL) certified Asbestos Building Inspectors. A total of
twelve (12) asbestos samples were collected. Post collection, the samples were labeled and
sent to AmeriSci New York, an approved environmental laboratory for analysis.
By regulatory definition, any building material containing greater than one percent (1%)
asbestos must be considered an asbestos‐containing material. None of the materials sampled
were found to be asbestos‐containing. The laboratory report has been included in Attachment
B. The table below (Table 3.1) summarizes the sampling results:
Table 3.1 – ASBESTOS BULK SAMPLE LABORATORY RESULTS
SAMPLE
NUMBER SAMPLE LOCATION MATERIAL
DESCRIPTION
ASBESTOS
CONTENT
SR‐001A Room 107 – Center Sheetrock NAD
SR‐001B Room 107 – North Sheetrock NAD
JC‐002A Room 107 – Center Joint Compound NAD
JC‐002B Room 107 – North Joint Compound NAD
CB‐003A Room 107 – Center 4” Gray Cove Base NAD
CB‐003B Room 107 – North 4” Gray Cove Base NAD
CBM‐004A Room 107 – Center Yellow/White Cove Base Mastic NAD
CBM‐004B Room 107 – North Yellow/White Cove Base Mastic NAD
CT‐005A Room 107 – Center 2’ x 2’ Lightly Textured Ceiling Tile NAD
CT‐005B Room 107 – North 2’ x 2’ Lightly Textured Ceiling Tile NAD
CPMAS‐006A Room 107 – Directly
Outside of Office 102 Black/Green Carpet Mastic NAD
1900.018.061 – Robert Purcell Community Center – Rms. 102, 107(A‐G) – Directed Asbestos Sampling Report
Arctic Enterprises, Inc. Page 2 May 28, 2019
Table 3.1 – ASBESTOS BULK SAMPLE LABORATORY RESULTS
SAMPLE
NUMBER SAMPLE LOCATION MATERIAL
DESCRIPTION
ASBESTOS
CONTENT
CPMAS‐006B Room 107 – North Black/Green Carpet Mastic NAD
Table Notes:
NAD = No Asbestos Detected
The following asbestos‐containing materials (ACMs) and presumed asbestos‐containing
materials (PACMs) were identified during this sampling event:
Table 3.2 – Approximate Quantity of ACMs & PACMs
BUILDING
MATERIAL
MATERIAL
LOCATION
ESTIMATED
QUANTITY
MATERIAL
CONDITION
Wood Panel Mastic
(PRESUMED UNTIL DESTRUCTIVE
SAMPLING CAN BE CONDUCTED)
Room 107 – Behind
Receptionist Desk 135 SF NF, Intact
Table Notes:
SF = Square Feet, NF = Non‐Friable, = Asbestos‐Containing Materials
4.0 OSHA AND NEW YORK STATE COMPLIANCE
Please note that the Occupational Safety & Health Administration (OSHA) still regulates
materials with any amount of asbestos present, even those with less than one percent
asbestos. Although work operations conducted in areas where a material contains less than or
equal to one percent asbestos is an "unclassified" operation, the employer still must follow the
requirements of 29 CFR 1926.1101(g) (1) [except (g) (1) (i)], (g) (2) and (g) (3) that describe
engineering and work practice controls operations to prevent unnecessary asbestos exposures
to their employees (worker protection regulations).
Transmittal of Building/Structure Asbestos Survey Information – As required by New York State
Industrial Code Rule 56, copies of the building/structure asbestos survey shall be immediately
transmitted by the building/structure owner, as follows:
(1) One (1) copy of the completed asbestos survey shall be sent by the owner or their agent
to the local entity charged with issuing a permit for such demolition, renovation,
remodeling or repair work under State or local laws.
(2) One (1) copy of the completed asbestos survey for controlled demolition (as per Subpart
56‐11.5) or pre‐demolition asbestos projects shall also be submitted to the appropriate
Asbestos Control Bureau district office.
(3) One (1) copy of the completed asbestos survey shall be kept on the construction site
with the asbestos notification and variance, if required, throughout the duration of the
asbestos project and any associated demolition, renovation, remodeling or repair
project.
1900.018.061 – Robert Purcell Community Center – Rms. 102, 107(A‐G) – Directed Asbestos Sampling Report
Arctic Enterprises, Inc. Page 3 May 28, 2019
5.0 PHOTOS
Black/Green Carpet Mastic. All Carpet Mastic
Observed was on top of Concrete
A View of Cove Base and Sheetrock/Joint
Compound Present Throughout the Areas
Typical Office Space that Exists Throughout the
Area. 2’ x 2’ Ceiling Tiles can be Seen
The Wooden Panels Behind the Receptionist
Desk that are Presumed to have ACM present
behind them
1900.018.061 – Robert Purcell Community Center – Rms. 102, 107(A‐G) – Directed Asbestos Sampling Report
Arctic Enterprises, Inc. Page 4 May 28, 2019
6.0 SUMMARY
During this sampling event, asbestos‐containing materials were presumed. No asbestos‐
containing materials were identified by laboratory analysis. Sampling was limited to “accessible
materials” associated with the upcoming renovation project scheduled to be conducted in
rooms 102, 107, 107A‐G. Upon discovery of additional suspect materials, work shall stop, and
the appropriate sampling conducted in accordance with New York State Department of Labor‐
Industrial Code Rule 56 (NYCRR Part 56) requirements.
7.0 CERTIFICATION
Arctic Enterprises certifies the information in this report is based on physical and visual
inspections conducted by Arctic personnel and the data collected during the directed asbestos
bulk sampling event.
Name: Bruce Osterman Name: Janette Van Wie
Signature:
Signature:
Title: Industrial Hygienist Title:President
Arctic Enterprises, Inc. ‐ 222 Teall Avenue, Suite 100A, Syracuse, New York 13210 / (315) 476‐1757 office / (315) 476‐1764 fax
ATTACHMENT A
ARCTIC’S COMPANY LICENSE AND PERSONNEL CERTIFICATIONS
New York State – Department of Labor
Division of Safety and Health
License and Certificate Unit
State Campus, Building 12
Albany, NY 12240
ASBESTOS HANDLING LICENSE
Arctic Enterprises, Inc.
Ste100A
222 Teall Ave
Syracuse, NY 13210
FILE NUMBER: 14-75469
LICENSE NUMBER: 75469
LICENSE CLASS: FULL
DATE OF ISSUE: 03/21/2019
EXPIRATION DATE: 03/31/2020
Duly Authorized Representative – Janette Van Wie:
This license has been issued in accordance with applicable provisions of Article 30 of the Labor Law of New York State and of
the New York State Codes, Rules and Regulations (12 NYCRR Part 56). It is subject to suspension or revocation for a (1)
serious violation of state, federal or local laws with regard to the conduct of an asbestos project, or (2) demonstrated lack of
responsibility in the conduct of any job involving asbestos or asbestos material.
This license is valid only for the contractor named above and this license or a photocopy must be prominently displayed at the
asbestos project worksite. This license verifies that all persons employed by the licensee on an asbestos project in New Yor k
State have been issued an Asbestos Certificate, appropriate for the type of work they perform, by the New York State
Department of Labor.
Eileen M. Franko, Director
SH 432 (8/12) For the Commissioner of Labor
ASBESTOS CERTIFICATION
The following letter codes (as shown on the handling certificate) represent the
corresponding asbestos classifications.
A ‐ Asbestos Handler D ‐ Asbestos Inspector G ‐ Asbestos Supervisor
B ‐ Allied Trades E ‐Management Planner H ‐Asbestos Project Monitor
C ‐ Air Sampling Technician F ‐ Operations &Maintenance I ‐Asbestos Project Designer
Arctic Enterprises, Inc. ‐ 222 Teall Avenue, Suite 201, Syracuse, New York 13210 / (315) 476‐1757 office / (315) 476‐1764 fax
Arctic Enterprises, Inc. ‐ 222 Teall Avenue, Suite 201, Syracuse, New York 13210 / (315) 476‐1757 office / (315) 476‐1764 fax
ASBESTOS CERTIFICATION
The following letter codes (as shown on the handling certificate) represent the
corresponding asbestos classifications.
A ‐ Asbestos Handler D ‐ Asbestos Inspector G ‐ Asbestos Supervisor
B ‐ Allied Trades E ‐ Management Planner H ‐ Asbestos Project Monitor
C ‐ Air Sampling Technician F ‐ Operations & Maintenance I ‐ Asbestos Project Designer
Arctic Enterprises, Inc. ‐ 222 Teall Avenue, Suite 100A, Syracuse, New York 13210 / (315) 476‐1757 office / (315) 476‐1764 fax
ATTACHMENT B
ASBESTOS BULK SAMPLE LABORATORY REPORT
Arctic Enterprises, Inc. ‐ 222 Teall Avenue, Suite 100A, Syracuse, New York 13210 / (315) 476‐1757 office / (315) 476‐1764 fax
ATTACHMENT C
SAMPLE LOCATION DRAWING
CPMAS-006A (-)
SR-001A (-)
JC-002A (-)
CT-005A (-)
CB-003A (-)
CBM-004A (-)
CPMAS-006B (-)
CB-003B (-)
CBM-004B (-)
SR-001B (-)
JC-002B (-)
CT-005B (-)
PRESUMED WOOD PANEL MASTIC (DESTRUCTIVE
SAMPLING NEEDS TO BE CONDUCTED)
LEGEND
CORNELL UNIVERSITY SECTION 01 35 43
Ithaca, New York GENERAL ENVIRONMENTAL REQUIREMENTS
RPCC MAIL CENTER GENERAL ENVIRONMENTAL REQUIREMENTS 01 35 43-1
RENOVATION May 21, 2019
SECTION 01 35 43 GENERAL ENVIRONMENTAL REQUIREMENTS
1.0 GENERAL
1.1 DESCRIPTION
A. This Section and the listed Related Sections provides minimum requirements for the
protection of the environment during the project. The requirements of this Section shall apply
to both Contractor and all tiers of sub-contractors involved in the project.
B. In addition to the requirements of this Section and the listed Related Sections, all laws and
regulations by applicable local, state, and federal agencies shall apply to the work of this
contract. In some cases the requirements of these Specifications may by intention exceed
such legal requirements, but in no case shall this Specification be interpreted or understood
to reduce or eliminate such requirements.
C. Prior to bidding, review the entire Bidding Documents and report in writing to the Owner’s
Representative any error, inconsistency, or omission that may have environmental impacts.
1.2 RELATED SECTIONS
A. Section 01 35 44 – Spill Control
1.3 SUBMITTALS
A. Submit the following in accordance with Section 01 33 00 – Submittals:
1. Analytical laboratory sample results and material Certifications for all imported soil
and granular materials (“borrow”).
2. Contractor’s Waste Material Disposal Plan.
3. Proposed methods for dewatering and construction water management.
4. Analytical laboratory sample results for all waste materials.
5. Copies of manifests for all waste materials disposed of off-site.
1.4 JOB SITE ADMINISTRATION
A. In accordance with Article 2 of the General Conditions, provide a competent supervisory
representative with full authority to act for the Contractor at the site.
B. If at any time operations under the representative’s supervision do not comply with this
Section, or the representative is otherwise unsatisfactory to the Owner, replace, if requested
by the Owner, said representative with another representative satisfactory to the Owner.
There shall be no change in superintendent without the Owner's approval.
CORNELL UNIVERSITY SECTION 01 35 43
Ithaca, New York GENERAL ENVIRONMENTAL REQUIREMENTS
RPCC MAIL CENTER GENERAL ENVIRONMENTAL REQUIREMENTS 01 35 43-2
RENOVATION May 21, 2019
C. Remove from the Work any employee of the Contractor or any Subcontractor when so
directed by the Owner. The Owner may request the removal of any employee who does not
comply with these specifications.
1.5 CLEARING, SITE PREPARATION AND SITE USE
A. In accordance with Section 01 14 00, only that portion of the working area that is absolutely
necessary and essential for the work shall be cleared for construction. All clearing should be
approved and performed to provide minimum practical exposure of soils.
B. The Contractor shall make every effort to avoid the destruction of plants, trees, shrubs and
lawns outside the area of construction so as not to unduly disturb the ecological or
environmental quality of the area.
C. Topsoil excavated as part of the Project, which can be reused as part of the Project, shall be
stockpiled for future use and temporarily stabilized to prevent erosion.
1.6 NOISE AND VIBRATION
A. Limit and control the nature and extent of activities at all times to minimize the effects of
noise and vibrations. Take adequate measures for keeping noise levels, as produced by
construction related equipment, to safe and tolerable limits as set forth by the Occupational
Safety and Health Administration (OSHA), the New York State Industrial Code Guidelines
and Ordinances and all City, Town and Local ordinances. Equip all construction equipment
presenting a potential noise nuisance with noise-muffling devices adequate to meet these
requirements
1.7 DUST CONTROL
A. Take adequate measures for controlling dust produced by drilling, excavation, backfilling,
loading, saw cutting or other means. The use of calcium chloride or petroleum-based
materials for dust control is prohibited. Dust control measures are required throughout the
duration of construction.
B. If, in the opinion of the Owner’s Representative, the Contractor is not adequately controlling
dust, the Owner will first notify the Contractor. If the Contractor does not take adequate
actions necessary, the Owner may, at the Contractor’s expense, employ alternative means to
control dust.
C. Erect, maintain, and remove when appropriate barriers or other devices, including mechanical
ventilation systems, as required by the conditions of the work for the protection of users of
the project area, the protection of the work being done, or the containment of dust and debris.
All such barriers or devices shall be provided in conformance with all applicable codes, laws,
and regulations including OSHA.
CORNELL UNIVERSITY SECTION 01 35 43
Ithaca, New York GENERAL ENVIRONMENTAL REQUIREMENTS
RPCC MAIL CENTER GENERAL ENVIRONMENTAL REQUIREMENTS 01 35 43-3
RENOVATION May 21, 2019
1.8 PROTECTION OF THE ENVIRONMENT
A. Construction procedures observed by the Contractor, its subcontractors and other employees
shall include protection of the environment, in accordance with all pertinent Cornell
standards, policies, local laws, executive orders, ordinances, and federal and state regulations.
Construction procedures that are prohibited in the undertaking of work associated with this
Contract include, but are not limited to:
1. Burning trash, project debris, or waste materials.
B. Limit the nature and extent of any activities that could result in the release or discharge of
pollutants. Report any such release or discharge immediately to the Owner’s Representative
and clean up spills immediately, as detailed in Section 01 35 44 – Spill Control Procedures.
1.9 TEMPORARY RE-ROUTING OF PIPING AND DUCTWORK
A. Obtain approval from the Owner’s Representative prior to any temporary re-routing of piping
and exhaust ductwork necessary for the completion of the Work. Submit re-routing plans to
the Owner’s Representative in writing.
The following shall require approval of the Owner:
1. Temporary storm, sanitary or water line connections.
2. Temporary exhaust ductwork connections where such connections may impact air
emissions.
B. Instruct all personnel to observe extreme caution when working in the vicinity of mechanical
equipment and piping. Personnel shall not operate or tamper with any existing valves,
switches, or other devices or equipment without prior approval by the Owner’s
Representative.
1.10 HAZARDOUS OR TOXIC MATERIALS
A. Inform officers, employees, agents, contractors, subcontractors at every tier, and any other
party which may come into contact with any hazardous or toxic materials as a result of its
performance hereunder of the nature of such materials, and any health and safety or
environmental risks associated therewith.
B. Do not use hazardous or toxic materials in a manner that will violate Cornell University
Policies or any state, federal, or municipal environmental health and safety regulations. In
situations where the risks are unclear consult with Environmental Health and Safety (EH&S)
for guidance.
C. Provide complete care and treatment for any injury sustained by any parties coming into
contact with any hazardous or toxic materials as a result of Contractor’s performance or
failure to perform hereunder.
CORNELL UNIVERSITY SECTION 01 35 43
Ithaca, New York GENERAL ENVIRONMENTAL REQUIREMENTS
RPCC MAIL CENTER GENERAL ENVIRONMENTAL REQUIREMENTS 01 35 43-4
RENOVATION May 21, 2019
D. At the completion of project Contractor shall remove all unused chemical products and
hazardous materials from campus. Transportation of these materials shall be in accordance
with all federal, state, and local regulations. Request and receive written approval from
EH&S prior to disposal of any on-site disposal.
1.11 DISPOSAL OF WASTE MATERIAL AND TITLE
A. Prior to start of work and first payment, Contractor shall prepare and submit “Contractor
Waste Material Disposal Plan” to the Owner’s Representative. The plan shall identify the
waste transportation and treatment, storage or disposal (TSD) companies which will manage
all waste material and any site(s) for disposal of the waste material. Contractor must use this
form to document waste disposal methods and locations.
B. The “Contractor Waste Material Disposal Plan” form, together with definitions associated
with the form waste descriptions. Forms may be downloaded at:
https://sp.ehs.cornell.edu/env/solid-waste/construction-demolition-waste/Pages/default.aspx
C. Contractor shall be responsible for the proper cleanup, containment, storage and disposal of
any hazardous material/chemical spill occurring during its work. For Cornell University
owned hazardous waste EH&S will oversee, approve or effect the proper disposal. Title, risk
of loss, and all other incidents of ownership to the Waste Material, shall vest in Contractor at
the time Contractor or any transporter acting on its behalf takes physical possession of Waste
Material. Complete and maintain full records of the chain of custody and control, including
certificates of disposal or destruction, of all Waste Materials loaded, transported and/or
disposed of. Deliver all such records to the Owner in accordance with applicable laws and
regulations and any instructions from the Owner in a timely manner and in any event prior to
final payment(s) under this Contract.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 35 43***
CORNELL UNIVERSITY SECTION 01 35 44
Ithaca, New York SPILL CONTROL
RPCC MAIL CENTER SPILL CONTROL 01 35 44-1
RENOVATION May 21, 2019
SECTION 01 35 44 SPILL CONTROL
1.0 GENERAL
1.1 SPILL PREVENTION
A. In order to minimize the potential for discharge to the environment of oil, petroleum, or
hazardous substances on site, the following requirements shall apply to all projects:
1. All oil, petroleum, or hazardous materials stored or relocated temporarily on site during
the construction process shall be stored in such a manner as to provide protection from
vehicular damage and to provide containment of leaks or spills. Horizontal diked oil
storage tanks, temporary berms or barriers, or similar methods shall be employed as
appropriate at each site.
2. Any on-site filling or dispensing activities shall occur within an area in which a
temporary berm, boom, or similar containment barrier has been placed to prevent the
inadvertent discharge to the environment of harmful quantities of any products.
3. All oil, petroleum, or hazardous materials stored on site shall be located in such a
manner as to minimize the potential of damage from construction operations or
vehicles, away from drainage ways and environmentally sensitive areas, and in
accordance with all fire and safety codes.
B. Remove immediately from the site any storage, dispensing, or operating equipment that is
leaking oil or hazardous substances or is in anyway unsuitable for the safe storage of such
materials.
1.2 SPILL CONTROL PROCEDURES
All Contractor personnel working at the project site shall be knowledgeable of the potential health
and safety concerns associated with petroleum and other hazardous substances that could
potentially be released at the project site. Following are a list of activities that should be conducted
by the Contractor in the event of an oil/petroleum spill or the release of any other hazardous
substance. In the event of a large quantity spill that would require cleanup procedures that are
beyond the means of the Contractor, an emergency spill cleanup contractor shall be hired by the
Contractor. In the event the Contractor has the personnel necessary to clean up the spill, the
following procedures shall be followed:
A. Personnel discovering/responding to a spill shall:
1. Identify and locate the source of the spill. If unsafe conditions exist, leave the area,
inform nearby personnel, notify the site supervisor, and initiate spill reporting (Section
1. 3).
CORNELL UNIVERSITY SECTION 01 35 44
Ithaca, New York SPILL CONTROL
RPCC MAIL CENTER SPILL CONTROL 01 35 44-2
RENOVATION May 21, 2019
2. Limit the discharge of product, if safely possible, by: (1) diverting discharge to a
containment area; (2) creating temporary dikes with soils or other available materials;
and (3) utilizing sorbent materials. If secondary containment is present, verify that
valves and drains are closed prior to diverting the product to this area.
3. The individual discovering a spill shall initiate containment procedures to prevent
material from reaching a potential migratory route, through implementation of the
following actions, or any other methods necessary. Methods employed shall not
compromise worker safety.
a. Stop the spill at once (if possible).
b. Extinguish sources of ignition (e.g., flames, sparks, hot surfaces, cigarettes, etc.).
c. Clear personnel from the spill location and rope off the area.
d. Utilize available spill control equipment in an effort to ensure that fires,
explosions, and releases do not occur, recur, or spread.
e. Use sorbent materials to control the spill at the source.
f. Construct a temporary containment dike of sorbent materials, cinder blocks,
bricks, or other suitable materials to help contain the spill.
g. Attempt to identify the character, exact source, amount, and area of the released
materials. Identification of the spilled material should be made as soon as possible
so that the appropriate cleanup procedure can be identified.
h. Assess possible hazards to human health or the environment as a result of the
release, fire, or explosion.
i. If spill response measures involve the temporary cessation of any operations, the
Contractor shall monitor the affected equipment for: (1) leaks; (2) pressure
buildup; (3) gas generation; or (4) ruptures in valves, pipes, or other equipment.
B. Spill Cleanup:
1. Following containment of the spill, the following spill cleanup procedures shall be
initiated.
a. Use proper waste containers.
b. Remove bulk liquid by using vacuum, pump, sorbents, or shovel and place
material in properly labeled waste container. Be sure not to collect incompatible
or reactive substances in the same container.
c. Cleanup materials not reclaimed on-site shall be disposed of in accordance with
all applicable state and federal regulations.
CORNELL UNIVERSITY SECTION 01 35 44
Ithaca, New York SPILL CONTROL
RPCC MAIL CENTER SPILL CONTROL 01 35 44-3
RENOVATION May 21, 2019
d. Apply sorbent materials to pick up remaining liquid after bulk liquid has been
removed. The Contractor shall not walk over spilled material. Absorbed material
shall be picked up with a shovel and placed in a separate waste container, and
shall not be mixed with bulk liquid.
e. Clean spill control equipment and containers. Replace equipment in its proper
location. Restock or reorder any sorbents used to clean up the spill.
f. Carefully wash spilled product from skin and clothing using soap. Change
clothes, if necessary, to avoid further contact with product.
g. Disposal of all spilled product shall be made off-site, and shall be arranged
through the Contractor.
h. A Spill Report shall be completed, including a description of the event. A sample
Spill Documentation Form is provided in Appendix B.
C. Fire or Explosion:
1. In the event of a fire or explosion at the site, the Contractor shall:
a. Verify that the local fire department and the appropriate response personnel (e.g.,
ambulance, police) have been notified.
b. Report to the scene, if safe to do so, and evaluate the situation (e.g., spill character,
source, etc.). Coordinate, as necessary, with other appropriate site and emergency
personnel.
c. Ensure that people are cleared from the area.
d. Ensure that fires are safely extinguished (if possible), valves closed, and other
immediate actions necessary to mitigate the emergency, if safe to do so.
e. Initiate responsible measures necessary to prevent subsequent fires, explosions,
or releases from occurring or spreading to other areas of the site. These measures
include stopping processes or operations, collecting and containing released oil,
or removing and isolating containers.
f. Take appropriate action to monitor for: (1) leaks; (2) pressure build-ups; (3) gas
generation; or (4) ruptures in pipes, valves, or other equipment.
CORNELL UNIVERSITY SECTION 01 35 44
Ithaca, New York SPILL CONTROL
RPCC MAIL CENTER SPILL CONTROL 01 35 44-4
RENOVATION May 21, 2019
1.3 SPILL REPORTING AND DOCUMENTATION
In the event of a spill CALL CORNELL POLICE AT 255-1111 who will notify the appropriate
departments within the university and coordinate with the contractor for external reporting, if
required.
The contractor shall be responsible for the initiation of spill reporting and documentation
procedures. All petroleum spills must be reported to NYSDEC Spill Hotline at 1-800- 457-7362,
less than two hours following discovery. Notification must be made to Cornell Environmental
Health and Safety (EH&S), 607.255.8200, within 24 hours of reporting the release. The Contractor
will be expected to provide EH&S with the DEC issued spill number. Any petroleum spill must
be reported to NYSDEC unless ALL of the following criteria apply:
TABLE 1
CRITERIA TO EXEMPT SPILL REPORTING
CRITERIA DESCRIPTION
Quantity The spill must be known to be less than 5 gallons.
Containment The spill must be contained on an impervious surface or within an
impervious structure, such that it cannot enter the environment.
Control The spill must be under control and not reach a drain or leave the impervious
surface.
Cleanup The spill must be cleaned-up within two hours of occurrence.
Environment The spill must not have already entered into the soil or groundwater or onto
surface water.
A release of a “reportable quantity”1 or unknown amount of a hazardous substance must also be
immediately reported to NYSDEC Spill Hotline. Spills of reportable quantities of chemicals or
“harmful quantities”2 of oil to navigable waters must be reported to the federal National Response
Center, 1-800-424-8802.
Spill Reporting Information: When making a telephone report, the caller should be prepared to
provide the following information, if possible:
1. The date and time of the spill or release.
2. The identity or chemical name of the material released or spilled, including an
indication of whether the material is defined as an extremely hazardous substance.
3. An estimate of the quantity of material released or spilled into the environment and the
approximate duration of the event.
4. The exact location of the spill, including the name(s) of the waters involved or
threatened, and/or other medium or media affected by the release or spill.
5. The source of the release or spill.
6. The name, address, and telephone number of the party in charge of, or responsible for,
the facility or activity associated with the release or spill.
7. The extent of the actual and potential water pollution.
CORNELL UNIVERSITY SECTION 01 35 44
Ithaca, New York SPILL CONTROL
RPCC MAIL CENTER SPILL CONTROL 01 35 44-5
RENOVATION May 21, 2019
8. The name and telephone number of the person in charge of operations at the spill site.
9. The steps being taken or proposed to contain and cleanup the released or spilled material
and any precautions taken to minimize impacts, including evacuation.
10. The extent of injuries, if any.
11. Any known or anticipated acute or chronic health risks associated with the emergency,
and information regarding necessary medical attention for exposed individuals.
12. Assistance required, if any.
If the release of a hazardous substance or oil occurs in an amount which exceeds a reportable
quantity (RQ) as defined in 40 CFR Part 110, 40 CFR Part 117, 40 CFR Part 302, or 6
NYCRR Part 597, then the Contractor shall do the following:
1. Call to the National Response Center shall be made by the person in charge of the site.
The applicable phone numbers are 1-800-424-8802 or 1-202-426-2675.
2. Within 14 days of the release, submit a written description of the release. The description
should include: (1) a description of the release, (2) the type of material released, (3)
estimated amount of the spill; (4) the date of the release, (5) an explanation of why the
release occurred; and (6) a description of the measures to be implemented to prevent and
control future releases.
(1)Reportable Quantity: A Reportable Quantity is the quantity of a hazardous substance or oil that
triggers reporting requirements under the Comprehensive Emergency Response, Compensation,
and Liability Act (CERCLA) (USEPA, September 1992). While the Contractor is legally
responsible for knowing the risks of materials that are part of construction, members of the owner’s
spill response team have access to information that may help identify these quantities with you.
(2)Harmful Quantity: A Harmful Quantity of oil includes discharges that violate applicable water
quality standards; cause a film, sheen, or discoloration on a water surface or adjoining shoreline;
or cause a sludge or emulsion to be deposited beneath the water surface or shoreline (40 CFR
110.3).
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 35 44***
CORNELL UNIVERSITY SECTION 01 41 00
Ithaca, New York REGULATORY REQUIREMENTS
RPCC MAIL CENTER REGULATORY REQUIREMENTS 01 41 00-1
RENOVATION May 21, 2019
SECTION 01 41 00 REGULATORY REQUIREMENTS
1.0 GENERAL
1.1 PERMITS AND LICENSES
A. The Contractor shall obtain, maintain and pay for all permits and licenses necessary for the
execution of the Work and for the use of such Work when completed. Such permits shall
include but are not limited to building, electrical, plumbing, backflow prevention, dig safe,
fill, street use and building demolition.
1. City of Ithaca building permit applications shall be presented for review at the regularly
scheduled Owner’s meeting with the Authority Having Jurisdiction (AHJ).
B. For any projects which include demolition of a structure or load-bearing elements of a
structure, the Contractor is required to complete a “Notification of Demolition and
Renovation” and provide this notification to the United State Environmental Protection
Agency (EPA) in advance of the work as specified in 40 CFR 61.145. The Contractor shall
also provide a copy of this notification to the Owner’s Representative prior to any demolition.
C. All Construction / Building / Hot Work and Occupancy permits shall be issued and
maintained through the City of Ithaca.
D. Ithaca Fire Department Permitting:
1. A permit is required from the Ithaca Fire Department to install or substantially repair a
fire suppression, fire detection, or fire alarm system as such as defined under the
Uniform Code of New York State.
2. If the scope of work is classified under the Existing Building Code of NYS as Alteration
–Level 1; Alteration – Level 2; Alteration – Level 3; or Addition; a permit from the
Ithaca Fire Department is required for all work affecting the fire suppression, fire
detection, or fire alarm system for that building. A building permit is also required for
this type of work.
3. Work classified as a ‘Repair’ under the Existing Building Code of NYS does not require
a permit from the Ithaca Fire Department.
1.2 INSPECTIONS
A. Apply for and obtain all required inspections, pay all fees and charges for same, include all
service charges, pavement cuts and repairs.
1.3 COMPLIANCE
A. The Contractor shall give all notices, pay all fees and comply with all laws, rules and
regulations applicable to the Work.
CORNELL UNIVERSITY SECTION 01 41 00
Ithaca, New York REGULATORY REQUIREMENTS
RPCC MAIL CENTER REGULATORY REQUIREMENTS 01 41 00-2
RENOVATION May 21, 2019
1.4 OWNER’S REQUIREMENTS
A. The Contractor, Subcontractors, and employees of the Contractor and Subcontractors shall
comply with all regulations governing conduct, access to the premises, operation of
equipment and systems, and conduct while in or near the premises and shall perform the Work
in such a manner as not to unreasonably interrupt or interfere with the conduct of business of
the Owner.
B. Upon completion of the project, the Contractor agrees to provide the Owner with a summary
of municipal permit fees paid. This shall include the name of the permits secured, the permit
fees paid by the Contractor and a copy of the permit. If no permit fees were required, the
Contractor shall so state, in writing, upon completion of the project.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 41 00***
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-1
RENOVATION May 21, 2019
SECTION 01 42 00 REFERENCES
1.0 GENERAL
1.1 INTENT OF CONTRACT DOCUMENTS
A. Notes or instructions shown on any one Drawing, apply where applicable, to all other Drawings.
B. All references to codes, specifications and standards referred to in the Specification Sections and
on the Drawings shall mean, and are intended to be, the latest edition, amendment and/or revision
of such reference standard in effect as of the date of these Contract Documents.
C. Install All Work in Compliance with:
1. NYS Uniform Code
a. International Building Code
b. International Residential Code
c. International Existing Building Code
d. International Fire Code
e. International Plumbing Code
f. International Mechanical Code
g. International Fuel Gas Code
h. International Property Maintenance Code
i. Uniform Code Supplement
2. NYS Energy Code
a. International Energy Conservation Code
b. ASHRAE 90.1
c. Energy Code Supplement
3. National Electric Code
4. Occupational Safety and Health Administration (OSHA).
5. Life Safety Code NFPA 101.
6. All local ordinances
7. Plans and Specifications in excess of code requirements and not contrary to same.
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-2
RENOVATION May 21, 2019
1.2 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and other Division 1
Specification Sections, apply to this Section.
1.3 DEFINITIONS
A. “General”: Basic Contract definitions are included in the Conditions of the Contract.
B. “Contract Documents”: The Contract Documents consist of the Agreement between Owner
and Contractor, General Conditions, General Requirements, Drawings, Specifications,
addenda issued before execution of the Agreement, other documents listed in the Agreement,
and modifications issued after execution of the Agreement.
C. “The Contract”: The Contract Documents form the Contract for construction and represent
the entire integrated Agreement between the Owner and Contractor.
D. “The Work”: The work comprises the completed construction required by the Contract
Documents and includes all labor necessary to produce such construction and all materials
and equipment incorporated in such construction.
E. “Owner”: Cornell University a New York corporation.
F. “Architect/Engineer”: The Architect or Engineer is the person lawfully licensed to practice
architecture and/or engineering in the state of New York, identified as such in the Owner
Contractor Agreement, and is referred to throughout the Contract Documents as if singular in
number. The terms Architect and/or Engineer mean the Architect and/or his authorized
representative.
G. “Contractor”: The Contractor, person, firm, or corporation with whom the Construction
Agreement contract is made by Owner.
H. “Subcontractor”: A person, firm, or corporation, supplying labor and/or materials for work
at site of the project for and under separate contract or agreement with Contractor.
I. “As Approved” or “Approved”: Architect’s or Owner’s approval.
J. “As Directed”: Owner’s direction or instruction. Other terms including "requested,"
"authorized," "selected," "required," and "permitted" have the same meaning as "directed."
K. “Indicated”: Requirements expressed by graphic representations or in written form on
Drawings, in Specifications, and in other Contract Documents. Other terms including
"shown," "noted," "scheduled," and "specified" have the same meaning as “indicated.”
L. “Regulations”: Laws, ordinances, statutes, and lawful orders issued by authorities having
jurisdiction, and rules, conventions, and agreements within the construction industry that
control performance of the Work.
M. “Furnish”: Supply and deliver to Project site, ready for unloading, unpacking, assembly,
installation, and similar operations.
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-3
RENOVATION May 21, 2019
N. "Install": Operations at Project site including unloading, temporarily storing, unpacking,
assembling, erecting, placing, anchoring, applying, working to dimension, finishing, curing,
protecting, cleaning, and similar operations.
O. “Reinstall”. To place back into a former position.
P. “Replace”. Provide a substitute for.
Q. “Provide”: Furnish and install, complete and ready for the intended use.
R. “Concealed’: Work installed in pipe shafts, chases or recesses, behind furred walls, above
ceilings, either permanent or removable.
S. “Exposed”: All capital Work not identified as concealed.
T. “Project Site”: Space available for performing construction activities. The extent of Project
site is shown on Drawings and may or may not be identical with the description of the land
on which Project is to be built.
U. “As-Built Documents”: Drawings and other records that are maintained by the Contractor to
record all conditions which exist when the building construction is completed. This includes
both the elements of the project itself and existing elements that are encountered during the
course of project construction.
V. “Record Drawings”: Shows construction changes in the project and the final location of all
services, lines, outlets, and connections including underground and concealed items. The
“record” drawings shall be compiled by the Architect based on the working as-built drawings
and revised in accordance with the marked up drawings submitted by the Contractor.
W. “Shop Drawings”: Drawings, diagrams, illustrations, charts, brochures, and other data that
are prepared by Contractor or any Subcontractor, manufacturer, supplier or distributor, for
some portion of the work.
X. “Samples”: Physical examples furnished to illustrate materials, equipment or workmanship,
and to establish standards by which the work will be judged.
Y. “General Conditions”: The standardized contractual provisions describing the
responsibilities, rights and relationships of the Owner and Contractor under the construction
contract.
Z. “Contract Limit Lines”: A limit line or perimeter line established on the drawings or
elsewhere in the contract documents defining the boundaries of the site available to the
contractor for construction purposes.
AA. "to do", "provide", "furnish", "install", etc., in these Specifications or on Drawings are
directions given to the Contractor;
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-4
RENOVATION May 21, 2019
1.4 OWNER AGREEMENTS
A. Cornell University and the Tompkins-Cortland Counties Building Trades Council,
Maintenance Division have entered into an agreement. The local unions which are members
of the Tompkins-Cortland Counties Building Trades Council, Maintenance Division are as
follows:
Local #241 - International Brotherhood of Electrical Workers
Local #267 - United Association of Plumbers and Steamfitters
Local #281 - United Brotherhood of Carpenters
Local #3NY - International Union of Bricklayers and Allied Craftworkers
Local #178 - International Union of Painters and Allied Trades
Local #112 - International Brotherhood of Sheetmetal Workers
Local #785 - Laborers International Union of North America
The definition of craft maintenance as applied to this agreement shall be as follows:
All work associated with the demolition, repair, replacement, improvement to or construction
of equipment, buildings, structures, utilities, and/or system or components thereof. Craft
maintenance for trades assistants shall be limited to work assigned to individuals employed
as building trade laborers and which directly assists the craft work performed by other
employees covered by this agreement; the Employer is free to assign such work; provided,
however, such assignment does not fall within the craft performed by other employees
covered by this agreement.
1.5 INDUSTRY STANDARDS
A. Applicability of Standards: Unless the Contract Documents include more stringent
requirements, applicable construction industry standards have the same force and effect as if
bound or copied directly into the Contract Documents to the extent referenced. Such
standards are made a part of the Contract Documents by reference.
B. Publication Dates: Comply with standards in effect as of date of the Contract Documents
unless otherwise indicated.
C. Copies of Standards: Each entity engaged in construction on Project should be familiar with
industry standards applicable to its construction activity. Copies of applicable standards are
not bound with the Contract Documents.
1. Where copies of standards are needed to perform a required construction activity, obtain
copies directly from publication source.
D. Abbreviations and Acronyms for Standards and Regulations: Where abbreviations and
acronyms are used in Specifications or other Contract Documents, they shall mean the
recognized name of the organizations responsible for the standards and regulations in the
following list. Names, telephone numbers, and Web sites are subject to change and are
believed to be accurate and up-to-date as of the date of the Contract Documents.
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-5
RENOVATION May 21, 2019
ADAAG Americans with Disabilities Act (ADA) (800) 872-2253
Architectural Barriers Act (ABA) (202) 272-0080
Accessibility Guidelines for Buildings and Facilities
Available from Access Board
www.access-board.gov
CFR Code of Federal Regulations (866) 512-1800
Available from Government Printing Office (202) 512-1800
www.gpoaccess.gov/cfr/index.html
FS Federal Specification (215) 697-6257
Available from Department of Defense Single Stock Point
http://dodssp.daps.dla.mil
Available from Defense Standardization Program
www.dps.dla.mil
Available from General Services Administration (202) 619-8925
www.gsa.gov
Available from National Institute of Building Sciences (202) 289-7800
www.nibs.org
UFAS Uniform Federal Accessibility Standards (800) 872-2253
Available from Access Board (202) 272-0080
www.access-board.gov
1.6 ABBREVIATIONS AND ACRONYMS
A. Industry Organizations: Where abbreviations and acronyms are used in Specifications or
other Contract Documents, they shall mean the recognized name of the entities in the
following list. Names, telephone numbers, and Web sites are subject to change and are
believed to be accurate and up-to-date as of the date of the Contract Documents.
AA Aluminum Association, Inc. (The) (703) 358-2960
www.aluminum.org
AAADM American Association of Automatic Door Manufacturers (216) 241-7333
www.aaadm.com
AABC Associated Air Balance Council (202) 737-0202
www.aabchq.com
AAMA American Architectural Manufacturers Association (847) 303-5664
www.aamanet.org
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-6
RENOVATION May 21, 2019
AASHTO American Association of State Highway and (202) 624-5800
Transportation Officials
www.transportation.org
AATCC American Association of Textile Chemists and Colorists (The) (919) 549-8141
www.aatcc.org
ABAA Air Barrier Association of America (866) 956-5888
www.airbarrier.org
ABMA American Bearing Manufacturers Association (202) 367-1155
www.abma-dc.org
ACI ACI International (248) 848-3700
(American Concrete Institute)
www.aci-int.org
ACPA American Concrete Pipe Association (972) 506-7216
www.concrete-pipe.org
AEIC Association of Edison Illuminating Companies, Inc. (The) (205) 257-2530
www.aeic.org
AF&PA American Forest & Paper Association (800) 878-8878
www.afandpa.org (202) 463-2700
AGA American Gas Association (202) 824-7000
www.aga.org
AGC Associated General Contractors of America (The) (703) 548-3118
www.agc.org
AHAM Association of Home Appliance Manufacturers (202) 872-5955
www.aham.org
AI Asphalt Institute (859) 288-4960
www.asphaltinstitute.org
AIA American Institute of Architects (The) (800) 242-3837
www.aia.org (202) 626-7300
AISC American Institute of Steel Construction (800) 644-2400
www.aisc.org (312) 670-2400
AISI American Iron and Steel Institute (202) 452-7100
www.steel.org
AITC American Institute of Timber Construction (303) 792-9559
www.aitc-glulam.org
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-7
RENOVATION May 21, 2019
ALCA Associated Landscape Contractors of America
(Now PLANET - Professional Landcare Network)
ALSC American Lumber Standard Committee, Incorporated (301) 972-1700
www.alsc.org
AMCA Air Movement and Control Association International, Inc. (847) 394-0150
www.amca.org
ANSI American National Standards Institute (202) 293-8020
www.ansi.org
AOSA Association of Official Seed Analysts, Inc. (505) 522-1437
www.aosaseed.com
APA APA - The Engineered Wood Association (253) 565-6600
www.apawood.org
APA Architectural Precast Association (239) 454-6989
www.archprecast.org
API American Petroleum Institute (202) 682-8000
www.api.org
ARI Air-Conditioning & Refrigeration Institute (703) 524-8800
www.ari.org
ARMA Asphalt Roofing Manufacturers Association (202) 207-0917
www.asphaltroofing.org
ASCE American Society of Civil Engineers (800) 548-2723
www.asce.org (703) 295-6300
ASHRAE American Society of Heating, Refrigerating and (800) 527-4723
Air-Conditioning Engineers (404) 636-8400
www.ashrae.org
ASME ASME International (800) 843-2763
(The American Society of Mechanical Engineers International) (973) 882-1170
www.asme.org
ASSE American Society of Sanitary Engineering (440) 835-3040
www.asse-plumbing.org
ASTM ASTM International (610) 832-9585
(American Society for Testing and Materials International)
www.astm.org
AWI Architectural Woodwork Institute (800) 449-8811
www.awinet.org (703) 733-0600
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-8
RENOVATION May 21, 2019
AWPA American Wood-Preservers' Association (334) 874-9800
www.awpa.com
AWS American Welding Society (800) 443-9353
www.aws.org (305) 443-9353
AWWA American Water Works Association (800) 926-7337
www.awwa.org (303) 794-7711
BHMA Builders Hardware Manufacturers Association (212) 297-2122
www.buildershardware.com
BIA Brick Industry Association (The) (703) 620-0010
www.bia.org
BICSI BICSI (800) 242-7405
www.bicsi.org (813) 979-1991
BISSC Baking Industry Sanitation Standards Committee (866) 342-4772
www.bissc.org
CCC Carpet Cushion Council (203) 637-1312
www.carpetcushion.org
CDA Copper Development Association (800) 232-3282
www.copper.org (212) 251-7200
CGA Compressed Gas Association (703) 788-2700
www.cganet.com
CIMA Cellulose Insulation Manufacturers Association (888) 881-2462
www.cellulose.org (937) 222-2462
CISCA Ceilings & Interior Systems Construction Association (630) 584-1919
www.cisca.org
CISPI Cast Iron Soil Pipe Institute (423) 892-0137
www.cispi.org
CLFMI Chain Link Fence Manufacturers Institute (301) 596-2583
www.chainlinkinfo.org
CPA Composite Panel Association (301) 670-0604
www.pbmdf.com
CPPA Corrugated Polyethylene Pipe Association (800) 510-2772
www.cppa-info.org (202) 462-9607
CRI Carpet & Rug Institute (The) (800) 882-8846
www.carpet-rug.com (706) 278-3176
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-9
RENOVATION May 21, 2019
CRSI Concrete Reinforcing Steel Institute (847) 517-1200
www.crsi.org
CSI Cast Stone Institute (770) 972-3011
www.caststone.org
CSI Construction Specifications Institute (The) (800) 689-2900
www.csinet.org (703) 684-0300
CSSB Cedar Shake & Shingle Bureau (604) 820-7700
www.cedarbureau.org
CTI Cooling Technology Institute (281) 583-4087
www.cti.org
DHI Door and Hardware Institute (703) 222-2010
www.dhi.org
EIA Electronic Industries Alliance (703) 907-7500
www.eia.org
EIMA EIFS Industry Members Association (800) 294-3462
www.eima.com (770) 968-7945
EJCDC Engineers Joint Contract Documents Committee (703) 295-5000
www.ejdc.org
EJMA Expansion Joint Manufacturers Association, Inc. (914) 332-0040
www.ejma.org
ESD ESD Association (315) 339-6937
www.esda.org
FMG FM Global (401) 275-3000
www.fmglobal.com
FSA Fluid Sealing Association (610) 971-4850
www.fluidsealing.com
FSC Forest Stewardship Council 49 228 367 66 0
www.fsc.org
GA Gypsum Association (202) 289-5440
www.gypsum.org
GANA Glass Association of North America (785) 271-0208
www.glasswebsite.com
GS Green Seal (202) 872-6400
www.greenseal.org
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-10
RENOVATION May 21, 2019
GSI Geosynthetic Institute (610) 522-8440
www.geosynthetic-institute.org
HI Hydraulic Institute (888) 786-7744
www.pumps.org (973) 267-9700
HI Hydronics Institute (908) 464-8200
www.gamanet.org
HPVA Hardwood Plywood & Veneer Association (703) 435-2900
www.hpva.org
HPW H. P. White Laboratory, Inc. (410) 838-6550
www.hpwhite.com
IBR Institute of Boiler & Radiation Manufacturers
ICEA Insulated Cable Engineers Association, Inc. (770) 830-0369
www.icea.net
ICRI International Concrete Repair Institute, Inc. (847) 827-0830
www.icri.org
IEC International Electrotechnical Commission 41 22 919 02 11
www.iec.ch
IEEE Institute of Electrical and Electronics Engineers, Inc. (The) (212) 419-7900
www.ieee.org
IESNA Illuminating Engineering Society of North America (212) 248-5000
www.iesna.org
IEST Institute of Environmental Sciences and Technology (847) 255-1561
www.iest.org
IGCC Insulating Glass Certification Council (315) 646-2234
www.igcc.org
IGMA Insulating Glass Manufacturers Alliance (613) 233-1510
www.igmaonline.org
ILI Indiana Limestone Institute of America, Inc. (812) 275-4426
www.iliai.com
ISO International Organization for Standardization 41 22 749 01 11
www.iso.ch
Available from ANSI (202) 293-8020
www.ansi.org
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-11
RENOVATION May 21, 2019
ISSFA International Solid Surface Fabricators Association (877) 464-7732
www.issfa.net (702) 567-8150
ITS Intertek (800) 345-3851
www.intertek.com (713) 407-3500
ITU International Telecommunication Union 41 22 730 51 11
www.itu.int/home
KCMA Kitchen Cabinet Manufacturers Association (703) 264-1690
www.kcma.org
LMA Laminating Materials Association
(Now part of CPA)
LPI Lightning Protection Institute (800) 488-6864
www.lightning.org (804) 314-8955
MBMA Metal Building Manufacturers Association (216) 241-7333
www.mbma.com
MFMA Maple Flooring Manufacturers Association, Inc. (847) 480-9138
www.maplefloor.org
MFMA Metal Framing Manufacturers Association (312) 644-6610
www.metalframingmfg.org
MHIA Material Handling Industry of America (800) 345-1815
www.mhia.org (704) 676-1190
MIA Marble Institute of America (440) 250-9222
www.marble-institute.com
MPI Master Painters Institute (888) 674-8937
www.paintinfo.com
MSS Manufacturers Standardization Society of The Valve and (703) 281-6613
Fittings Industry Inc.
www.mss-hq.com
NAAMM National Association of Architectural Metal Manufacturers (312) 332-0405
www.naamm.org
NACE NACE International (800) 797-6623
(National Association of Corrosion Engineers International) (281) 228-6200
www.nace.org
NADCA National Air Duct Cleaners Association (202) 737-2926
www.nadca.com
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-12
RENOVATION May 21, 2019
NAIMA North American Insulation Manufacturers Association (703) 684-0084
www.naima.org
NBGQA National Building Granite Quarries Association, Inc. (800) 557-2848
www.nbgqa.com
NCAA National Collegiate Athletic Association (The) (317) 917-6222
www.ncaa.org
NCMA National Concrete Masonry Association (703) 713-1900
www.ncma.org
NCPI National Clay Pipe Institute (262) 248-9094
www.ncpi.org
NCTA National Cable & Telecommunications Association (202) 775-3550
www.ncta.com
NEBB National Environmental Balancing Bureau (301) 977-3698
www.nebb.org
NECA National Electrical Contractors Association (301) 657-3110
www.necanet.org
NeLMA Northeastern Lumber Manufacturers' Association (207) 829-6901
www.nelma.org
NEMA National Electrical Manufacturers Association (703) 841-3200
www.nema.org
NETA International Electrical Testing Association (888) 300-6382
www.netaworld.org (303) 697-8441
NFHS National Federation of State High School Associations (317) 972-6900
www.nfhs.org
NFPA NFPA (800) 344-3555
(National Fire Protection Association) (617) 770-3000
www.nfpa.org
NFRC National Fenestration Rating Council (301) 589-1776
www.nfrc.org
NGA National Glass Association (866) 342-5642
www.glass.org (703) 442-4890
NHLA National Hardwood Lumber Association (800) 933-0318
www.natlhardwood.org (901) 377-1818
NLGA National Lumber Grades Authority (604) 524-2393
www.nlga.org
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-13
RENOVATION May 21, 2019
NOFMA NOFMA: The Wood Flooring Manufacturers Association (901) 526-5016
www.nofma.org
NRCA National Roofing Contractors Association (800) 323-9545
www.nrca.net (847) 299-9070
NRMCA National Ready Mixed Concrete Association (888) 846-7622
www.nrmca.org (301) 587-1400
NSF NSF International (800) 673-6275
(National Sanitation Foundation International) (734) 769-8010
www.nsf.org
NSSGA National Stone, Sand & Gravel Association (800) 342-1415
www.nssga.org (703) 525-8788
NTMA National Terrazzo & Mosaic Association, Inc. (The) (800) 323-9736
www.ntma.com (540) 751-0930
NYBFU New York Board of Fire Underwriters (212) 227-3700
www.nybfu.org
PCI Precast/Prestressed Concrete Institute (312) 786-0300
www.pci.org
PDCA Painting & Decorating Contractors of America (800) 332-7322
www.pdca.com (314) 514-7322
PDI Plumbing & Drainage Institute (800) 589-8956
www.pdionline.org (978) 557-0720
PGI PVC Geomembrane Institute (217) 333-3929
http://pgi-tp.ce.uiuc.edu
PLANET Professional Landcare Network (800) 395-2522
www.landcarenetwork.org
PTI Post-Tensioning Institute (602) 870-7540
www.post-tensioning.org
RCSC Research Council on Structural Connections (800) 644-2400
www.boltcouncil.org (312) 670-2400
RFCI Resilient Floor Covering Institute (301) 340-8580
www.rfci.com
RIS Redwood Inspection Service (888) 225-7339
www.calredwood.org (415) 382-0662
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-14
RENOVATION May 21, 2019
SAE SAE International (877) 606-7323
www.sae.org (724) 776-4841
SBI Steel Boiler Institute
SDI Steel Deck Institute (847) 458-4647
www.sdi.org
SDI Steel Door Institute (440) 899-0010
www.steeldoor.org
SEFA Scientific Equipment and Furniture Association (516) 294-5424
www.sefalabs.com
SGCC Safety Glazing Certification Council (315) 646-2234
www.sgcc.org
SIA Security Industry Association (703) 683-2075
www.siaonline.org
SJI Steel Joist Institute (843) 626-1995
www.steeljoist.org
SMA Screen Manufacturers Association (561) 533-0991
www.smacentral.org
SMACNA Sheet Metal and Air Conditioning Contractors' (703) 803-2980
National Association
www.smacna.org
SMPTE Society of Motion Picture and Television Engineers (914) 761-1100
www.smpte.org
SPFA Spray Polyurethane Foam Alliance (800) 523-6154
www.sprayfoam.org
SPIB Southern Pine Inspection Bureau (The) (850) 434-2611
www.spib.org
SPRI Single Ply Roofing Industry (781) 647-7026
www.spri.org
SSINA Specialty Steel Industry of North America (800) 982-0355
www.ssina.com (202) 342-8630
SSPC SSPC: The Society for Protective Coatings (877) 281-7772
www.sspc.org (412) 281-2331
STI Steel Tank Institute (847) 438-8265
www.steeltank.com
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-15
RENOVATION May 21, 2019
SWI Steel Window Institute (216) 241-7333
www.steelwindows.com
SWRI Sealant, Waterproofing, & Restoration Institute (816) 472-7974
www.swrionline.org
TCA Tile Council of America, Inc. (864) 646-8453
www.tileusa.com
TIA/EIA Telecommunications Industry Association/Electronic (703) 907-7700
Industries Alliance
www.tiaonline.org
TMS The Masonry Society (303) 939-9700
www.masonrysociety.org
TPI Truss Plate Institute, Inc. (703) 683-1010
www.tpinst.org
TPI Turfgrass Producers International (847) 649-5555
www.turfgrasssod.org
TRI Tile Roofing Institute (312) 670-4177
www.tileroofing.org
UFPO Underground Facilities Protective Organization (800) 962-7962
www.ufpo.org (800) 962-7811
UL Underwriters Laboratories Inc. (877) 854-3577
www.ul.com (847) 272-8800
UNI Uni-Bell PVC Pipe Association (972) 243-3902
www.uni-bell.org
USGBC U.S. Green Building Council (202) 828-7422
www.usgbc.org
WASTEC Waste Equipment Technology Association (800) 424-2869
www.wastec.org (202) 244-4700
WCSC Window Covering Safety Council (800) 506-4636
www.windowcoverings.org
WDMA Window & Door Manufacturers Association (800) 223-2301
www.wdma.com
WI Woodwork Institute (916) 372-9943
www.wicnet.org
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-16
RENOVATION May 21, 2019
WMMPA Wood Moulding & Millwork Producers Association (800) 550-7889
www.wmmpa.com (530) 661-9591
WSRCA Western States Roofing Contractors Association (800) 725-0333
www.wsrca.com (650) 570-5441
WWPA Western Wood Products Association (503) 224-3930
www.wwpa.org
B. Code Agencies: Where abbreviations and acronyms are used in Specifications or other
Contract Documents, they shall mean the recognized name of the entities in the following
list. Names, telephone numbers, and Web sites are subject to change and are believed to be
accurate and up-to-date as of the date of the Contract Documents.
IAPMO International Association of Plumbing and Mechanical Officials (909) 472-4100
www.iapmo.org
ICC International Code Council (888) 422-7233
www.iccsafe.org (703) 931-4533
ICC-ES ICC Evaluation Service, Inc. (800) 423-6587
www.icc-es.org (562) 699-0543
NEC National Electric Code
C. Federal Government Agencies: Where abbreviations and acronyms are used in Specifications
or other Contract Documents, they shall mean the recognized name of the entities in the
following list. Names, telephone numbers, and Web sites are subject to change and are
believed to be accurate and up-to-date as of the date of the Contract Documents.
CE Army Corps of Engineers
www.usace.army.mil
CPSC Consumer Product Safety Commission (800) 638-2772
www.cpsc.gov (301) 504-7923
DOC Department of Commerce (202) 482-2000
www.commerce.gov
DOD Department of Defense (215) 697-6257
http://.dodssp.daps.dla.mil
DOE Department of Energy (202) 586-9220
www.energy.gov
EPA Environmental Protection Agency (202) 272-0167
www.epa.gov
CORNELL UNIVERSITY SECTION 01 42 00
Ithaca, New York REFERENCES
RPCC MAIL CENTER REFERENCES 01 42 00-17
RENOVATION May 21, 2019
FAA Federal Aviation Administration (866) 835-5322
www.faa.gov
FCC Federal Communications Commission (888) 225-5322
www.fcc.gov
FDA Food and Drug Administration (888) 463-6332
www.fda.gov
GSA General Services Administration (800) 488-3111
www.gsa.gov
HUD Department of Housing and Urban Development (202) 708-1112
www.hud.gov
LBL Lawrence Berkeley National Laboratory (510) 486-4000
www.lbl.gov
NCHRP National Cooperative Highway Research Program
(See TRB)
NIST National Institute of Standards and Technology (301) 975-6478
www.nist.gov
OSHA Occupational Safety & Health Administration (800) 321-6742
www.osha.gov (202) 693-1999
PBS Public Building Service
(See GSA)
PHS Office of Public Health and Science (202) 690-7694
www.osophs.dhhs.gov/ophs
RUS Rural Utilities Service (202) 720-9540
(See USDA)
SD State Department (202) 647-4000
www.state.gov
TRB Transportation Research Board (202) 334-2934
www.nas.edu/trb
USDA Department of Agriculture (202) 720-2791
www.usda.gov
USPS Postal Service (202) 268-2000
www.usps.com
2.0 PRODUCTS - NOT USED
3.0 EXECUTION - NOT USED
***END OF SECTION 01 42 00***
CORNELL UNIVERSITY SECTION 01 45 00
Ithaca, New York QUALITY CONTROL
RPCC MAIL CENTER QUALITY CONTROL 01 45 00-1
RENOVATION May 21, 2019
SECTION 01 45 00 QUALITY CONTROL
1.0 GENERAL
1.1 DESCRIPTION
A. The Contractor shall provide and maintain an effective Contractor Quality Control (CQC)
program and perform sufficient inspections and tests of all items of work, including those of
Subcontractors, to ensure compliance with Contract Documents. Include surveillance and
tests specified in the technical sections of the Specifications. Furnish appropriate facilities,
instruments, and testing devices required for performance of the quality control function.
Controls must be adequate to cover construction operations and be keyed to the construction
sequence. Construction shall not begin until the Owner has approved the CQC program.
1.2 CONTROL OF ON-SITE CONSTRUCTION
A. Include a control system for the following phases of inspection:
1. Pre-Installation Meeting. For all sections where pre-installations are defined, the
Contractor shall arrange for a pre-installation meeting. When practical, pre-installation
meetings shall be scheduled to take place on the same day as regularly schedule progress
meetings. The Contractor shall make available, during this meeting, all approved
submittals and products.
a. Agenda to include the following:
i. Appointment
ii. Appointment of official representatives of participants in the Project.
iii. Review of existing conditions and affected work, and testing thereof as
required.
iv. Review of installation procedures and requirements.
v. Review of environmental and site condition requirements.
vi. Schedule of the applicable portions of the Work.
vii. Schedule of submission of samples, color chips, and items for Owners
consideration.
viii. Requirements for temporary facilities, site sign, offices, storage sheds,
utilities, fences, Section 01500.
ix. Requirements for notification for reviews. Allow a minimum of 48 hour
notice to Architect for review of the Work.
CORNELL UNIVERSITY SECTION 01 45 00
Ithaca, New York QUALITY CONTROL
RPCC MAIL CENTER QUALITY CONTROL 01 45 00-2
RENOVATION May 21, 2019
x. Requirements for inspections and tests, as applicable. Schedule and
undertake inspections and tests in accordance with Section 01410.
xi. Delivery schedule of specified equipment.
xii. Special safety requirements and procedures.
b. The following minimum personnel shall be at the meeting:
i. Project Manager.
ii. Project Field Supervisor
iii. Subcontractor
iv. Architect’s Representative
v. Owner’s Representative
2. Preparatory Inspection. Perform this inspection prior to beginning work on any
definable feature of work. Include a review of contract requirements with the
supervisors directly responsible for the performance of the work; check to assure that
materials, products, and equipment have been tested, submitted, and approved; check
to assure that provisions have been made for required control testing; examine the work
area to ascertain that preliminary work has been completed; physically examine
materials and equipment to assure that they conform to shop drawings and data and that
the materials and equipment are on hand.
3. Initial Inspection. Perform this inspection as soon as work commences on a
representative portion of a particular feature of workmanship review control testing for
compliance with contract requirements.
4. Follow-up Inspections. Perform these inspections on a regular basis to assure
continuing compliance with contract requirements until completion of that particular
work.
1.3 CONTROL OF OFF-SITE OPERATIONS
A. Perform factory quality control inspections for items fabricated or assembled off-site as
opposed to "off-the-shelf" items. The CQC Representative at the fabricating plant shall be
responsible for release of the fabricated items for shipment to the job site. The CQC
Representative at the job site shall receive the item and note any damage incurred during
shipment. The Contractor shall be responsible for protecting and maintaining the item in
good condition throughout the period of on-site and during erection or installation. Although
any item found to be faulty may be rejected before its use, final acceptance of an item by the
Owner is based on its satisfactory incorporation into the work and acceptance of the
completed project.
CORNELL UNIVERSITY SECTION 01 45 00
Ithaca, New York QUALITY CONTROL
RPCC MAIL CENTER QUALITY CONTROL 01 45 00-3
RENOVATION May 21, 2019
1.4 TESTING
A. The Owner may engage the services of an independent testing laboratory to confirm that an
installed item or element of work conforms to the Specification and workmanship
requirements.
1.5 OWNER'S REPRESENTATIVE
A. The Owner shall designate a Representative to monitor the progress and execution of the
work. The Representative shall have the authority to call for test samples, to approve or to
reject work performed and to stop work in progress, if, in its opinion, the work is not in
conformance with the Contract Documents. The Representative shall not be authorized to
make changes or interpretations of the Contract Documents.
1. The Contractor shall maintain a project Deficiency/Issues Log in e-Builder to track non-
conforming materials or sub-standard workmanship identified by Owner’s
Representative.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 45 00***
CORNELL UNIVERSITY SECTION 01 50 00
Ithaca, New York TEMPORARY FACILITIES AND CONTROLS
RPCC MAIL CENTER TEMPORARY FACILITIES AND CONTROLS 01 50 00-1
RENOVATION May 21, 2019
SECTION 01 50 00 TEMPORARY FACILITIES AND CONTROLS
1.0 GENERAL
1.1 DESCRIPTION
A. The Contractor shall furnish, install and maintain all temporary facilities and services of every
kind, as required by the Contractor and by its subcontractors for their performance of the
Work and compliance with the Contract Documents, and shall remove such facilities and
complete such services upon the completion of all other work, or as Cornell University may
direct.
B. The Contractor shall obtain all required permits and approvals for and shall provide,
construct, or install, as well as operate, maintain, service and remove temporary facilities and
services.
1.2 REQUIREMENTS OF REGULATORY AGENCIES
A. Comply with Federal, State and local codes and safety regulations.
2.0 PRODUCTS
2.1 MATERIALS, GENERAL
A. Choice of materials, as suitable for the accomplishment of the intended purpose, is the
Contractor’s option.
B. Materials may be new or used, but must not violate requirements of applicable codes,
standards and specifications.
2.2 TEMPORARY FIRST AID FACILITIES
A. Provide first aid equipment and supplies, with qualified personnel continuously available to
render first aid at the site.
B. Provide a sign, posted at the telephone, listing the telephone numbers for emergency medical
services: Physicians, ambulance services and hospitals.
2.3 TEMPORARY FIRE PROTECTION
A. Provide a fire protection and prevention program for employees and personnel at the site.
Any fire watches as a result of construction operations are the responsibility of the Contractor.
Comply with NFPA 241. Develop, manage, and supervise an overall fire-prevention and -
protection program for personnel at Project site. Review needs with local fire department and
establish procedures to be followed. Instruct personnel in methods and procedures. Post
warnings and information.
CORNELL UNIVERSITY SECTION 01 50 00
Ithaca, New York TEMPORARY FACILITIES AND CONTROLS
RPCC MAIL CENTER TEMPORARY FACILITIES AND CONTROLS 01 50 00-2
RENOVATION May 21, 2019
1. Impairments “Fire Code of NYS Section 901.7”. Impairment; “the removal of fire
alarm devices or sprinkler system coverage in a building.” There are two different
levels of impairments
a. Partial Impairment. The removal of fire alarm devices or sprinkler system
coverage via control valve in the immediate area of where work is to be
performed.
- Basic Impairment Notification will be sent to Local Authority Having
Jurisdiction and FM Global.
- No fire watch will be required in most cases.
b. Full System Impairment. The complete removal of a fire alarm “system” or
sprinkler “system”. Impairment of both the fire alarm system and sprinkler
system at the same time is not allowed.
- Full System Impairment Notification will be sent to local Authority Having
Jurisdiction, FM Global, Ithaca Fire Department Officers, Building
Manager, Maintenance Manager, and Customer Service.
- Fire Watch will be required and will need the Fire Watch Person’s name and
contact information. Cornell EH&S does not perform the fire watch, it is
the responsibility of the Contractor.
B. Equipment:
1. Provide and maintain fire extinguishing equipment ready for instant use at all areas of
the Project and at specific areas of critical fire hazard.
2. Hand extinguishers of the types and sizes recommended by the National Board of Fire
Underwriters to control fires from particular hazards.
3. Construction period use of permanent fire protection system.
4. Water hoses connected to an adequate water pressure and supply system to reach each
area or level of construction upon building enclosure or heating of the building.
5. Maintain existing standpipes and hoses for fire protection. Provide additional
temporary hoses where required to comply with requirements. Hang hoses with a
warning sign stating that hoses are for fire-protection purposes only and are not to be
removed. Match hose size with outlet size and equip with suitable nozzles. Provide
hoses of sufficient length to protect construction areas.
6. Maintain unobstructed access to fire extinguishers, fire hydrants, siamese connections,
standpipes, temporary fire-protection facilities, stairways, and other access routes for
firefighting.
7. Where existing or temporary fire protection services are being replaced with new fire
protection services, do not remove or impair existing or temporary services until new
services are placed into operation and use.
CORNELL UNIVERSITY SECTION 01 50 00
Ithaca, New York TEMPORARY FACILITIES AND CONTROLS
RPCC MAIL CENTER TEMPORARY FACILITIES AND CONTROLS 01 50 00-3
RENOVATION May 21, 2019
8. At earliest feasible date in each area of Project, complete installation of permanent fire-
protection facility and systems, including connected services, and place into operation
and use. Instruct key personnel on use of facilities. Protect and maintain permanent
fire protection system. Repair or replace any components damaged during
construction.
C. Enforce fire-safety discipline:
1. Store combustible and volatile materials in an isolated, protected location.
2. Avoid accumulations of flammable debris and waste in or about the Project.
3. Prohibit smoking in the vicinity of hazardous conditions.
4. There is NO SMOKING allowed on construction sites located in any occupied building.
Smoking is prohibited in all Cornell University buildings.
5. Closely supervise welding and torch-cutting operations in the vicinity of combustible
materials and volatile conditions.
6. Supervise locations and operations of portable heating units and fuel.
D. Maintain fire extinguishing equipment in working condition, with current inspection
certificate attached to each extinguisher.
E. Welding or burning operations shall be conducted under a Hot Work Permit issued in
accordance with Section 01 41 00. Where such work is permitted, the Contractor shall
provide an approved fire extinguisher in good operating condition within easy reach of the
operating personnel. In each instance, obtain prior approval of Cornell University
Environmental Health & Safety.
F. Advise Cornell University Environmental Health & Safety of any items affecting Life Safety,
e.g., road blockages, exit closing, etc.
2.4 CONSTRUCTION AIDS
A. Provide construction aids and equipment required to assure safety for personnel and to
facilitate the execution of the Work; Scaffolds, staging, ladders, stairs, ramps, runways,
platforms, railings, hoists, cranes, chutes, fall protection, harness, tie-off points, and other
such equipment.
B. When permanent stair framing is in place, provide temporary treads, platforms and railings,
for use by construction personnel.
C. Maintain all equipment in a safe condition.
2.5 SUPPORTS
A. The Contractor shall include cost of all materials and labor necessary to provide all supports,
beams, angles, hangers, rods, bases, braces, etc. to properly support the Contract Work. All
supports, etc. shall meet the approval of the Architect.
CORNELL UNIVERSITY SECTION 01 50 00
Ithaca, New York TEMPORARY FACILITIES AND CONTROLS
RPCC MAIL CENTER TEMPORARY FACILITIES AND CONTROLS 01 50 00-4
RENOVATION May 21, 2019
B. Any and all supports that are of “custom” fabrication or installation shall be designed by the
Contractor’s NYS licensed PE with stamped & signed shop drawings and calculations
provided for same.
2.6 TEMPORARY ENCLOSURES
A. Provide temporary weather-tight enclosure for building exterior, maintain in-place until
installation of permanent enclosures. Provide temporary weather-tight enclosure of exterior
walls as work progresses for protection of construction, in progress and completed, from
exposure, foul weather, other construction operations, and similar activities, and as necessary
to provide acceptable working conditions, provide weather protection for interior materials,
provide weather protection for occupied areas, allow for effective temporary heating, and to
prevent entry of unauthorized persons.
1. Provide temporary exterior doors with self-closing hardware and padlocks or locksets.
2. Other enclosures shall be removable as necessary for work and for handling of
materials.
3. Where heating or cooling is needed and permanent enclosure is incomplete, insulate
temporary enclosures.
4. Coordinate enclosure with ventilation requirements, material drying or curing
requirements, and specified environmental limitations to avoid dangerous or
detrimental conditions and effects.
B. Provide temporary enclosures to separate work areas from areas of the existing building
occupied by Owner; to prevent penetration of dust or moisture into occupied areas, to prevent
damage to existing equipment, and to protect Owner's employees and operations from
construction work.
1. Temporary partition and ceiling enclosures: Framing and sheet materials which comply
with structural and fire rating requirements of applicable codes and standards.
a. Close joints between sheet materials, and seal edges and intersections with
existing surfaces, to prevent penetration of dust or moisture.
b. In locations where fire protection is required, paint both sides of partitions and
ceilings with fire-retardant paint as required by local fire regulations.
2. Do not remove existing exterior enclosure systems until new exterior enclosure
systems are ready for installation. Complete removal of existing exterior enclosure
systems as soon as possible. Immediately after completing removal, install new
exterior enclosure systems and complete installation as soon as possible.
3. Do not remove existing HVAC systems connected to louvers at existing exterior
enclosure systems until new HVAC systems and louvers at exterior enclosure systems
are ready for installation. Complete removal of existing HVAC systems and louvers
as soon as possible. Immediately after completing removal, install new HVAC systems
and new louvers and complete installation as soon as possible.
CORNELL UNIVERSITY SECTION 01 50 00
Ithaca, New York TEMPORARY FACILITIES AND CONTROLS
RPCC MAIL CENTER TEMPORARY FACILITIES AND CONTROLS 01 50 00-5
RENOVATION May 21, 2019
2.7 TEMPORARY WATER CONTROL
A. The Contractor shall provide, maintain and operate pumps required to keep the Work free of
water at all times.
B. Dispose of all water with due care and shall not infringe on the rights of others on the Site, of
adjacent property owners and of the public. All cost in connection with the removal of such
water shall be paid by the Contractor.
2.8 PERSONNEL, PUBLIC AND EMPLOYEE PROTECTION
A. Provide guardrails, barricades, fences, footways, tunnels and other devices necessary to
protect all personnel, employees, and the public, against hazards on, adjacent to or accessing
the construction site.
1. Provide signs, warning lights, signals, flags and illumination as necessary to alert
persons to hazards and to provide safe, adequate visibility in areas of hazards.
2. Closed sidewalks need to be indicated with OSHA-approved signs, as well as, proper
barricades.
3. Provide flag personnel as necessary to guide vehicles, protect personnel, public and
employees.
2.9 ACCESS ROADS AND PARKING AREAS
A. Provide adequate temporary roads and walks to achieve all-weather access into the site from
public thoroughfares, and within and adjacent to the site as necessary to provide uninterrupted
access to field offices, work and storage areas.
B. Grade and provide drainage facilities to assure runoff of rainwater and to avoid blockage of
flow from adjacent areas.
C. During dry weather wet down temporary unpaved areas when necessary to prevent blowing
dust.
2.10 PROJECT IDENTIFICATION AND SIGNS
A. No Contractor signs to be displayed at the project site, unless authorized by the Owner.
B. Owner Construction Project Sign. The Contractor shall install Owner provided project
identification signage.
2.11 SECURITY
A. The Contractor shall provide security services as required to protect the interests of the
Owner.
CORNELL UNIVERSITY SECTION 01 50 00
Ithaca, New York TEMPORARY FACILITIES AND CONTROLS
RPCC MAIL CENTER TEMPORARY FACILITIES AND CONTROLS 01 50 00-6
RENOVATION May 21, 2019
2.12 FIELD OFFICES
A. The Owner shall designate a space within the facility to serve as a field office for the use of
the Contractor and Owner.
3.0 EXECUTION
3.1 PREPARATION
A. Consult with Owner, review site conditions and factors which affect construction procedures
and temporary facilities, including adjacent properties and public facilities which may be
affected by execution of the work.
1. Designate the locations and extent of temporary construction, storage, and other
temporary facilities and controls required for the expeditious accomplishment of the
Work.
2. Allow space for use of the site by Owner and by other contractors, as required by
Contract Documents.
3.2 GENERAL
A. Comply with applicable requirements specified in sections of Division 02 through 40.
B. Make work structurally, mechanically and electrically sound throughout.
C. Install work in a neat and orderly manner.
D. Maintain, clean, service and repair facilities to provide continuous usage, and to the quality
specified for the original installation.
E. Relocate facilities as required by progress of construction, by storage or work requirements,
and to accommodate requirements of Owner and other contractors employed at the site.
F. Keep the site, at all times during the progress of the Work, free from accumulation of waste
matter or rubbish and shall confine its apparatus, materials and operations of its workers to
the limits prescribed except as the latter may be extended with the approval of the Owner’s
Representative. Cleaning of the structure or structures must be performed daily and removal
of waste matter or rubbish must be performed at least once a week.
G. Contractor shall at all times keep access road and public roads clean of mud and construction
debris and maintain dust control to the satisfaction of the Owner.
3.3 REMOVAL
A. Completely remove temporary structures, materials, equipment and services:
1. When construction needs can be met by use of permanent construction.
2. At completion of the Project.
CORNELL UNIVERSITY SECTION 01 50 00
Ithaca, New York TEMPORARY FACILITIES AND CONTROLS
RPCC MAIL CENTER TEMPORARY FACILITIES AND CONTROLS 01 50 00-7
RENOVATION May 21, 2019
B. Repair damage caused by installation or use of temporary facilities. Clean after removal.
C. Restore existing or permanent facilities used for temporary purposes to specified, or to
original condition.
1. Remove foundations and underground installations for temporary construction and
utilities.
2. Grade the areas of the site affected by temporary installations to required elevations and
slopes, and clean the area.
***END OF SECTION 01 50 00***
CORNELL UNIVERSITY SECTION 01 51 00
Ithaca, New York TEMPORARY UTILITIES
RPCC MAIL CENTER TEMPORARY UTILITIES 01 51 00-1
RENOVATION May 21, 2019
SECTION 01 51 00 TEMPORARY UTILITIES
1.0 GENERAL
1.1 DESCRIPTION
A. The Contractor shall furnish, install and maintain temporary utilities required by all trades for
construction. Remove on completion of Work.
B. The Contractor shall provide all labor and materials for temporary connections and
distribution.
1.2 REQUIREMENTS OF REGULATORY AGENCIES
A. Comply with National Electric Code, current edition.
B. Comply with Federal, State and local codes and safety regulations and with utility company
requirements.
2.0 PRODUCTS
2.1 MATERIALS, GENERAL
A. Materials may be new or used, but must be adequate in capacity for the required usage, must
not create unsafe conditions, and must not violate requirements of applicable codes and
standards.
2.2 TEMPORARY ELECTRICITY, LIGHTING AND WATER
A. The Contractor shall have access to the Owner's water and electric power for constructing the
Work. Temporary utility connections shall be made by the Contractor as close to its
operations as possible as long as such connections do not over-load the capacity of the
Owner's utilities or interfere with its customary utilization thereof. Utility access points shall
be determined in cooperation with and acceptable to the Owner.
B. The Contractor shall be responsible for the economic use of the Owner's Water and Power.
The Owner will pay for the water and power consumed in the construction of the Work as
long as economical usage of these utilities is maintained. The Owner reserves the right to
meter and charge for the power and water consumed if in the opinion of the Owner the usage
of these utilities is not economically conducted by the Contractor. In such an event, the
Owner shall give three (3) days written notice to the Contractor of its intentions to meter and
charge for temporary utilities used by the Contractor.
C. All temporary power systems including wiring shall be removed by the Contractor when no
longer required.
CORNELL UNIVERSITY SECTION 01 51 00
Ithaca, New York TEMPORARY UTILITIES
RPCC MAIL CENTER TEMPORARY UTILITIES 01 51 00-2
RENOVATION May 21, 2019
D. The minimum temporary lighting to be provided is at the rate of fifty foot candles, is to be
maintained in each room and changed as required when interior walls are being erected. The
required temporary lighting must be maintained for twenty-four (24) hours a day and seven
(7) days a week at all stair levels and in all corridors below ground; in any and all egress; in
all other spaces temporary lighting is to be maintained only during working hours. All
temporary wiring and equipment shall be in conformity with the National Electric Code.
E. The minimum temporary outdoor security lighting to be provided is as follows:
1. Along the perimeter of the site fence, consisting of vandal-resistant light fixtures with
HID lamps, located 150 foot center, mounted on the inside of the construction fence.
2. Lighting for temporary pedestrian paths and roadways, to provide a minimum of 0.1
foot-candle on the path of travel.
F. Three-phase temporary power circuits shall be installed as required to operate construction
equipment of the various trades and to Install and test equipment such as pumps and elevators.
The Contractor shall install and maintain temporary or permanent service for the permanently
installed building equipment such as sump pumps, boilers, boiler controls, fans, pumps, so
that such equipment may be operated when required and so ordered by the Owner's
Representative for drainage or for temporary heat.
G. Except as otherwise provided in the Contract, the Contractor shall submit to the Owner or the
Owner's Representative for approval a proposed schedule of all utility shutdowns and
cutovers of all types which may be required in connection with the Work. Such schedule
shall provide a minimum of four (4) weeks advance notice to the Owner prior to the time of
the proposed shutdown and cutover. The Contractor shall be responsible for all charges
relating to shutdowns.
H. Discontinuance, Changes and Removal
The Contractor shall:
1. Discontinue all temporary services required by the Contract when so directed by the
Owner or the Owner's Representative. The discontinuance of any such temporary
service prior to the completion of the Work shall not render the Owner liable for any
additional cost entailed thereby.
2. Remove and relocate such temporary facilities as directed by the Owner or the Owner's
Representative, and shall restore the Site and the Work to a condition satisfactory to the
Owner.
2.3 TEMPORARY USE OF ELEVATOR
A. Use of Existing Elevator
1. If the Contractor elects to use the existing elevator equipment, the Contractor shall:
a. Provide adequate protection for such equipment and shall operate such equipment
within a capacity not to exceed that allowed by law, rule or regulation.
CORNELL UNIVERSITY SECTION 01 51 00
Ithaca, New York TEMPORARY UTILITIES
RPCC MAIL CENTER TEMPORARY UTILITIES 01 51 00-3
RENOVATION May 21, 2019
b. Prior to start of construction, accurately record the condition of the existing
elevator. Promptly repair or replace items that are damaged as a result of
Contractor’s use. Service calls that arise as a result of Contractor misuse will be
charged to the Contractor. At Substantial Completion, restore elevators to
condition existing before initial use.
c. Use only elevators designated by Owner’s Representative at dates and times
designated by Owner’s Representative. Dates and times available for
Contractor’s use shall be scheduled with, and at the convenience of, the Owner,
and may vary during the course of the Project.
d. Owner will not provide elevator operators or other monitoring of elevator use.
e. Do not load elevators beyond their rated weight capacity.
f. Provide code compliant protective coverings, barriers, devices, signs, or other
procedures to protect elevator car and entrance doors and frame. If, despite such
protection, elevators become damaged, engage elevator maintenance contractor
to restore damaged work so no evidence remains of correction work. Return items
that cannot be refinished in field to the shop, make required repairs and refinish
entire unit, or provide new units as required.
g. Procure and coordinate the elevator maintenance contractor to gain access to the
elevator shaft as required to complete the work
2.4 TEMPORARY CONTRACTOR TELEPHONE SERVICE
A. Site Superintendent or their Representative shall carry a cellular telephone at all times.
B. Provide phone number to Cornell project representatives for communication during Work.
2.5 TEMPORARY SANITARY FACILITIES
A. The Owner shall designate sanitary facilities to be utilized by the Contractor during
construction. The Contractor shall maintain neat, clean and sanitary conditions. The
Contractor shall be responsible for costs associated with excessive custodial services
associated with such usage.
3.0 EXECUTION
3.1 REMOVAL
A. Completely remove temporary materials and equipment when their use is no longer required.
B. Clean and repair damage caused by temporary installations or use of temporary facilities.
C. Restore existing and permanent facilities used for temporary services to specified, or to
original, condition.
***END OF SECTION 01 51 00***
CORNELL UNIVERSITY SECTION 01 51 23
Ithaca, New York HEAT DURING CONSTRUCTION
RPCC MAIL CENTER HEAT DURING CONSTRUCTION 01 51 23-1
RENOVATION May 21, 2019
SECTION 01 51 23 HEAT DURING CONSTRUCTION
1.0 GENERAL
1.1 DESCRIPTION
A. The Contractor shall maintain existing or temporary building heating systems to accomplish
the following:
1. Protect the existing facility and facility plumbing systems against damage due to cold
temperatures.
2. Provide sufficient heat so that the Work can be accomplished in accordance with the
Contract Documents.
3. Maintain construction schedules as required by the Contract.
B. Include in the bid price an amount necessary to provide Construction Heat as required.
C. Existing central steam systems may be used to the extent that they do not interfere with the
safe and effective completion of Work. However, any modifications to existing systems shall
be corrected prior to the conclusion of work.
D. No natural gas is available to the facility for temporary heat.
E. At the conclusion of the project the facility heating systems shall be returned to functional
order as necessary to protect the building and facility plumbing systems.
1.2 RESPONSIBILITY
A. The Contractor shall include in the bid the cost of the temporary heat.
B. The Contractor shall be responsible for repairs to the facility necessitated by the failure to
provide heat during any portion of the Work.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 51 23***
CORNELL UNIVERSITY SECTION 01 66 00
Ithaca, New York STORAGE AND PROTECTION
RPCC MAIL CENTER STORAGE AND PROTECTION 01 66 00-1
RENOVATION May 21, 2019
SECTION 01 66 00 STORAGE AND PROTECTION
1.0 GENERAL
1.1 DESCRIPTION
A. Receive, pile, store and handle all materials, equipment and other items incorporated or to be
incorporated in the Work, including items furnished by the Owner in a careful and prudent
manner and shall protect them against loss or damage from every source.
B. Obscure from public view, in a manner acceptable to the Owner, staging and storage areas.
1.2 TRANSPORTATION AND HANDLING
A. Transport and handle products in accordance with manufacturer's instructions; using means
and methods that will prevent damage, deterioration, and loss, including theft.
B. Schedule delivery to minimize long-term storage at Project site and to prevent overcrowding
of construction space.
C. Coordinate delivery with installation time to ensure minimum holding time for items that are
flammable, hazardous, easily damaged, or sensitive to deterioration, theft, and other losses.
D. Deliver products to Project site in an undamaged condition in manufacturer's original sealed
container or other packaging system, complete with labels and instructions for handling,
storing, unpacking, protecting, and installation.
E. Promptly inspect shipments to assure that products comply with requirements, quantities are
correct and products are undamaged.
F. Provide equipment and personnel to handle products by methods to prevent soiling,
disfigurement or damage.
1.3 ON-SITE STORAGE
A. Materials stored on the Site shall be neatly piled and protected, and shall be stored in a neat
and orderly manner in locations that shall not interfere with the progress of the Work or with
the daily functioning of the Institution.
B. Materials subject to weather damage shall be protected against the weather by floored
weatherproof temporary storage sheds.
C. Comply with product manufacturer's written instructions for temperature, humidity,
ventilation, and weather-protection requirements for storage.
CORNELL UNIVERSITY SECTION 01 66 00
Ithaca, New York STORAGE AND PROTECTION
RPCC MAIL CENTER STORAGE AND PROTECTION 01 66 00-2
RENOVATION May 21, 2019
D. Storage piles and sheds shall be located within the area designated as the Staging Area. The
Contractor shall work to insure that the condition of the staging area has no negative impact
on the Campus, visually or otherwise; and that outside of that area. The Contractor has no
impact at all on the Campus.
E. Materials stored within the building shall be distributed in such a manner as to avoid
overloading of the structural frame, and never shall be concentrated in such a manner as to
exceed the equivalent of 50 pounds per square foot uniformly distributed loading. Stored
materials shall be moved if they interfere with the progress of the work.
F. Should it become necessary during the course of the Work to move stored materials or
equipment, the Contractor, at the direction of the Owner or the Owner's Representative, shall
move such materials or equipment.
1.4 PALM ROAD STORAGE
A. All property including construction materials and equipment stored at the Palm Road location
shall be stored at the Contractor’s sole risk. The Contractor is solely responsible for repair or
replacement of property due to any cause of loss.
B. The Contractor agrees to hold Cornell harmless from any accident or injury occurring at Palm
Road storage site associated with the Contractor’s storage.
C. The Contractor understands that Cornell makes “no” warranty regarding any security at the
Palm Road site.
D. The Contractor agrees that it is solely responsible for any cleanup of any site contamination
caused by the Contractor’s storage or storage operations and the Contractor agrees to pay for
cleanup of any contamination and restore the site back to the same condition it was found.
E. It shall be assumed that the Contractor is responsible for site contamination unless the
Contractor has reported condition prior to moving storage materials and equipment onto the
site. Each Contractor shall be responsible for their own general area whether defined formally
or not but in cases where pollutants have traveled or are found in the public areas used by all
contractors, the Contractor agrees as follows:
1. If it cannot be determined who is responsible for site contamination after an
investigation, all contractors who could be responsible based upon location of the
incident agree to share the expense of cleanup equally.
F. No storage of hazardous materials or environmental contaminants is permitted at the Palm
Road site. All barrels must have labels affixed identifying contents.
G. Unoccupied storage containers not within the project fence shall be labeled in the Cornell
standard. Signs customized for the project shall be ordered from Ithaca Plastics, Inc., 305
West Green Street, Ithaca, New York 14850, Phone - 607.272.8232, Fax - 607.277.2579,
Email – db@ithacaplastics.com.
CORNELL UNIVERSITY SECTION 01 66 00
Ithaca, New York STORAGE AND PROTECTION
RPCC MAIL CENTER STORAGE AND PROTECTION 01 66 00-3
RENOVATION May 21, 2019
1.5 PROTECTION
A. The Contractor shall provide security personnel and adopt other security measures as may be
necessary to adequately protect materials and equipment stored at the site. The Contractor
shall be obligated to replace or pay for all materials and equipment including items furnished
by the Owner which have been damaged or stolen prior to completion of the Work.
B. Protection of Utilities
1. If during the course of the Project, it is necessary to work adjacent to existing utilities,
pipelines, structures and equipment, the Contractor shall take all necessary precautions
to protect existing facilities from damage.
2. Locations of utilities as shown on the Contract Documents are approximate only. The
Contractor shall excavate or otherwise locate to verify existing utilities in advance of
its operation.
C. Protective Covering
1. All finished surfaces shall be protected by the Contractor as follows:
a. Door and window sills and the jambs and soffits of openings used as passageways
or through which material is handled, shall be cased and protected adequately
against possible damage resulting from the conduct of the work of all trades.
b. All surfaces shall be clean and not marred upon delivery of the building to the
Owner. The Contractor shall, without extra compensation, replace all blocks,
gypsum board, plaster, paint, tile, and all other surfaces, whether or not protected,
which are damaged, and shall refinish (including painting as specified) to
satisfaction of Owner.
c. Tight wood sheathing shall be laid under any materials that are stored on finished
concrete surfaces and planking must be laid before moving any materials over
these finished areas. Wheelbarrows used over such areas shall have rubber tires
on wheels.
d. Contractor has the responsibility for protection of carpeting and all finish flooring
during all phases of the work including after installation.
e. All floors exposed to view as a floor finish shall be protected by overlaying with
plywood in all areas subject to construction traffic within and without the
building, special care shall be taken to protect all stair finish surfaces including
but not limited to flooring, wood in-fill stairs, cabinetry, counters, equipment, etc.
2. HVAC ductwork shall be protected by the Contractor as follows to prevent introduction
of contaminants:
a. Ductwork with interior lining shall be wrapped at the factory using plastic wrap
to exclude moisture and contaminants. The wrapping shall not be removed until
immediately prior to installation.
CORNELL UNIVERSITY SECTION 01 66 00
Ithaca, New York STORAGE AND PROTECTION
RPCC MAIL CENTER STORAGE AND PROTECTION 01 66 00-4
RENOVATION May 21, 2019
b. Ductwork shall not be exposed to moisture or contaminants at any point in the
manufacturing, shipping, storage or installation process.
c. Ductwork shall not be staged or stored outside or otherwise exposed to the
weather.
d. Ductwork shall be transported only inside of covered vehicles.
e. Once installed, ductwork shall be protected from contamination during the
construction process.
1.6 PROTECTION AFTER INSTALLATION
A. Protect installed products, including Owner-provided products, and control traffic in
immediate area to prevent damage from subsequent operations.
B. Provide protective coverings at walls, projections, corners, and jambs, sills, and soffits of
openings in and adjacent to traffic areas.
C. Cover walls and floors of elevator cabins, and jambs of cab doors, when elevators are used
by construction personnel.
D. Protect finish floors and stairs from dirt, wear, and damage:
1. Secure heavy sheet goods or similar protective materials in place, in areas subject to
foot traffic.
2. Lay planking or similar rigid materials in place, in areas subject to movement of heavy
objects.
3. Lay planking or similar rigid materials in place, in areas where storage of products will
occur.
E. Protect waterproofed and roofed surfaces:
1. Restrict use of surfaces for traffic of any kind, and for storage of products.
2. When an activity is mandatory, obtain recommendations for protection of surfaces from
manufacturer. Install protection and remove on completion of activity. Restrict use of
adjacent unprotected areas.
F. Restrict traffic of any kind across planted lawn and landscape areas.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 66 00***
CORNELL UNIVERSITY SECTION 01 73 29
Ithaca, New York CUTTING, PATCHING AND REPAIRING
RPCC MAIL CENTER CUTTING, PATCHING AND REPAIRING 01 73 29-1
RENOVATION May 21, 2019
SECTION 01 73 29 CUTTING, PATCHING AND REPAIRING
1.0 GENERAL
1.1 DESCRIPTION
A. The Contractor shall be responsible for all cutting, fitting and patching, including excavation
and backfill, required to complete the Work or to:
1. Make its several parts fit together properly.
2. Uncover portions of the Work to provide for installation of ill-timed work.
3. Remove and replace defective work.
4. Remove and replace work not conforming to requirements of Contract Documents.
5. Remove samples of installed work as specified for testing.
6. Repair or restore existing or new surfaces and finishes to match adjacent existing or
new surfaces and finishes.
B. Upon written instructions of the Owner’s Representative:
1. Uncover designated portions of Work for Architect's observation of covered work.
2. Remove samples of installed materials for testing beyond that specified.
3. Remove work to provide for the alteration of previously incorrectly installed work.
4. Patch work uncovered or removed.
C. Do not damage or endanger any work by cutting or altering the Work or any part thereof.
D. Do not cut or otherwise alter the work of the Owner except with the written consent of the
Owner’s Representative.
E. Where cutting and patching involves adding reinforcement to structural elements, submit
details and engineering calculations showing integration of reinforcement with the original
structure.
F. Openings and Chases
1. Build openings, including but not limited to channels, chases and flues as required to
complete the Work as set forth in the Contract.
2. After installation and completion of any work for which openings have been provided,
build in, over, and around and finish all such openings as required to complete the Work.
CORNELL UNIVERSITY SECTION 01 73 29
Ithaca, New York CUTTING, PATCHING AND REPAIRING
RPCC MAIL CENTER CUTTING, PATCHING AND REPAIRING 01 73 29-2
RENOVATION May 21, 2019
3. Furnish and install all sleeves, inserts, hangers and supports required for the execution
of the Work.
1.2 SUBMITTALS
A. Submit a written request to the Architect prior to executing any cutting, alteration or
excavation which affects the work of the Owner, or which may affect the structural safety of
any portion of the Project. Include:
1. Identification of the Project.
2. Description of the affected work.
3. The necessity for doing the cutting, alteration or excavation.
4. The effect on the work of the Owner’s property, or on the structural integrity of the
Project.
5. Description of the proposed work:
a. The scope of cutting, patching, alteration, or excavation.
b. Contractor and trades who will execute the work.
c. Products proposed to be used.
d. The extent of refinishing to be done.
6. Alternatives to cutting, patching or excavation.
7. Designation of the responsibility for the cost of cutting and patching.
8. Written permission of any separate contractor whose work will be affected.
B. Should conditions of the work or the schedule indicate a change of products from the original
installation, submit a request for substitution as specified in Section 01 25 00 - Substitutions
and Product Options.
C. Submit a written notice to the Architect and the Owner designating the date and the time the
work will be uncovered.
1.3 QUALITY ASSURANCE
A. Requirements for Structural Work: Do not cut and patch structural elements in a manner that
would change their load-carrying capacity for load-deflection ratio.
1. Obtain written approval of the cutting and patching proposal before cutting and patching
structural elements, including but not limited to the following:
a. Foundation construction
b. Bearing and retaining walls
CORNELL UNIVERSITY SECTION 01 73 29
Ithaca, New York CUTTING, PATCHING AND REPAIRING
RPCC MAIL CENTER CUTTING, PATCHING AND REPAIRING 01 73 29-3
RENOVATION May 21, 2019
c. Structural concrete
d. Structural steel and lintels
e. Structural decking
f. Miscellaneous structural metals
g. Exterior wall back-up supports and anchoring systems
h. Piping, ductwork, vessels, and equipment supports
i. Equipment supports
B. Operational Limitations: Do not cut and patch operating elements or related components in
a manner that would result in reducing their capacity to perform as intended. Do not cut and
patch operating elements or related components in a manner that would result in increased
maintenance or decreased operation life or safety.
1. Obtain written approval of the cutting and patching proposal before cutting and patching
the following operating elements or safety related systems:
a. Primary operational systems and equipment
b. Air or smoke barriers
c. Water, moisture, or vapor barriers
d. Membranes and flashings
e. Fire protection systems
f. Control systems
g. Communication systems
h. Electrical wiring systems
i. Operating systems of special construction in MEP work
C. Visual Requirements: Do not cut and patch construction exposed on the exterior or in
occupied spaces in a manner that would, in the Owner’s opinion, reduce the building’s
aesthetic qualities. Do not cut and patch construction in a manner that would result in visual
evidence of cutting and patching. Remove and replace construction which was cut and
patched in a visually unsatisfactory manner at no expense to the Owner.
D. Waterproofing and Water Tightness: Do not cut or alter waterproofed walls or floors or any
structural members without written permission of the Owner.
1. Waterproofing and Roofing Membranes
a. Employ qualified contractors to accomplish all required cutting, patching, or
repairing of existing waterproofing and roofing membranes.
CORNELL UNIVERSITY SECTION 01 73 29
Ithaca, New York CUTTING, PATCHING AND REPAIRING
RPCC MAIL CENTER CUTTING, PATCHING AND REPAIRING 01 73 29-4
RENOVATION May 21, 2019
b. Before beginning cutting, patching or repairing of existing waterproofing and
roofing membranes, obtain approval of all materials, methods and contractor to
be used from the Owner and agency, or agencies, holding bond or
guarantee/warranty in force for membrane.
2. Water Tightness
a. The Contractor shall be responsible for water tightness of product, materials, and
workmanship, including work specified to be watertight and inferred by general
practice to be watertight.
b. All floors (slabs), walls, roof, glazing, windows, doors, sleeves through
foundation walls, flashings, and similar items shall be watertight.
c. If details or materials shown or specified are felt not satisfactory to produce water
tightness, the Contractor shall inform the Owner’s Representative before
installation and submit proposed substitution or alternative method for review and
approval. The Contractor shall execute approved change and make watertight at
no additional cost to the Owner.
1.4 WARRANTIES
A. Replace, patch, and repair material and surfaces cut or damaged by methods and with
materials in such a manner as not to void any warranties required or existing.
2.0 PRODUCTS
2.1 MATERIALS
A. Comply with the Contract Documents for each product involved.
B. Use materials identical to in-place or existing materials. For exposed surfaces, use materials
that visually match existing adjacent surfaces to the fullest extent possible. If identical
materials are unavailable or cannot be used, use materials whose installed performance will
equal or surpass that of in-place or existing materials, and will match visual appearance of in-
place or existing materials.
3.0 EXECUTION
3.1 INSPECTION
A. Inspect existing conditions of the Project, including elements subject to damage or to
movement during:
1. Cutting and patching.
2. Excavation and backfilling.
CORNELL UNIVERSITY SECTION 01 73 29
Ithaca, New York CUTTING, PATCHING AND REPAIRING
RPCC MAIL CENTER CUTTING, PATCHING AND REPAIRING 01 73 29-5
RENOVATION May 21, 2019
B. After uncovering work, inspect the conditions affecting the installation of products, or
performance of the work.
C. Report unsatisfactory or dubious conditions to the Architect in writing; do not proceed with
the work until the Architect has provided further instructions.
3.2 PREPARATION
A. Provide shoring, bracing and other support as necessary to assure the structural safety of that
portion of the Work.
B. Provide devices and methods to protect other portions of the Project from damage.
C. Provide for vertical and lateral support required to protect adjacent buildings and properties.
D. Provide protection from the elements for that portion of the Project which may be exposed
by cutting and patching work, including but not limited to pumping to maintain excavations
free from water.
E. Avoid interference with use of adjoining areas or interruption of free passage to adjoining
areas.
F. Avoid cutting existing pipe, conduit, or ductwork serving the building but scheduled to be
removed or relocated until provisions have been made to bypass them.
3.3 PERFORMANCE
A. General: Employ skilled workers to perform cutting and patching. Proceed with cutting and
patching at the earliest feasible time and complete without delay.
1. Cut existing construction to provide for installation of other components or performance
of other construction activities and the subsequent fitting and patching required to
restore surfaces to their original condition.
B. Cutting: Cut existing construction using methods which will assure safety, will be least likely
to damage elements retained or adjoining construction, and will provide proper surfaces to
receive new work.
1. In general, where cutting, use hand or small power tools designed for sawing or
grinding, not hammering and chopping. Cut holes and slots as small as possible, neatly
to size required, and with minimum disturbance of adjacent surfaces. Temporarily
cover openings when not in use.
2. To avoid marring existing finished surfaces, cut or drill from the exposed or finished
side into concealed surfaces.
3. Cut through concrete and masonry using a cutting machine, such as a carbon saw or a
diamond-core drill.
4. Comply with the requirements of applicable MEP work where cutting and patching of
services is required.
CORNELL UNIVERSITY SECTION 01 73 29
Ithaca, New York CUTTING, PATCHING AND REPAIRING
RPCC MAIL CENTER CUTTING, PATCHING AND REPAIRING 01 73 29-6
RENOVATION May 21, 2019
C. Patching: Patch with durable seams that are as invisible as possible. Comply with specified
tolerances.
1. Where feasible, inspect and test patched areas to demonstrate integrity of the
installation.
2. Restore exposed finishes of patched areas and extend finish restoration into retained
adjoining construction in a manner that will eliminate evidence of patching and
refinishing.
a. Where patching occurs in a painted surface, apply primer and intermediate paint
coats over patch and apply final paint coat over entire unbroken surface containing
patch. Provide additional coats until patch blends with adjacent surfaces.
3. Refinish entire surfaces as necessary to provide an even finish to match adjacent
finishes:
a. For continuous surfaces, refinish to nearest intersection.
b. For an assembly, refinish the entire unit.
4. When patching existing plaster finished walls and partitions, the Contractor shall utilize
plaster trim, lath and other metal components to match the integrity of the existing
system. All plaster finishes shall match existing finishes so as to provide a uniform
visual appearance.
5. Floors and Walls: Where walls or partitions that are demolished extend one finished
area into another, patch and repair floor and wall surfaces in the new space. Provide an
even surface of uniform finish color, texture, and appearance. Remove existing floor
and wall coverings and replace with new materials, if necessary, to achieve uniform
color and appearance.
a. Patch with durable seams that are as invisible as possible. Provide materials and
comply with installation requirements specified in other Sections of these
Specifications.
6. Ceilings: Patch, repair, or re-hang existing ceilings as necessary to provide an even-
plane surface of uniform appearance.
7. Concrete Masonry Units: Patch walls by toothing-in units using salvaged or new CMU
units matching in-place units for type and size. Match coursing patterns, mortar joint
profiles, and other features of in-place CMU walls. Use accessory materials compatible
with in-place materials.
8. Brick and Masonry: Patch walls by toothing-in units using salvaged or new brick and
masonry matching in-place brick and masonry units. Match coursing patterns, mortar
joint profiles, and other features of in-place brick and masonry walls. Use accessory
materials compatible with in-place materials.
CORNELL UNIVERSITY SECTION 01 73 29
Ithaca, New York CUTTING, PATCHING AND REPAIRING
RPCC MAIL CENTER CUTTING, PATCHING AND REPAIRING 01 73 29-7
RENOVATION May 21, 2019
9. Exterior Building Enclosure: Patch components in a manner that restores enclosure to
a weather-tight condition.
a. Existing Roofing: Comply with requirements of existing roofing manufacturer for
cutting and patching existing roofing system. Provide flashing and trim, base
sheets, base flashing, adhesives, insulation, blocking, substrate boards,
accessories, and other required items to patch roofing at penetrations and roof-top
mounted items.
D. Repairs: Where repairs to existing surfaces are required, patch to produce surfaces suitable
for new materials.
1. Completely fill holes and depressions in existing masonry walls that are to remain with
an approved masonry patching material applied according to manufacturer's written
recommendations.
E. Execute excavating and backfilling by methods which will assure safety, will prevent
settlement or damage to other work.
F. Execute fitting and adjustment of products to provide a finished installation to comply with
specified products, functions, tolerances and finishes.
G. Restore work which has been cut or removed; install new products to provide completed work
in accordance with requirements of Contract Documents.
H. The Contractor shall replace, repair and patch all surfaces of the ground and of any structure
disturbed by its operations and its Work which surfaces and structures are intended to remain
even if such operations and work are outside the property lines. Such replacement, repair and
patching shall be with like material and shall restore surfaces as they existed.
3.4 CLEANING
A. Clean area and spaces where cutting and patching are performed. Completely remove paint,
mortar, oils, putty, and similar items. Thoroughly clean piping, conduit, and similar features
before applying paint or other finishing materials. Restore damaged pipe covering to its
original condition.
B. Clean adjacent structures and improvements of dust, dirt, and debris caused by selective
demolition operations. Return adjacent areas to condition existing before selective
demolition operations began.
***END OF SECTION 01 73 29***
CORNELL UNIVERSITY SECTION 01 77 00
Ithaca, New York PROJECT CLOSEOUT
RPCC MAIL CENTER PROJECT CLOSEOUT 01 77 00-1
RENOVATION May 21, 2019
SECTION 01 77 00 PROJECT CLOSEOUT
1.0 GENERAL
1.1 INSPECTIONS
A. Substantial Completion:
1. Within a minimum of five (5) days prior to substantial completion, when the Work has
reached such a point of completion that the building or buildings, equipment and
apparatus can be occupied and used for the purpose intended, the Contractor shall
conduct a detailed inspection of the Work to ensure that all requirements of the Contract
have been met and that the Work is complete and is acceptable. Contractor shall prepare
and submit a list of items to be completed and corrected (Contractor's punch list),
indicating the value of each item on the list and reasons why the Work is incomplete.
2. After receipt of the Contractor’s initial punch list, the Architect will make an inspection
of the Work to determine that the Work is substantially complete and that requirements
of the Contract have been met and that the Work is sufficiently complete and is
acceptable for use. The Architect will submit a marked-up list of items to be completed
and/or corrected, inclusive of the Contractor’s punch list. The Architect shall prepare a
Certificate of Substantial Completion, on the basis of an inspection, when the Architect
has determined that the work is substantially complete.
3. A copy of the report of the inspection will be furnished to the Contractor as the
inspection progresses so that the Contractor may proceed without delay with any part
of the Work found to be incomplete or defective.
4. All work performed under a Fire Protection System Installation/Alteration Operating
Permit shall be inspected by the Ithaca Fire Department, or if so delegated by the Ithaca
Building Department.
a. A member of the Ithaca Fire Department shall witness all acceptance or
reacceptance testing of work performed under a Fire Protection System
Installation Operating Permit. All testing and inspections shall be in compliance
with the applicable NFPA codes as referenced by Section 906.1 of the Fire Code
of NYS.
b. Work classified as a ‘Repair’ under the Existing Building Code does not require
the Ithaca Fire Department to witness the testing of the affected systems. Systems
that have been repaired must still be tested as required by the Fire Code of NYS
and NFPA.
c. The Ithaca Fire Department Shall Witness the Acceptance or Reacceptance
Testing for the Following Conditions:
- Testing of any new installation of a fire alarm, fire suppression, or fire
detection system as required by the Fire Code of New York State.
CORNELL UNIVERSITY SECTION 01 77 00
Ithaca, New York PROJECT CLOSEOUT
RPCC MAIL CENTER PROJECT CLOSEOUT 01 77 00-2
RENOVATION May 21, 2019
- Hydrostatic testing of sprinkler system where the modification affects more
than twenty (20) sprinkler heads and the modified area can be isolated from
the rest of the system
- Installation or replacement of a fire pump or drive elements of the fire pump.
- A Fire Alarm System with added or deleted components.
- A Fire Alarm System where the wiring or control circuits have been
modified.
- A Fire Alarm System where the control unit (Fire Alarm Panel) has been
replaced or the control unit software has been replaced.
- A smoke control system where the master control unit, individual fan
control unit, or fan drive unit has been replaced or modified
- An alternative fire suppression system that has been replaced or the
actuation elements have been modified. Except: fusible link replacement.
- A modification or extension of the piping for a fire standpipe system where
a hydrostatic test is required by NFPA 14.
B. Final Acceptance:
1. When the items appearing on the report of inspection have been completed or corrected,
the Contractor shall so advise the Architect. After receipt of this notification and
Contractor’s certified list of completed items, the Owner's Representative will inform
the Contractor of the date and time of final inspection. A copy of the report of the final
inspection containing all remaining contract exceptions, omissions and incomplete
work will be furnished to the Contractor.
2. After receipt of notification of completion and all remaining contract exceptions,
omissions and incomplete work from the Contractor, the Architect will make an
inspection to verify completion of the exception items appearing on the report of final
inspection.
1.2 SUBMITTALS
A. Contractor's List of Incomplete Items: Initial punch list submittal at Substantial Completion.
1. Organize list of spaces in sequential order, starting with exterior areas first and
proceeding from lowest floor to highest floor, listing by room or space number.
Organize items applying to each space by major element, including categories for
individual exterior face elevations, ceilings, individual walls, floors, doors, roof levels,
casework, equipment, and building systems.
B. Contractor's Certified List of Completed Items: Final signed punch list submittal at Final
Completion.
C. Certificates of Release: Occupancy permits from authorities having jurisdiction.
CORNELL UNIVERSITY SECTION 01 77 00
Ithaca, New York PROJECT CLOSEOUT
RPCC MAIL CENTER PROJECT CLOSEOUT 01 77 00-3
RENOVATION May 21, 2019
1.3 FINAL CLEAN UP
A. Upon completion of the work covered by the Contract the Contractor shall leave the
completed Project ready for use and occupancy without the need of further cleaning of any
kind and with all Work in new condition and in perfect order. In addition, upon completion
of all Work the Contractor shall remove from the vicinity of the Work all plant, buildings,
rubbish, unused materials, concrete forms and other materials belonging to him or used under
its direction during construction or impairing the use or appearance of the property and shall
restore such areas affected by the work to their original condition, and, in the event of its
failure to do so, the same shall be removed by the Owner at the expense of the Contractor,
and the Contractor and/or its surety shall be liable therefore. Final clean-up shall include but
not be limited to the following:
1. All finished surfaces shall be swept, dusted, washed and polished. This includes
cleaning of the Work of all finishing trades where needed, whether or not cleaning by
such trades is included in their respective sections of the specifications.
2. Roofs, utility tunnels, manholes and pipe trenches and spaces between the new and
existing Work shall be left thoroughly cleaned.
3. Finished flooring shall be thoroughly cleaned in accordance with the manufacturer’s
recommendations.
4. Where the finish of floors has been marred or damaged in any space or area, the entire
floor of that space or area shall be refinished as recommended by the manufacturers of
the flooring.
5. All equipment shall be in an undamaged, bright, clean, polished and new appearing
condition.
6. All new glass shall be washed and polished, both sides. The Contractor shall be
responsible for all breakage of glass in the area of the Work from the commencement
of its activities until the building is turned over to Owner. The Contractor shall replace
all broken glass and deliver the entire building with all glazing intact and clean.
7. Provide new filters for all fan convectors after final cleaning.
8. Refer to exterior clean up. Remove paint and glazing compound from surfaces.
B. Clean adjacent structures and improvements of dust, dirt, and debris caused by construction
operations. Return adjacent areas to condition existing before construction operations began.
C. Cleaning of Renovated Duct Systems and Existing Duct Systems in Renovated Areas:
1. Cleaning work shall be performed by firm which has minimum three (3) years’
experience in mechanical cleaning of air systems. Work shall be done by skilled
mechanics, technicians and experienced supervisors.
2. Clean dirt, dust and debris from air units, associated equipment air ducts; sanitize same.
Cleaning shall include:
a. Cleaning of air unit’s supply, return and exhaust sections including coils, fans,
filter racks, outdoor air intake shaft, and interior surfaces.
CORNELL UNIVERSITY SECTION 01 77 00
Ithaca, New York PROJECT CLOSEOUT
RPCC MAIL CENTER PROJECT CLOSEOUT 01 77 00-4
RENOVATION May 21, 2019
b. Cleaning of dampers, heating coils, humidifiers, and similar devices in ductwork.
c. Marking of duct-mounted damper settings, prior to cleaning, and returning
dampers to marked positions after cleaning. This includes fire dampers, zone
dampers, balancing dampers and volume dampers.
d. Cleaning of terminal supply, return and exhaust grilles, registers and diffusers.
e. Cutting of access holes in ductwork for cleaning process, as well as sealing and
patching of same.
f. Removal of portions of duct system which cannot otherwise be thoroughly
cleaned, and replacement thereof.
g. Sealing of lined duct systems, upon completion.
h. Removal and reinstallation of ceiling panels, tiles, ceiling support tracks, and
other ceiling construction, as required to facilitate cleaning.
i. Providing access doors required to facilitate cleaning.
3. Cleaning shall meet National Air Duct Cleaners Association (NADCA) Standards,
capable of verification by NADCA Vacuum Test. Cleanliness shall be subject to
Architect’s visual review; provide re-cleaning as necessary to satisfy Architect
a. Cleaning methods may include vacuuming, brushing, mechanical brushing,
scraping, or air washing. Use method best suited for locations involved.
b. Do NOT use methods which could damage the system or the building.
c. Remove dirt, dust, lint and other accumulations by HEPA filtered air machine
capable of minimum 6000 cfm. Air machine shall operate to obtain 1250 fpm
across the work space. Use brushes, mechanical agitators or air whips to dislodge
contaminants to be collected by the air machine.
d. Cleaning shall begin at the furthest point of the return system and at the outdoor
air intake. Cleaning shall proceed toward the air handling equipment. Cleaning
shall finish at the furthest point of the supply ductwork.
1.4 MAINTENANCE STOCK
A. Turn over to Owner's Representative the maintenance stock specified. Contractor shall obtain
signed receipt from Owner's Representative for all maintenance stock.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 77 00***
CORNELL UNIVERSITY SECTION 01 78 22
Ithaca, New York FIXED EQUIPMENT INVENTORY
RPCC MAIL CENTER FIXED EQUIPMENT INVENTORY 01 78 22-1
RENOVATION May 21, 2019
SECTION 01 78 22 FIXED EQUIPMENT INVENTORY
1.0 GENERAL
1.1 FIXED EQUIPMENT INVENTORY
A. The Owner shall provide the Contractor with a list of Equipment Types to be inventoried and
an Excel template.
B. The Contractor shall populate the template (see Example Equipment List to be inventoried in
Section 1.2). Once populated, the Contractor shall electronically return to the list to the
Owner’s Representative. The initial data to be captured on each piece of equipment shall
include:
1. Name of Product
2. Equipment Classification
3. Manufacturer
4. Model Number
5. Serial Number
6. Cost
7. Location (including Building and Room Number)
8. Acquisition Date (Date of Installation)
C. The Owner shall from the Contractor provided data create a follow-up equipment Excel
template that contains the MAXIMO ID for the equipment with all the name plate and
specification fields for each type of equipment. This template shall then be returned to the
Contractor.
D. The Contractor shall be responsible for the initial labeling of the equipment and its’
disconnects with the MAXIMO ID using an electronic label maker. ID labels shall be in
close proximity to Equipment Identification information, visually locatable from the access
point to the equipment and on the face of disconnects.
E. The Contractor shall then populate the MAXIMO Equipment Specification Template with
the equipment nameplate, specification information, and warranty information. The
Contractor shall electronically submit the equipment data and any related documentation (i.e.
- O&M manuals) to the Owner’s Representative.
CORNELL UNIVERSITY SECTION 01 78 22
Ithaca, New York FIXED EQUIPMENT INVENTORY
RPCC MAIL CENTER FIXED EQUIPMENT INVENTORY 01 78 22-2
RENOVATION May 21, 2019
F. EXAMPLE EQUIPMENT LIST
• Building Equipment
• AC Drive/VSD
• Pump
• Condensate
• Glycol
• CWC
• HWC
• Fan
• Exhaust
• Supply
• Return
• Fan Coil
• VAV Box
• Motor
• Pump
• Fan
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 78 22***
CORNELL UNIVERSITY SECTION 01 78 23
Ithaca, New York OPERATING AND MAINTENANCE DATA
RPCC MAIL CENTER OPERATING AND MAINTENANCE DATA 01 78 23-1
RENOVATION May 21, 2019
SECTION 01 78 23 OPERATING AND MAINTENANCE DATA
1.0 GENERAL
1.1 DESCRIPTION
A. The Contractor shall compile product data and related information appropriate for Owner's
maintenance and operation of products furnished under the Contract.
1. Prepare operating and maintenance data as specified in this Section, as referenced in
other pertinent sections of Specifications and as necessary to operate the completed
work.
2. Operations and maintenance data, in final format, shall be available to the Owner prior
to substantial completion.
B. Instruct Owner's personnel in the maintenance of products and in the operation of equipment
and systems.
1.2 FORM OF SUBMITTALS
A. Prepare data in the form of an instructional manual for use by Owner's personnel.
B. Submit a CD with electronic .pdf files, upload electronic files to ePM system of complete
manual in final form.
1. Format:
a. Size: 8-1/2" x 11”.
b. Text: Manufacturer's, scanned .pdf and/or neatly typewritten Word file.
c. Drawings in electronic format
- Drawings are required in PDF format. Drawings shall be in AutoCAD v14
or higher format.
d. Provide fly-leaf for each separate product, and major component parts of
equipment.
- Provide type description of product, and major component parts of
equipment.
- Provide indexed PDF bookmarks.
- Provide a series of files organized in subdirectories with a summary index
with hyperlinks to the various documents.
CORNELL UNIVERSITY SECTION 01 78 23
Ithaca, New York OPERATING AND MAINTENANCE DATA
RPCC MAIL CENTER OPERATING AND MAINTENANCE DATA 01 78 23-2
RENOVATION May 21, 2019
e. Cover: Identify each volume with title "OPERATIONS AND MAINTENANCE
INSTRUCTIONS".
List:
- Title of Project
- Identity of separate structure as applicable.
- Identity of general subject matter covered in the manual.
1.3 CONTENT OF MANUAL
A. Table of contents, typewritten, for each volume, arranged in a systematic order.
1. Contractor, name of responsible principal, address and telephone number.
2. A list of each product required to be included, indexed to the content of the volume.
3. List, with each product, the name, address and telephone number of:
a. Subcontract or installer.
b. Maintenance contractor, as appropriate.
c. Identify the area of responsibility of each.
d. Local source of supply for parts and replacement.
4. Identify each product by product name and other identifying symbols as set forth in
Contract Documents.
B. Product Data:
1. Include only those sheets which are pertinent to the specific product.
2. Annotate each sheet to:
a. Clearly identify the specific product or part installed.
b. Clearly identify the data applicable to the installation.
c. Delete reference to inapplicable information.
C. Submittal Data:
1. Include a record copy of the final, approved product submittal. Record copy shall be a
clean copy (free of notes from the design professional) which has been updated to reflect
the “as-installed” system.
CORNELL UNIVERSITY SECTION 01 78 23
Ithaca, New York OPERATING AND MAINTENANCE DATA
RPCC MAIL CENTER OPERATING AND MAINTENANCE DATA 01 78 23-3
RENOVATION May 21, 2019
D. Drawings:
1. Supplement product data with drawings as necessary to clearly illustrate:
a. Relations of component parts of equipment and systems.
b. Control and flow diagrams.
2. Coordinate drawings with information on Record Documents to assure correct
illustration of completed installation.
3. Do not use Record Documents as maintenance drawings.
E. Written text, as required to supplement product data for the particular installation:
1. Organize in a consistent format under separate headings for different procedures.
2. Provide a logical sequence of instructions for each procedure.
F. Original copy of each warranty, bond and service contract issued.
1. Provide information sheet for Owner's personnel, give:
a. Proper procedures in the event of failure.
b. Instances which might affect the validity of warranties or bonds.
1.4 MANUAL FOR MATERIALS AND FINISHES
A. Submit electronic .pdf files, upload electronic files to ePM system.
B. Content, for architectural products, applied materials and finishes:
1. Manufacturer's data, giving full information on products:
a. Catalog number, size, and composition.
b. Color and texture designations.
c. Information required for reordering special-manufactured products.
d. Certification as to asbestos free
2. Instructions for care and maintenance:
a. Manufacturer's recommendation for types of cleaning agents and methods.
b. Cautions against cleaning agents and methods which are detrimental to the
product.
c. Recommended schedule for cleaning and maintenance.
CORNELL UNIVERSITY SECTION 01 78 23
Ithaca, New York OPERATING AND MAINTENANCE DATA
RPCC MAIL CENTER OPERATING AND MAINTENANCE DATA 01 78 23-4
RENOVATION May 21, 2019
C. Content, for moisture-protection and weather-exposed products:
1. Manufacturer's data, giving full information on products.
a. Applicable standards
b. Chemical composition
c. Details of installation
2. Instructions for inspection, maintenance, and repair.
D. Additional requirements for maintenance data: The respective sections of Specifications.
1.5 MANUAL FOR EQUIPMENT AND SYSTEMS
A. Submit electronic .pdf files, upload electronic files to ePM system.
B. Content, for each unit of equipment and system, as appropriate:
1. Description of unit and component parts.
a. Function, normal operating characteristics, and limiting conditions.
b. Performance curves, engineering data and tests.
c. Complete nomenclature and commercial number of all replaceable parts.
2. Operating procedures:
a. Start-up, break-in, routine and normal operating instructions.
b. Regulation, control, stopping, shut-down and emergency instructions.
c. Summer and winter operating instructions.
d. Special operating instructions.
3. Maintenance Procedures:
a. Routine operations.
b. Guide to "trouble-shooting".
c. Disassembly, repair and reassembly.
d. Alignment, adjusting and checking.
4. Servicing and lubrication required:
a. List of lubricants required.
5. Manufacturer's printed operating and maintenance instructions.
CORNELL UNIVERSITY SECTION 01 78 23
Ithaca, New York OPERATING AND MAINTENANCE DATA
RPCC MAIL CENTER OPERATING AND MAINTENANCE DATA 01 78 23-5
RENOVATION May 21, 2019
6. Description of sequence of operation by control manufacturer.
7. Original manufacturer's parts list, illustrations, assembly drawings and diagrams
required for maintenance.
a. Predicted life of parts subject to wear.
b. Items recommended to be stocked as spare parts.
8. As-installed control diagrams by controls manufacturer.
9. Each contractor's coordination drawings.
a. As-installed color coded piping diagrams.
10. Charts of valve tag numbers, with the location and function of each valve.
11. List of original manufacturer's spare parts, manufacturer's current prices, and
recommended quantities to be maintained in storage.
12. Other data as required under pertinent sections of Specifications.
C. Content, for each electric and electronic system, as appropriate:
1. Description of system and component parts:
a. Function, normal operating characteristics, and limiting conditions.
b. Performance curves, engineering data and tests.
c. Complete nomenclature and commercial number of replaceable parts.
2. Circuit directories of panel boards:
a. Electrical service.
b. Controls.
c. Communications.
3. As-installed color coded wiring diagrams.
4. Operating procedures:
a. Routine and normal operating instructions.
b. Sequences required.
c. Special operating instructions.
CORNELL UNIVERSITY SECTION 01 78 23
Ithaca, New York OPERATING AND MAINTENANCE DATA
RPCC MAIL CENTER OPERATING AND MAINTENANCE DATA 01 78 23-6
RENOVATION May 21, 2019
5. Maintenance procedures:
a. Routine operations.
b. Guide to "trouble-shooting".
c. Disassembly, repair and reassembly.
d. Adjustment and checking.
6. Manufacturer's printed operating and maintenance instructions.
7. List of original manufacturer's spare parts, manufacturer's current prices, and
recommended quantities to be maintained in storage.
8. Other data as required under pertinent sections of Specifications.
D. Additional requirements for operations and maintenance data: See the respective sections of
Specifications and General Conditions.
1.6 SUBMITTAL REQUIREMENTS
A. Submit through ePM system preliminary draft of proposed formats and outlines of contents
thirty (30) calendar days after approved submittals.
B. Submit completed data in final form twenty (20) calendar days prior the Acceptance Phase
of the Project.
C. Submit specified number of copies of approved data in final form prior to final acceptance.
1.7 INSTRUCTIONS OF OWNER'S PERSONNEL
A. Prior to final inspections or acceptance, fully instruct Owner's designated operating and
maintenance personnel in the operation, adjustment and maintenance of all products,
equipment and systems:
1. Instruction time shall be sufficient to fully instruct all shifts of the Owner's operating
and maintenance personnel.
B. Operations and maintenance shall constitute the basis of instruction:
1. Review contents of manual with personnel in full detail to explain all aspects of
operations and maintenance.
C. Submit typewritten statement, signed by each of Owner's Representatives who have been
instructed, describing:
1. Method of Instruction.
2. Equipment and Systems Operated.
3. Length of Instruction Period.
CORNELL UNIVERSITY SECTION 01 78 23
Ithaca, New York OPERATING AND MAINTENANCE DATA
RPCC MAIL CENTER OPERATING AND MAINTENANCE DATA 01 78 23-7
RENOVATION May 21, 2019
D. Contractor is fully responsible until final acceptance, even though operated by Owner's
personnel, unless otherwise agreed in writing.
1.8 OPERATING INSTRUCTIONS
A. List under clear plastic (1/8" thick) all operating, maintenance and starting precautions and
procedures to be followed by Owner for operating all systems and equipment.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 78 23***
CORNELL UNIVERSITY SECTION 01 78 36
Ithaca, New York WARRANTIES AND BONDS
RPCC MAIL CENTER WARRANTIES AND BONDS 01 78 36-1
RENOVATION May 21, 2019
SECTION 01 78 36 WARRANTIES AND BONDS
1.0 GENERAL
1.1 DESCRIPTION
The Contractor shall:
A. Compile specified warranties and bonds.
B. Compile specified service and maintenance contracts.
C. Co-execute submittals when so specified.
D. Review submittals to verify compliance with Contract Documents.
E. Submit to Architect for transmittal to Owner.
1.2 SUMMARY
A. This Section specifies general administrative and procedural requirements for warranties and
bonds required by the Contract Documents, including manufacturers standard warranties on
products and special warranties.
1. Refer to the General Conditions for terms of the Contractor's special warranty of
workmanship and materials.
2. General closeout requirements are included in Section 01 77 00 - "Project Closeout."
3. Specific requirements for warranties for the Work and products and installations that
are specified to be warranted, are included in the individual Sections of Divisions 2
through 40.
4. Certifications and other commitments and agreements for continuing services to Owner
are specified elsewhere in the Contract Documents.
B. Disclaimers and Limitations: Manufacturer's disclaimers and limitations on product
warranties do not relieve the Contractor of the warranty on the Work that incorporates the
products, nor does it relieve suppliers, manufacturers, and subcontractors required to
countersign special warranties with the Contractor.
1.3 DEFINITIONS
A. Standard Product Warranties are pre-printed written warranties published by individual
manufacturers for particular products and are specifically endorsed by the manufacturer to
the Owner.
CORNELL UNIVERSITY SECTION 01 78 36
Ithaca, New York WARRANTIES AND BONDS
RPCC MAIL CENTER WARRANTIES AND BONDS 01 78 36-2
RENOVATION May 21, 2019
B. Special Warranties are written warranties required by or incorporated in the Contract
Documents, either to extend time limits provided by standard warranties or to provide greater
rights for the Owner
1.4 QUALITY ASSURANCE
A. Use adequate care and diligence to review Contract Documents to identify detailed
requirements relating to warranties and bonds.
B. Verify that each item required for this submittal conforms with specified requirements.
1.5 WARRANTY REQUIREMENTS
A. In addition to standard and special warranties described in Divisions 2 through 40, Contractor
shall warrant Work included in this project, for a minimum period of one (1) year following
acceptance of a Certificate of Substantial Completion by Owner, to cover performance,
materials, workmanship and compliance with Contract Documents.
B. Corrective Work: Provide service within thirty (30) calendar days when requested by Owner.
Perform services during normal working hours, unless specifically directed otherwise by
Owner. Coordinate with Owner’s representative to schedule performance of corrective work.
Where designated service providers cannot perform corrective work within the Owner’s
required time frame, engage another qualified service provider. Submit a written statement to
Owner upon completion of corrective work; document work performed and list outstanding
items, if any.
1. When a completed breakdown of a piece of equipment occurs of the malfunction of a
system affects the environment or program involving 50 or more persons at a time
(employees and students combined), or creates a safety or security risk to the Owner,
an EMERGENCY may be declared by the Owner. The Owner may declare an
emergency as defined above at which time the service response must be within 4 hours
and may require action during non-normal working hours.
2. When an emergency condition occurs, the Owner may take immediate corrective action
to relieve the problem by making, a minimum as possible, temporary adjustments and/or
repairs when necessary to decrease the problem until the designated Contractor’s
representative can respond. These temporary adjustments and repairs will in no way
jeopardize the existing warranty.
3. The Owner’s service staff will advise the Contractor’s Representative of all temporary
adjustments and repairs done in relation to the malfunctioning equipment or facility.
4. If the Contractor fails to respond with actual service within four (4) hours, and/or the
necessary repairs or adjustments are not satisfactorily complete twenty-four (24) hours,
the Owner will have the authority to make the necessary repairs or adjustments and
charge the Contractor for parts and labor.
5. If all adjustments and repairs done by the Owner in relation to the above conditions are
done by authorized district personnel, there will be no negative effect of future
warranty claims.
CORNELL UNIVERSITY SECTION 01 78 36
Ithaca, New York WARRANTIES AND BONDS
RPCC MAIL CENTER WARRANTIES AND BONDS 01 78 36-3
RENOVATION May 21, 2019
C. Related Damages and Losses: When correcting failed or damaged warranted Work, remove
and replace other Work that has been damaged as a result of such failure or that must be
removed and replaced to provide access for correction of warranted Work.
D. Reinstatement of Warranty: When Work covered by a warranty has failed and been corrected
by replacement or rebuilding, reinstate the warranty by written endorsement. The reinstated
warranty shall be equal to the original warranty with an equitable adjustment for depreciation.
E. Replacement Cost: Upon determination that Work covered by a warranty has failed, replace
or rebuild the Work to an acceptable condition complying with requirements of Contract
Documents. The Contractor is responsible for the cost of replacing or rebuilding defective
Work regardless of whether the Owner has benefited from use of the Work through a portion
of its anticipated useful service life.
F. Owner's Recourse: Expressed warranties made to the Owner are in addition to implied
warranties, and shall not limit the duties, obligations, rights and remedies otherwise available
under the law. Expressed warranty periods shall not be interpreted as limitations on time in
which the Owner can enforce such other duties, obligations, rights, or remedies.
G. Contractor's Procurement Obligations: Do not purchase, subcontract for, or allow others to
purchase or subcontract for materials or units of Work for Project where a special project
guaranty, specified product warranty, certification, or similar commitment is required until it
has been determined that entities required to sign or countersign such commitments are
willing to do so.
H. Specific Warranty. Where a special warranty, certification, or similar commitment is
required on such Work or part of the Work, the Owner reserves the right to refuse to accept
the Work until the Contractor presents evidence that entities required to countersign such
commitments are willing to do so.
1.6 SUBMITTAL REQUIREMENTS
A. Submit written warranties to the Architect prior to the date certified for Substantial
Completion. If the Architect’s Certificate of Substantial Completion designates a
commencement date for warranties other than the date of Substantial Completion for the
Work, or a designated portion of the Work, submit written warranties upon request of the
Architect or Owner.
1. When a designated portion of the Work is completed and occupied or used by the
Owner, by separate agreement with the Contractor during the construction period,
submit properly executed warranties to the Architect and Owner within fifteen (15) days
of completion of that designated portion of the Work.
B. When a special warranty is required to be executed by the Contractor, or the Contractor and
a subcontractor, supplier or manufacturer, prepare a written document that contains
appropriate terms and identification, ready for execution by the required parties. Submit a
draft to the Owner through the Architect for acceptance prior to final execution.
CORNELL UNIVERSITY SECTION 01 78 36
Ithaca, New York WARRANTIES AND BONDS
RPCC MAIL CENTER WARRANTIES AND BONDS 01 78 36-4
RENOVATION May 21, 2019
1.7 SUBMITTALS REQUIRED
A. Submit warranties, bonds, and service and maintenance contracts as specified in the
respective sections of Specifications. Submit a schedule listing all required warranties.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION
3.1 FORM OF SUBMITTALS
A. The Warranties and Bonds shall be in electronic pdf format. Each submission shall include
the title of the Project and the name of the Contractor.
B. Provide a series of files organized in subdirectories with a summary index with hyperlinks to
the various documents and or references.
C. Assemble warranties, bonds and service and maintenance contracts, executed by each of the
respective manufacturers, suppliers and subcontractors.
D. Table of Contents: Neatly typed, in orderly sequence. Provide complete information for each
item.
1. Product or work item.
2. Item description.
3. Notation of what the equipment serves (e.g. – Provides perimeter heat)
4. Warranty Provider. Is the warranty provided by a manufacturer or installer?
5. Firm, with name of principal and responsible party, address and telephone number.
6. Scope.
7. Duration.
a. Date of beginning of warranty, bond or service and maintenance contract
b. End date of warranty, bond or service and maintenance contract.
8. Provide information for Owner's personnel:
a. Proper procedure in case of failure.
b. Instances which might affect the validity of warranty or bond.
9. Contractor, name of responsible principal, address and telephone number.
CORNELL UNIVERSITY SECTION 01 78 36
Ithaca, New York WARRANTIES AND BONDS
RPCC MAIL CENTER WARRANTIES AND BONDS 01 78 36-5
RENOVATION May 21, 2019
3.2 TIME OF SUBMITTALS
A. Make final submittals within ten (10) days after Date of Substantial Completion, prior to final
request for payment.
B. For items of work when acceptance is delayed materially beyond the Date of Substantial
Completion, provide updated submittal within ten (10) days after acceptance, listing the date
of acceptance as the start of the warranty period.
***END OF SECTION 01 78 36***
CORNELL UNIVERSITY SECTION 01 78 39
Ithaca, New York RECORD DOCUMENTS
RPCC MAIL CENTER RECORD DOCUMENTS 01 78 39-1
RENOVATION May 21, 2019
SECTION 01 78 39 RECORD DOCUMENTS
1.0 GENERAL
1.1 DESCRIPTION
A. The Contractor shall maintain at the site, during construction, one record copy of:
1. Drawings
2. Specifications
3. Addenda
4. Change Orders and other Modifications to the Contract
5. Architect's Field Orders or written instructions.
6. Final Shop Drawings, Product Data and Samples
7. Field Test records
8. Construction photographs
1.2 MAINTENANCE OF DOCUMENTS AND SAMPLES
A. Store documents and samples in Contractor's field office apart from documents used for
construction.
1. Provide files and racks for storage of documents.
2. Provide cabinet or storage space for storage of samples.
B. File documents and samples in accordance with Data Filing Format of the Uniform
Construction Index.
C. Maintain documents in a clean, dry, legible condition and in good order. Do not use record
documents for construction purposes.
D. Make documents and samples available at all times for review by the Owner’s Representative
and the Architect.
1.3 RECORDING
A. Label each document "AS BUILT" in neat large printed letters.
B. Record information concurrently with construction progress.
1. Do not conceal any work until required information is recorded.
CORNELL UNIVERSITY SECTION 01 78 39
Ithaca, New York RECORD DOCUMENTS
RPCC MAIL CENTER RECORD DOCUMENTS 01 78 39-2
RENOVATION May 21, 2019
C. Drawings
As built drawings shall consist of making any changes neatly and clearly on the Contract
Drawings using colored ink or pencil, shall be kept current by the contractor on a day-to-day
basis in concert with the progress of the work. Where applicable, the change marked on a
drawing is to carry the notation “per Change Order No. X”, or similar reference which cites
the reason for the change. As an alternative approach the Contractor can submit a plan for
producing the “As-Built” drawings via electronic mark-up in Bluebeam, Adobe Professional,
or other similar program as an alternative to colored pencil or ink mark-ups. Such plan shall
be subject to approval of the Owner.
The day-to-day construction as built drawings shall be made available to the Architect or
Owner’s Representative for review upon request. The "As built" drawings shall show all
changes to the following areas of construction:
1. Architectural:
a. Modifications to components dictated by the building code
b. Wall, door, window locations
c. Built in casework locations
d. New rated door and wall schedules/ locations
e. Material and products where submittals are requested
2. Civil and Structural
a. Dimensions for load carrying elements, both horizontal and vertical
b. Materials and products where submittals are requested
c. Load carrying elements and foundation systems
d. All significant changes in foundations, columns, beams, openings, concrete
reinforcing, lintels, concealed anchorages and "knock-out" panels made during
construction.
e. Items that will require future maintenance
f. Life safety critical items
3. Mechanical (HVAC, Plumbing and Fire Protection)
a. Products where submittals are requested
b. Final locations of all equipment.
c. Final sizes and materials of piping and ductwork.
d. Final locations of inaccessible piping and ductwork.
CORNELL UNIVERSITY SECTION 01 78 39
Ithaca, New York RECORD DOCUMENTS
RPCC MAIL CENTER RECORD DOCUMENTS 01 78 39-3
RENOVATION May 21, 2019
e. Final locations of all controls equipment, including all sensors and actuators.
f. Final locations of all valves and dampers, including all shutoff valves, balance
dampers and fire dampers.
g. Location of access doors for all equipment in concealed locations.
h. Final location and arrangement of all mechanical equipment and concealed gas,
sprinkler, domestic, sanitary and drainage systems piping and other plumbing,
including, but not limited to, supply and circulating mains, principal valves,
meters, clean-outs, drains, pumps and controls, vent stacks, sanitary and storm
water drainage.
4. Electrical
a. Products where submittals were requested.
b. Circuit (wire and raceway) size, number, and type.
c. Main circuit pathways for Fire Alarm, Emergency Power, and Access
Control/Security systems.
d. Final locations of equipment and devices, interior and exterior luminaires, and
power supplies.
e. Final location of electric signal system panels, final arrangement of all circuits
and any significant changes made in electrical signal system design as a result of
Change Order or job conditions.
5. Environmental
a. Utility related elements and supporting infrastructure
b. Location of unusual excavation findings / contaminated soil (i.e. mercury
uncovered during excavation, also on-site spills during construction), including
quantity excavated/disposed.
D. Specifications and Addenda
Legibly mark each section to record:
1. Manufacturer, trade name, catalog number, and Supplier of each product and item of
equipment actually installed.
2. Changes made by Field Order or by Change Order.
1.4 SUBMITTAL
A. At Contract close-out, deliver copies of all record documents to the Owner’s Representative.
CORNELL UNIVERSITY SECTION 01 78 39
Ithaca, New York RECORD DOCUMENTS
RPCC MAIL CENTER RECORD DOCUMENTS 01 78 39-4
RENOVATION May 21, 2019
B. Accompany submittal with transmittal letter in duplicate, containing:
1. Date
2. Project title and number
3. Contractor's name and address
4. Title and number of each record document
5. Certification that each document is complete and accurate
6. Signature of Contractor or its authorized representative.
2.0 PRODUCTS – NOT USED
3.0 EXECUTION – NOT USED
***END OF SECTION 01 78 39***